Near new 2014 TE449 Dual sport with only 540 miles, Oregon street legal plates tagged until 2022.
Brand new Golden front fatty and rear tires, FMF exhaust, rear blinker mod and Race Map 2.
This is a beautiful dual sport that is great on the road yet very aggressive in the dirt and single trails as well. Oil just changed and air cleaner cleaned and prepped.
It is nearly new and nicely modified as well
2017 HUSQVARNA 701 ENDURO, 701 ENDURO! We are a Credit Union Direct Lender offering many options for finance. Our vehicles are safety inspected and most qualify for extended service contracts. Our professional staff is here to help you with all your buying needs. Give us a call to set up an appointment or come into our showroom for more information. You can also visit our website at www.procaliberbend.com . COPY THE LINE BELOW INTO YOUR URL FOR FINANCING!!!https://s17965.endeavorsecure.com/financing.htmWE PAY TOP DOLLAR FOR PRE-OWNED MOTORCYCLES, ATV'S, SIDE BY SIDES, AND WATERCRAFT!!!!!!!!!!UNIT DISCLAIMER* Price shown is net price after any factory to customer rebates and does not include Applicable taxes, documentation, destination and assembly fees. Used and adult Dirt bikes have NO freight or setup charges.
2017 HUSQVARNA FE501, 2017 HUSQVARNA FE 501We are a Credit Union Direct Lender offering many options for finance. Our vehicles are safety inspected and most qualify for extended service contracts. Our professional staff is here to help you with all your buying needs. Give us a call to set up an appointment or come into our showroom for more information. You can also visit our website at www.procaliberbend.com . COPY THE LINE BELOW INTO YOUR URL FOR FINANCING!!!https://s17965.endeavorsecure.com/financing.htmWE PAY TOP DOLLAR FOR PRE-OWNED MOTORCYCLES, ATV'S, SIDE BY SIDES, AND WATERCRAFT!!!!!!!!!!UNIT DISCLAIMER* Price shown is net price after any factory to customer rebates and does not include Applicable taxes, documentation, destination and assembly fees. Used and adult Dirt bikes have NO freight or setup charges.
2017 HUSQVARNA TX300, 2017 HUSQVARNA TX300We are a Credit Union Direct Lender offering many options for finance. Our vehicles are safety inspected and most qualify for extended service contracts. Our professional staff is here to help you with all your buying needs. Give us a call to set up an appointment or come into our showroom for more information. You can also visit our website at www.procaliberbend.com . COPY THE LINE BELOW INTO YOUR URL FOR FINANCING!!!https://s17965.endeavorsecure.com/financing.htmWE PAY TOP DOLLAR FOR PRE-OWNED MOTORCYCLES, ATV'S, SIDE BY SIDES, AND WATERCRAFT!!!!!!!!!!UNIT DISCLAIMER* Price shown is net price after any factory to customer rebates and does not include Applicable taxes, documentation, destination and assembly fees. Used and adult Dirt bikes have NO freight or setup charges.
High Tech Race WeaponAn exhilarating, high-revving power delivery and a lightweight and agile chassis, make the FC 250 a true contender in 250 4-stroke racing at all levels worldwide. The 14,000 rpm rev limit and peak power at well over 40 horsepower are benchmark performance figures. High quality standard equipment includes electric start, a hydraulic clutch, Brembo brakes and a handlebar-mounted map switch.
NEW NEW NEW 2016 Husqvarna 701 Enduro in stock now. MSRP $11299........... Now on sale $10399. No extra fees at Bill's. We do not charge freight, set-up or doc fees. Just the best deal we can do. 2016 701 "loaded models" in stock $11399 ( as pictured with luggage) 2017 701's IN STOCK $11799. Also have 2016 701 demo model on sale now $10399 w/ FMF exhaust.. Call Bill today! 1-888-806-1153. www. billshusky.comBill's Motorcycles Plus DM02801-503-585-11531122 12th St SE Salem OR 97302Mon-Fri 9-6Sat 9-5Sun CLOSED2016 Inventory 2016 FC250 MSRP $8499 -------------------- Now on sale $61992016 FC250 Rockstar Replica $8499 ------- Now on sale $63992016 FE350-S MSRP $10399 ---------------- Now on sale $93992016 701 Enduro MSRP $11299 ------------ Now on sale $10395DEMO BIKES2016 FC250 only 300 trail miles w/ Carbon fiber heat shield $59992016 TE250 BILLS BIKE only 500 miles with Cycra hand gaurds $72992016 701 Enduro only 250 miles with FMF Titanium exhaust $103992017 TC50 ----------- IN STOCK ------- MSRP $39952017 TC65 ----------- TAKING DEPOSITS ------ MSRP $49952017 TC85 14/17 ----- IN STOCK ---------- MSRP $55952017 TC85 16/19 ----- IN STOCK ---------- MSRP $57952017 TC125 ----------- IN STOCK ---------- MSRP $69952017 TC250 ---------- IN STOCK ---------- MSRP $77952017 FC250 ---------- IN STOCK ---------- MSRP $85992017 FC350 ---------- IN STOCK --------- MSRP $92992017 FC450 ----------- IN STOCK -------- MSRP $94992017 FE250 --------- IN STOCK NOW --------- MSRP $94952017 FE350 --------- IN STOCK NOW --------- MSRP $104952017 FE450 --------- IN STOCK NOW ------ MSRP $105952017 FE501 --------- IN STOCK NOW -------- MSRP $107952017 TE150 ---------- IN STOCK NOW ------ MSRP $79952017 TE250 ---------- IN STOCK NOW ----- MSRP $89952017 TE300 ---------- IN STOCK NOW ----- MSRP $91992017 TX300 ---------- TAKING DEPOSITS ---- MSRP $91952017 FX350 ---------- IN STOCK NOW ------- MSRP $99952017 FX450 ---------- IN STOCK NOW ----- MSRP $101952017 701 Enduro --------- IN STOCK NOW ------ MSRP $117952017 701 Supermoto ----- IN STOCK NOW --- MSRP $11795New bikes arriving weekly. Over 65+ Huskies in stock. Check out our great deals on remaining limited 2016 models www.bmpwholesale.com. Come see us or give us a call. NO EXTRA FEES AT BILL'S! www.billshusky.com
NEW NEW NEW 2017 Husqvarna TE300's in stock now. LIMITED QUANTITIES THIS YEAR. If you want one, come get one today. TE300's will be sold out for the year before we even get to spring riding season. MSRP $9199. No extra fees at Bill's. WE DO NOT CHARGE FREIGHT, SET-UP OR DOC FEES. We have a full line of accessories in stock for your new 2017 Husky as well. If you would like to fully equip your new TE300 with hand guards, spark arrester, skid pan, rad guards ETC call Bill now for pricing on a fully built bike out the door. Bill's Motorcycles Plus DM0280 1-503-585-11531122 12th St SE Salem OR 97302Mon-Fri 9-6Sat 9-5Sun CLOSED2017 TC50 ----------- IN STOCK ------- MSRP $39952017 TC65 ----------- TAKING DEPOSITS ------ MSRP $49952017 TC85 14/17 ----- IN STOCK ---------- MSRP $55952017 TC85 16/19 ----- IN STOCK ---------- MSRP $57952017 TC125 ----------- IN STOCK ---------- MSRP $69952017 TC250 ---------- IN STOCK ---------- MSRP $77952017 FC250 ---------- IN STOCK ---------- MSRP $85992017 FC350 ---------- IN STOCK --------- MSRP $92992017 FC450 ----------- IN STOCK -------- MSRP $94992017 FE250 --------- IN STOCK NOW --------- MSRP $94952017 FE350 --------- IN STOCK NOW --------- MSRP $104952017 FE450 --------- IN STOCK NOW ------ MSRP $105952017 FE501 --------- IN STOCK NOW -------- MSRP $107952017 TE150 ---------- IN STOCK NOW ------ MSRP $79952017 TE250 ---------- IN STOCK NOW ----- MSRP $89952017 TE300 ---------- IN STOCK NOW ----- MSRP $91992017 TX300 ---------- TAKING DEPOSITS ---- MSRP $91952017 FX350 ---------- IN STOCK NOW ------- MSRP $99952017 FX450 ---------- IN STOCK NOW ----- MSRP $101952017 701 Enduro --------- IN STOCK NOW ------ MSRP $117952017 701 Supermoto ----- IN STOCK NOW --- MSRP $11795New bikes arriving weekly. Over 65+ Huskies in stock. Check out our great deals on remaining limited 2016 models . Come see us or give us a call. NO EXTRA FEES AT BILL'S!
The TC 65 will be the first time many young riders experience a full race bike featuring a manual clutch and gearbox. This transition is made easy with a hydraulic clutch and precise 6-speed gearbox. The TC 65 features the same level of quality found on the larger motocross range with premium components fitted as standard.
2017 HUSQVARNA FX350, We are a Credit Union Direct Lender offering many options for finance. Our vehicles are safety inspected and most qualify for extended service contracts. Our professional staff is here to help you with all your buying needs. Give us a call to set up an appointment or come into our showroom for more information. You can also visit our website at . COPY THE LINE BELOW INTO YOUR URL FOR FINANCING!!! s:// /financing.htmWE PAY TOP DOLLAR FOR PRE-OWNED MOTORCYCLES, ATV'S, SIDE BY SIDES, AND WATERCRAFT!!!!!!!!!!UNIT DISCLAIMER* Price shown is net price after any factory to customer rebates and does not include Applicable taxes, documentation, destination and assembly fees. Used and adult Dirt bikes have NO freight or setup charges.
Street legal 2007 Husqvarna TE 450. Has about 6,000 miles on it. Lots of upgrades like rekluse clutch, bigger tank, heated grips, skid plate, list goes on. Super fun and versatile bike. I ride both on the street and in the dirt, this bike has never let me down. Looking for $4,500 OBO. Bike is in Oregon.
2015 Husqvarna FC 250, Electric start..hydraulic clutch , fuel injection 2015 Husqvarna® FC 250 HIGH TECH RACE WEAPON An exhilarating, high-revving power delivery and a lightweight and agile chassis, make the FC 250 a true contender in 250 4-stroke racing at all levels worldwide. The 14,000 RPM rev limit and peak power at well over 40 horsepower are benchmark performance figures. High quality standard equipment includes electric start, a hydraulic clutch, Brembo brakes and a handlebar-mounted map switch. Features May Include: ENGINE MANAGEMENT SYSTEMThe electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power.ENGINETechnologically advanced solutions in engine layout and components ensure explosive engine performance. The lightweight and compact DOHC 4-stroke engine has been designed to offer top performance without compromise. The large titanium valves (32.5mm intake and 26.5mm exhaust) weigh only 19.6g each on the intake side and 18g on the exhaust side.CRANKSHAFT, CONROD AND PISTONThe high revving 250cc engine demands high-tech and reliable engine components. The crankshaft features a plain big end bearing and force-fitted bearing shells, ensuring durability and long service intervals. The conrod and crankshaft are produced by industry leader Pankl to exacting standards. The piston is produced by König and has been designed for minimum weight to suit the high-revving, high output nature of the FC 250. The forged box-type piston weighs only 200g and combines high performance and reliability, and guarantees a compression ratio of 13.9:1 for maximum power output.FRAMEThe engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal feedback and complete confidence in every situation. This was achieved by designing the lightweight chromium molybdenum frame with precise longitudinal flex that helps absorb impacts from the rear wheel, working together with the suspension for better comfort and greater feedback. The torsional rigidity enhances turn-in, sharp handling and stability even on the roughest terrain, giving the rider complete confidence in finding his lines and increasing his pace lap after lap.SUBFRAMEThe lightweight polyamide rear subframe has been reinforced with an additional screw on the airbox side that improves the fitment between the left subframe arm and the airbox. The improved seal guarantees better performance and durability. The three-piece composite subf
2017 Husqvarna FE 350, Price, may not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected. 2017 Husqvarna® FE 350 ENDURO PROGRESSION The perfect balance between power, weight and ease-of-use! The epitomy of versatility, the FE 350's engine has delivery and throttle response similar to a FE 250, but with broad tractable 450 rivalling performance. For 2017, the engine weighs 0.7 kg less than the old design and is also 20 mm shorter. With improved performance, mass centralisation and weight reduction, ride-ability has progressed to new levels. The FE 350 features a new six-speed gearbox with specific wide-range enduro type gearing. A low-friction shifter fork coating assists with shifting precision, while a new gear sensor allows the engine management system (EMS) to select a specific engine map for each gear. The smart new gear-lever design prevents dirt build-up, springing back into position for perfect control. Features may include: 42 mm throttle bodyThe FE 350 features an all-new 42 mm Keihin throttle body. The injector position is revised and placed to ensure the most efficient flow of fuel into the combustion chamber. Additionally, the throttle cable is mounted directly without a throttle linkage providing more immediate throttle response and feeling while also saving 100g.Engine management systemThe Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. Together with the Keihin throttle body, the system provides quick and reliable data calculation ensuring the best performance is delivered in every condition.Gear position sensorThe FE 350 features a new 6-speed gearbox with specific wide-range enduro type gearing. The shifting fork now employs a special low friction coating to ensure smooth and precise shifting. A new gear sensor allows the EMS to deliver the optimal power delivery by selecting a specific engine map tailored for each gear.Electric starterA standard electric starter guarantees easy starting. The FE 350 is fitted with a new starter motor made by Mitsuba and is combined with a new Li-Ion battery saving 1 kg over the previous conventional battery.Chromoly steel frameWhile keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new frame weighs only 8.
2017 Husqvarna 701 Enduro, Price, may not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected. 2017 Husqvarna® 701 Enduro THE PERFECT COMBINATION With the ability to conquer urban environments and treacherous off-road terrain with equal composure, the 701 ENDURO reaches the next level of versatility. Bred from decades of enduro world championship-winning pedigree and mixed with over a century of motorcycle expertise, the 701 ENDURO combines high performance with typical Swedish functionality in a stylish and modern design. Features may include: FrameThe lightweight trellis frame is made of high-grade chromium-molybdenum steel and developed to ensure precise handling and instil complete confidence in the rider. Detailed feedback is transmitted to the rider thanks to precisely calculated torsional rigidity and longitudinal flex.Polyamide rear subframe and tankThe self-supporting rear subframe with integrated 13 litre fuel tank is perfectly positioned for the best possible weight distribution. Produced in a thermoplastic rotational moulding process, the single-piece construction weighs only 5.2 kg and is made of high-strength polyamide.Aluminium swingarmMaximum precision and an extremely low weight of only 3.9 kg are guaranteed by eliminating welding in the single-component construction of the aluminium gravity die-cast swingarm.WP suspension (front)WP Performance Systems has developed a closed cartridge 4CS fork specifically for the 701 ENDURO. The four chamber fork has advanced damping characteristics and is also lighter than a conventional upside-down fork. As with all 4CS forks by WP, the clicker settings can be easily and quickly adjusted via the dials on the top of the fork tubes.WP suspension (rear)The high performance rear shock absorber made by WP Performance Systems is completely adjustable for compression and rebound. Connected to a linkage system with offroad geometry and 275 mm of rear wheel travel, the system ensures unbeatable all-terrain capability.EngineThe single overhead camshaft, liquid cooled, single cylinder engine features the latest in design and electronic technology. An outstanding maximum power output of 55 kW (74 hp) at 8,000 rpm and torque of 71 Nm at 6,750 rpm leave the rider in no doubt of the performance packed inside this lightweight unit.Cylinder headThe compact design of the single overhead camshaft, 4-valve cylinder head features 42 mm intake valves and 34 mm exhaust valves actuated by a robust rocker arm system which delivers precise valve timing at high engine speeds. As a result, the peak RPM is increased to 9000 rpm. Ignit
2017 Husqvarna FE 450, Price, may not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected. 2017 Husqvarna® FE 450 BOUNDLESS POWER Not that it was necessary at all, but the 2017 model has increased performance over the previous engine, with a broader spread and more torque. It is also a lot lighter and more compact. Making sense of all of that mighty power, the 2017 FE models boast an optimised new map-switch, which also activates Traction Control. Starting a bike in the most difficult positions is part of enduro riding and is why all FE and TE models come standard with an electric starter. For 2017 the bikes are fitted with a compact Li-Ion battery, 1 kg lighter than conventional batteries. The wiring harness is designed so that the rear sub-frame can be removed without removing any wiring. Class-leading BREMBO brakes control the 2017 line-up. Features may include: Tool-less air filter accessThe new airbox is designed with precisely positioned inlet ducts aimed at preventing air deformation and ensuring maximum airflow and filter protection. The air filter is easily accessed, without tools, by removing the left side panel. Easy maintenance is guaranteed by the Twin Air filter and filter cage design that features a simple fail proof mounting system for safe and accurate filter installation.CNC machined triple clampsThe 22 mm offset black-anodised CNC machined triple clamps offer premium quality and style standard on all Husqvarna enduro models. The triple clamps are been expertly crafted using superior techniques and materials to provide high levels of quality and reliability. A 2-way handlebar adjustment is standard and allows for customisable ergonomics.Functional bodyworkDistinctive and futuristic bodywork highlight the impressive leap forward for MY17, while striking pearl blue and electric yellow colours and graphics stylishly adorn the Swedish inspired design. With completely new ergonomics, rider control and comfort are improved allowing the rider to perform at the peak for longer periods of time. The seat has a low profile design with a new high grip seat cover which keeps the rider planted under hard acceleration and in slippery conditions.Electric startStandard electric start ensures effortless and reliable starting that is especially useful in difficult terrain. The system is now coupled with a new Li-Ion battery saving 1 kg over the previous model.Chromoly steel frameWhile keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity whil
2017 Husqvarna FE 250, Price, may not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected. 2017 Husqvarna® FE 250 TOTAL ENDURO PRECISION The lightest, most compact Husqvarna 4-stroke enduro bike. Smooth 4-stroke torque and power in a much lighter and more compact chassis. A new precision-built frame offers improved agility, better bump absorption and optimum suspension functionality while only weighing 8.8 kg. New laterally-mounted head-stays increase handling agility and reduce vibration. All 2017 4-stroke models have new header pipes and shorter mufflers for maximum performance within the FIM noise limits. Enduro riders face some of the toughest conditions, always looking for positive traction to drive the bike forward. The 2017 range of 4-strokes have an optimised map-switch, which also activates the Traction Control feature. Features may include: WP Xplor 48The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up.WP rear shockThe WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption.Brembo brakesClass-leading Brembo callipers and controls with high quality GSK discs deliver superior stopping power instilling confidence in all situations. For MY17, the rear brake calliper uses a smaller piston diameter 24mm instead of 26mm, coupled with a 10mm longer rear brake lever the system delivers improved modulation and feeling.ODI lock on gripsThe ODI lock-on grip on the left side does not require gluing, while on the right, the vulcanised grip features an integrated throttle mechanism. The assembly has easy free-play adjustment and, by changing a cam, throttle progression can be altered.EngineThe new 250cc engine is re-designed to be more powerful, lighter and more compact. All major compon
