Husqvarna 350 motorcycles for sale

1-15 of 684

Sort By

2017 Husqvarna FC 350

2017 Husqvarna FC 350

$9,299

Woodstock, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category Dirt Bikes

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, This 2017 Husqvarna FC 350 FC 350 features a 350cc cyl engine. The vehicle is Other with a Other interior. It is offered As-Is, extended warranty is available. - 2017 HUSQVARNA FC 350 - This Husqvarna is in Excellent overall exterior condition - ABS, 2017 Husqvarnar FC 350POWER AND CONTROLThe FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, high performance package.Features may include:EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13, 400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.Functional bodyworkModern and functional bodywork with traditional Husqvarna blue and yellow accents mark a simplistic yet stylish Swedish design. The ergonomics have been specifically tailored to deliver high levels of comfort and control, ergonomics and packaging. With carefully calculated tortional and longitudinal flex, the frame works in harmony with the suspension to offer sharp handling and superior comfort. These characteristics, matched to a lightweight and compact engine design, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is 30% carbon fibre and the overall 3-piece construction is remarkably light but also very strong for an overall weight of 1.4 kg. Additionally, a specific rigidity has been calculated in the component for optimal handling and rider ergonomics.SwingarmThe hollow, cast aluminium swingarm is designed to offer optimal stiffness and reliability. The machining on the side by Husqvarna Motorcycle engineers is another

2017 Husqvarna FC 350

2017 Husqvarna FC 350

$9,299

Woodstock, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, This 2017 Husqvarna FC 350 FC 350 features a 350cc cyl engine. The vehicle is Other with a Other interior. It is offered As-Is, extended warranty is available. - 2017 HUSQVARNA FC 350 - This Husqvarna is in Excellent overall exterior condition - ABS, 2017 Husqvarnar FC 350POWER AND CONTROLThe FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, high performance package.Features may include:EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13, 400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.Functional bodyworkModern and functional bodywork with traditional Husqvarna blue and yellow accents mark a simplistic yet stylish Swedish design. The ergonomics have been specifically tailored to deliver high levels of comfort and control, ergonomics and packaging. With carefully calculated tortional and longitudinal flex, the frame works in harmony with the suspension to offer sharp handling and superior comfort. These characteristics, matched to a lightweight and compact engine design, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is 30% carbon fibre and the overall 3-piece construction is remarkably light but also very strong for an overall weight of 1.4 kg. Additionally, a specific rigidity has been calculated in the component for optimal handling and rider ergonomics.SwingarmThe hollow, cast aluminium swingarm is designed to offer optimal stiffness and reliability. The machining on the side by Husqvarna Motorcycle engineers is another

2017 Husqvarna FX 350

2017 Husqvarna FX 350

Request Price

Paramount, California

Year 2017

Make Husqvarna

Model FX 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FX 350, 2017 Husqvarna® FX 350 UNMATCHED VERSATILITY The FX 350 shares much of its engine and chassis architecture with the motocross FC 350, but is tailored for closed course off-road usage. With a maximum output of 58 hp, the FX 350 has a 450 rivalling power-to-weight ratio while retaining the light, agile handling of 250-class machines. This is matched with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Include a larger 6-speed transmission, large fuel capacity and an 18-inch rear wheel and the FX 350 is one of the most advanced off-road machines created by Husqvarna Motorcycles. Features may include: Chromoly steel frameThe hydro-formed, laser-cut and robot-welded frame expertly crafted by WP Performance Systems is specifically designed with calculated parameters of longitudinal and torsional flex. Aluminum engine mountings benefit suspension functionality and feeling while retaining a light, compact and strong package. The frame is finished off with a premium white powder coating and standard frame protectors guaranteeing supreme protection and durability.Composite carbon fibre subframeThe composite subframe is a design unique to Husqvarna showcasing pioneering technologies and innovation. This 3 piece component is made up of 30% carbon fiber making it remarkably light (3.1 lbs.) and also particularly strong. Specific care has been taken to create a certain rigidity for optimal handling and rider ergonomics.Aluminium swingarmThe hollow, cast aluminum swingarm is designed to offer optimal stiffness and reliability at the least possible weight. The machining on the side by Husqvarna motorcycle engineers is another mark of quality showcasing in depth attention to detail and superior craftsmanship.Self cleaning footpeg mountThe Husqvarna frame features an innovative, self -cleaning footpeg mount which prevents the build-up of dirt collected through deep ruts or muddy terrain. As a result, the footpeg will spring back into its original position even in the toughest conditions. For riders who prefer a higher footpeg set-up, the MY17 enduro footpegs can be fitted raising the position by 6mm.WP AER 48The 48 mm split air fork features an insulated air spring and pressurized oil chamber for progressive and consistent damping. The new component is lightweight and easily adjustable via a single air pressure valve for pre-load (on the left leg) as well as easy access clickers adjusting damping with 30 clicks (on the right leg). Additionally, the air pump needed to adjust air pressure in the fork will be provided as standard.WP rear shockThe WP DCC rear shock is designed to provide advanced damping characteristics while conforming to a compact an

2016 Husqvarna FE 350 S

2016 Husqvarna FE 350 S

$10,399

Wantage, NJ

Year 2016

Make Husqvarna

Model FE 350 S

Category -

Engine -

Posted Over 1 Month

Price shown is based on the manufacturer's suggested retail price (MSRP) and is subject to change. MSRP excludes destination charges, optional accessories, applicable taxes, installation, setup and/or other dealer fees.

2016 Husqvarna FE 350

2016 Husqvarna FE 350

$9,899

Wantage, NJ

Year 2016

Make Husqvarna

Model FE 350

Category -

Engine -

Posted Over 1 Month

Price shown is based on the manufacturer's suggested retail price (MSRP) and is subject to change. MSRP excludes destination charges, optional accessories, applicable taxes, installation, setup and/or other dealer fees.

2016 Husqvarna FC 350

2016 Husqvarna FC 350

$9,199

Wantage, NJ

Year 2016

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

The FC 350 shares much of its engine architecture with the smaller FC 250, therefore combining compact dimensions, light weight and 450-rivalling power. All the packaging benefits of the new DOHC engine are matched to the most advanced electronics. Standard launch control, switchable engine maps and a faster, more powerful engine management system, guarantee that all the 58 horsepower is put to the ground in total control.

2017 Husqvarna FE 350

2017 Husqvarna FE 350

$10,499

Escondido, California

Year 2017

Make Husqvarna

Model FE 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FE 350, 2017 Husqvarna® FE 350 ENDURO PROGRESSION The perfect balance between power, weight and ease-of-use! The epitomy of versatility, the FE 350's engine has delivery and throttle response similar to a FE 250, but with broad tractable 450 rivalling performance. For 2017, the engine weighs 0.7 kg less than the old design and is also 20 mm shorter. With improved performance, mass centralisation and weight reduction, ride-ability has progressed to new levels. The FE 350 features a new six-speed gearbox with specific wide-range enduro type gearing. A low-friction shifter fork coating assists with shifting precision, while a new gear sensor allows the engine management system (EMS) to select a specific engine map for each gear. The smart new gear-lever design prevents dirt build-up, springing back into position for perfect control. Features may include: 42 mm throttle bodyThe FE 350 features an all-new 42 mm Keihin throttle body. The injector position is revised and placed to ensure the most efficient flow of fuel into the combustion chamber. Additionally, the throttle cable is mounted directly without a throttle linkage providing more immediate throttle response and feeling while also saving 100g.Engine management systemThe Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. Together with the Keihin throttle body, the system provides quick and reliable data calculation ensuring the best performance is delivered in every condition.Gear position sensorThe FE 350 features a new 6-speed gearbox with specific wide-range enduro type gearing. The shifting fork now employs a special low friction coating to ensure smooth and precise shifting. A new gear sensor allows the EMS to deliver the optimal power delivery by selecting a specific engine map tailored for each gear.Electric starterA standard electric starter guarantees easy starting. The FE 350 is fitted with a new starter motor made by Mitsuba and is combined with a new Li-Ion battery saving 1 kg over the previous conventional battery.Chromoly steel frameWhile keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new frame weighs only 8.8 kg making it 0.6 kg lighter than its predecessor.Composite carbon fibre subframeThe composite subframe is a design unique to Husqvarna motorcycles showcasing pioneering technology and innovation. This 3 piece component

2016 Husqvarna FE 350 S

2016 Husqvarna FE 350 S

$9,999

Escondido, California

Year 2016

Make Husqvarna

Model FE 350 S

Category -

Engine -

Posted Over 1 Month

2016 Husqvarna FE 350 S, 2016 Husqvarna® FE 350 S TOP PERFORMANCE, LESS EFFORT With the introduction of the street legal variant of the FE 350, Husqvarna provides the freedom of everyday-riding for one of the most versatile Enduro bikes on the market. The FE 350 shares its engine architecture with the FE 250, but with 25% more power. The combination of 450-rivalling power and 250 size and weight means top performance with less effort. The precise 6-speed gearbox is mated to a new Brembo hydraulic clutch for smooth shifting, while the Brembo calipers and new disc brakes guarantee superior stopping power and maximum feeling. Features May Include: ENGINEStrong torque is delivered across an extremely wide rev range in a smooth and effortless surge all the way to the 12,000 rpm rev limit. Peak power of 46hp from the 350cc, 28.5kg engine puts the FE 350 on the same level as bigger 450cc competitors. The 57.5 mm stroke and 88mm bore allow for large diameter valves. The 36.3mm titanium intake and 29.1mm exhaust valves weigh only 22.4g and 22.7g each respectively, and are operated by DLC coated finger followers. The cam timing and overall performance are tuned for enduro-style riding.COUNTER BALANCE SHAFTOn the 4-stroke engines, vibrations are kept to a minimum thanks to a multifunctional counter balance shaft that cancels inertia forces and contributes to the compact layout of the engines. It also drives the water pump and timing chain and contributes to the compact engine design.CRANKSHAFTClass-leading performance, matched with incredible reliability, is achieved thanks to the most advanced crankshaft and conrod technology. All the 4-stroke engines feature crankshafts and conrods produced by industry leader Pankl, ensuring by far the best durability and longest service intervals in the competition enduro segment (135 hours before major engine rebuilds). The plain big end bearing and the force-fitted bearing shells ensure that high performance and durability can be combined.COOLING SYSTEMWP Performance Systems radiators feature integrated routing into the frame. This system dissipates heat efficiently and guarantees optimal cooling and fitting thanks to reduced tubing.CHROMOLY STEEL FRAMEHigh-strength steel of the highest quality is laser cut and robot welded to exacting standards by WP Performance Systems, according to precise torsional rigidity, longitudinal flex and weight defined by our R&D department. Finely-tuned torsional rigidity provides sharp handling and stability, while calculated longitudinal flex helps absorb impacts from the terrain, working together with the suspension for better comfort and greater feedback. The lightweight design allows riders to confidently pick faster lines while maintaining race-winning pace over extended periods of time.POLYAMIDE REAR SUBFRAMEThe lightweight, three-piece poly

2017 Husqvarna FX 350

2017 Husqvarna FX 350

Request Price

Colorado Springs, Colorado

Year 2017

Make Husqvarna

Model FX 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FX 350, PUEBLO LOCATION 2017 Husqvarna® FX 350 UNMATCHED VERSATILITY The FX 350 shares much of its engine and chassis architecture with the motocross FC 350, but is tailored for closed course off-road usage. With a maximum output of 58 hp, the FX 350 has a 450 rivalling power-to-weight ratio while retaining the light, agile handling of 250-class machines. This is matched with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Include a larger 6-speed transmission, large fuel capacity and an 18-inch rear wheel and the FX 350 is one of the most advanced off-road machines created by Husqvarna Motorcycles. Features may include: Chromoly steel frameThe hydro-formed, laser-cut and robot-welded frame expertly crafted by WP Performance Systems is specifically designed with calculated parameters of longitudinal and torsional flex. Aluminum engine mountings benefit suspension functionality and feeling while retaining a light, compact and strong package. The frame is finished off with a premium white powder coating and standard frame protectors guaranteeing supreme protection and durability.Composite carbon fibre subframeThe composite subframe is a design unique to Husqvarna showcasing pioneering technologies and innovation. This 3 piece component is made up of 30% carbon fiber making it remarkably light (3.1 lbs.) and also particularly strong. Specific care has been taken to create a certain rigidity for optimal handling and rider ergonomics.Aluminium swingarmThe hollow, cast aluminum swingarm is designed to offer optimal stiffness and reliability at the least possible weight. The machining on the side by Husqvarna motorcycle engineers is another mark of quality showcasing in depth attention to detail and superior craftsmanship.Self cleaning footpeg mountThe Husqvarna frame features an innovative, self -cleaning footpeg mount which prevents the build-up of dirt collected through deep ruts or muddy terrain. As a result, the footpeg will spring back into its original position even in the toughest conditions. For riders who prefer a higher footpeg set-up, the MY17 enduro footpegs can be fitted raising the position by 6mm.WP AER 48The 48 mm split air fork features an insulated air spring and pressurized oil chamber for progressive and consistent damping. The new component is lightweight and easily adjustable via a single air pressure valve for pre-load (on the left leg) as well as easy access clickers adjusting damping with 30 clicks (on the right leg). Additionally, the air pump needed to adjust air pressure in the fork will be provided as standard.WP rear shockThe WP DCC rear shock is designed to provide advanced damping characteristics whi

2017 Husqvarna FC 350

2017 Husqvarna FC 350

$9,299

Evansville, Indiana

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.New map switchThe FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction.Engine management systemThe Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear.44 mm throttle bodyThe FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle respon

2017 Husqvarna FC350

2017 Husqvarna FC350

$9,299

Waynesboro, Virginia

Year 2017

Make Husqvarna

Model FC350

Category -

Engine -

Posted Over 1 Month

2017 HUSQVARNA FC350,

2015 Husqvarna FC 350

2015 Husqvarna FC 350

$7,200

Cold Spring, Minnesota

Year 2015

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

Only ONE ride. Bought brand new last fall but decided at 62 to get a dual sport Husky. Stored properly and ready to ride. Fantastic bike! More power than a 250, but lighter than a 450. I have tool kit and clean title in hand. Call or text only. six61644817five. No Trades. Cash only. Located near St. Cloud.  Thanks for looking.

2017 Husqvarna FX350

2017 Husqvarna FX350

$9,999

Waynesboro, Virginia

Year 2017

Make Husqvarna

Model FX350

Category -

Engine -

Posted Over 1 Month

2017 HUSQVARNA FX350,

2017 Husqvarna FE350

2017 Husqvarna FE350

$10,499

Waynesboro, Virginia

Year 2017

Make Husqvarna

Model FE350

Category -

Engine -

Posted Over 1 Month

2017 HUSQVARNA FE350,

2015 Husqvarna 350

2015 Husqvarna 350

$8,300

Riverside, California

Year 2015

Make Husqvarna

Model 350

Category -

Engine -

Posted Over 1 Month

Husqvarna fe350s only 450 milesRiverside/Coronafirst service done