Husqvarna 350 motorcycles for sale in Illinois

2017 Husqvarna FE 350

$5,499

Springfield, Illinois

Year 2015

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FC 350, Only 17 Hours! 2015 Husqvarna® FC 350 BALANCE AND PRECISION With top-level performance guaranteed by the lightweight agility of a 250 and the hard-hitting power of a 450, the FC 350 carves through turns effortlessly and powers down straights aggressively. Standard equipment such as the electric start system and the handlebar-mounted map switch highlight the FC 350 s technological edge over the competition. Features May Include: ENGINE With peak power of 54 horsepower in a package of roughly the same dimensions as the FC 250 engine, the FC 350 offers 450-class performance with 250-class size. Superb engineering and manufacturing expertise combine to make the impressive engine that powers the FC 350 to the top of the power output charts. The titanium valves are ultra-lightweight, weighing only 22.4g and have a diameter of 36.3mm each on the intake side, and 22.7g with a diameter of 29.1mm on the exhaust side. Combined with the Diamond Like Carbon (DLC) coated followers, the FC 350 engine is capable of reaching a 13,000 rpm ceiling. The yellow valve cover tops-off a technological marvel. The handlebar mounted map switch is a standard feature and allows the rider to switch between maps while riding, adjusting power delivery and engine performance according to rider fatigue and track conditions. ENGINE MANAGEMENT SYSTEM The electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power. Great attention was dedicated to ensuring that cleaning and washing the bike will not damage the electronics. The wire harness, lead wire, and high quality sealed critical connectors ensure that a jet wash poses no threat. The throttle position sensor (TPS) is also water resistant and protected. CRANKSHAFT, CONROD AND PISTON The plain big end bearing and two force-fitted shells that run directly on the crank pin are lubricated by the engine s pressure lubrication in order to maintain durability and long service intervals (100 hours before changing con rod, con rod bearing and crank pin). The FC 350 s power output and engine characteristics require the highest quality components, therefore the entire crankshaft, together with the con rod, is produced by industry leader Pankl. The CP-Carrillo forged box-type piston combines maximum performance and reliability with minimum weight, only 270g. The compression ratio is 13.65:1. FRAME The engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal fee

2015 Husqvarna FC 350

$5,499

Springfield, Illinois

Year 2015

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FC 350, Only 17 Hours! 2015 Husqvarna® FC 350 BALANCE AND PRECISION With top-level performance guaranteed by the lightweight agility of a 250 and the hard-hitting power of a 450, the FC 350 carves through turns effortlessly and powers down straights aggressively. Standard equipment such as the electric start system and the handlebar-mounted map switch highlight the FC 350 s technological edge over the competition. Features May Include: ENGINE With peak power of 54 horsepower in a package of roughly the same dimensions as the FC 250 engine, the FC 350 offers 450-class performance with 250-class size. Superb engineering and manufacturing expertise combine to make the impressive engine that powers the FC 350 to the top of the power output charts. The titanium valves are ultra-lightweight, weighing only 22.4g and have a diameter of 36.3mm each on the intake side, and 22.7g with a diameter of 29.1mm on the exhaust side. Combined with the Diamond Like Carbon (DLC) coated followers, the FC 350 engine is capable of reaching a 13,000 rpm ceiling. The yellow valve cover tops-off a technological marvel. The handlebar mounted map switch is a standard feature and allows the rider to switch between maps while riding, adjusting power delivery and engine performance according to rider fatigue and track conditions. ENGINE MANAGEMENT SYSTEM The electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power. Great attention was dedicated to ensuring that cleaning and washing the bike will not damage the electronics. The wire harness, lead wire, and high quality sealed critical connectors ensure that a jet wash poses no threat. The throttle position sensor (TPS) is also water resistant and protected. CRANKSHAFT, CONROD AND PISTON The plain big end bearing and two force-fitted shells that run directly on the crank pin are lubricated by the engine s pressure lubrication in order to maintain durability and long service intervals (100 hours before changing con rod, con rod bearing and crank pin). The FC 350 s power output and engine characteristics require the highest quality components, therefore the entire crankshaft, together with the con rod, is produced by industry leader Pankl. The CP-Carrillo forged box-type piston combines maximum performance and reliability with minimum weight, only 270g. The compression ratio is 13.65:1. FRAME The engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal fee

2017 Husqvarna FE 501

$10,499

Springfield, Illinois

Year 2017

Make Husqvarna

Model FE 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FE 350, We are now accepting preorder deposits. Preorder now and reserve one before they gone! 2017 Husqvarna® FE 350 ENDURO PROGRESSION The perfect balance between power, weight and ease-of-use! The epitomy of versatility, the FE 350's engine has delivery and throttle response similar to a FE 250, but with broad tractable 450 rivalling performance. For 2017, the engine weighs 0.7 kg less than the old design and is also 20 mm shorter. With improved performance, mass centralisation and weight reduction, ride-ability has progressed to new levels. The FE 350 features a new six-speed gearbox with specific wide-range enduro type gearing. A low-friction shifter fork coating assists with shifting precision, while a new gear sensor allows the engine management system (EMS) to select a specific engine map for each gear. The smart new gear-lever design prevents dirt build-up, springing back into position for perfect control. Features may include: 42 mm throttle body The FE 350 features an all-new 42 mm Keihin throttle body. The injector position is revised and placed to ensure the most efficient flow of fuel into the combustion chamber. Additionally, the throttle cable is mounted directly without a throttle linkage providing more immediate throttle response and feeling while also saving 100g. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. Together with the Keihin throttle body, the system provides quick and reliable data calculation ensuring the best performance is delivered in every condition. Gear position sensor The FE 350 features a new 6-speed gearbox with specific wide-range enduro type gearing. The shifting fork now employs a special low friction coating to ensure smooth and precise shifting. A new gear sensor allows the EMS to deliver the optimal power delivery by selecting a specific engine map tailored for each gear. Electric starter A standard electric starter guarantees easy starting. The FE 350 is fitted with a new starter motor made by Mitsuba and is combined with a new Li-Ion battery saving 1 kg over the previous conventional battery. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new frame weighs only 8.8 kg making it 0.6 kg lighter than its predecessor. Composite carbon fibre subframe The composite subframe is a design uni

2017 Husqvarna FE 350

$10,499

Springfield, Illinois

Year 2017

Make Husqvarna

Model FE 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FE 350, We are now accepting preorder deposits. Preorder now and reserve one before they gone! 2017 Husqvarna® FE 350 ENDURO PROGRESSION The perfect balance between power, weight and ease-of-use! The epitomy of versatility, the FE 350's engine has delivery and throttle response similar to a FE 250, but with broad tractable 450 rivalling performance. For 2017, the engine weighs 0.7 kg less than the old design and is also 20 mm shorter. With improved performance, mass centralisation and weight reduction, ride-ability has progressed to new levels. The FE 350 features a new six-speed gearbox with specific wide-range enduro type gearing. A low-friction shifter fork coating assists with shifting precision, while a new gear sensor allows the engine management system (EMS) to select a specific engine map for each gear. The smart new gear-lever design prevents dirt build-up, springing back into position for perfect control. Features may include: 42 mm throttle body The FE 350 features an all-new 42 mm Keihin throttle body. The injector position is revised and placed to ensure the most efficient flow of fuel into the combustion chamber. Additionally, the throttle cable is mounted directly without a throttle linkage providing more immediate throttle response and feeling while also saving 100g. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. Together with the Keihin throttle body, the system provides quick and reliable data calculation ensuring the best performance is delivered in every condition. Gear position sensor The FE 350 features a new 6-speed gearbox with specific wide-range enduro type gearing. The shifting fork now employs a special low friction coating to ensure smooth and precise shifting. A new gear sensor allows the EMS to deliver the optimal power delivery by selecting a specific engine map tailored for each gear. Electric starter A standard electric starter guarantees easy starting. The FE 350 is fitted with a new starter motor made by Mitsuba and is combined with a new Li-Ion battery saving 1 kg over the previous conventional battery. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new frame weighs only 8.8 kg making it 0.6 kg lighter than its predecessor. Composite carbon fibre subframe The composite subframe is a design uni

2015 Husqvarna FE 350 S

$7,495

Countryside, Illinois

Year 2015

Make Husqvarna

Model FE 350 S

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FE 350 S, Most capable dual sport bike at a great price. Street legal and can go anywhere. 2015 Husqvarna FE 350 S COMPETITION-LEVEL PERFORMANCE, EVERYDAY VERSATILITY With the introduction of the street legal variant of the FE 350, Husqvarna provides the freedom of everyday-riding for one of the most versatile enduro bikes on the market. With the power to rival the 450 competition and the lightweight agility of a 250, the FE 350 S is in the enviable position of having the best of both worlds. Thanks to the compact yet powerful engine, a stable and confidence inspiring chassis, a reliable and efficient electric starting system, top-of-the line standard equipment and cutting-edge technology, the FE 350 S allows riders to tackle the most difficult terrain with increased confidence and less effort. Features May Include: ENGINE The power output of the FE 350 S is more than enough to put it level with the E2 competition, while being similar in size and weight to the FE 250 engine (only 28.5 kg). The 350cc engine s smooth and easy to handle power delivery from low-down through to the 12,000 rpm limit, combined with an advanced engine management system and a slick 6-speed gearbox, ensure every rider can take full advantage of the FE 350 S s exceptional performance. ENGINE MANAGEMENT SYSTEM (EMS) The FE 350 S s engine features a Keihin electronic fuel injection and 42mm throttle body for great throttle response and engine performance that is optimised for tough Enduro riding conditions. STARTER The entire 4-stroke Enduro range features a reliable electric starter and offer the possibility to retro-fit a kick-starter. Easy starting in any situation. FRAME Enduro riding requires maximum feedback from the bike in rough terrain, on rocks and in slippery conditions. Precisely engineered flex in the frame can greatly improve rider confidence, allowing for increased speed and improved times. To achieve these goals, the engineers designed the lightweight chromium molybdenum frame with precise longitudinal flex that helps absorb impacts from the rear wheel, working together with the suspension and giving the rider greater feedback. SUBFRAME The lightweight, three-piece polyamide rear subframe has been reinforced with an additional screw on the airbox side that improves the fitment between the left subframe arm and the airbox.. WHEELS AND BRAKES Black DID rims and CNC machined hubs mated to silver anodised nipples add an aggressive and modern look to the newly designed Husqvarna Enduro range. World Championship level performance is guaranteed by Michelin Enduro Competition tyres. The wheels are kept firmly under control thanks to maximum feeling in extreme situations combined with amazing stopping power of the latest generation of Brembo brakes.

2015 Husqvarna FE 350

$7,199

Springfield, Illinois

Year 2015

Make Husqvarna

Model FE 350

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FE 350, This motorcycle is being sold on consignment and is NOT located at Hall's Cycles. It is located in Jonesboro, Arkansas. Owner will deliver to Hall's Cycles if need be. Contact Nelson @ 870-926-2953 2015 Husqvarna® FE 350 MIND BLOWING PACE AT HALF THE EFFORT With the power to rival the 450 competition and the lightweight agility of a 250, the FE 350 is in the enviable position of having the best of both worlds. The ideal combination of maximum performance and light and agile handling allows riders to tackle the most difficult terrain with increased confidence and less effort. Thanks to the compact yet powerful engine, a stable and confidence inspiring chassis, a reliable and efficient electric starting system, top-of-the line standard equipment and cutting-edge technology, the FE 350 conquers hearts, minds and podium finishes. Features May Include: ENGINE he FE 350 s engine weighs only 28.5 kg and is similar in size to the FE 250 s, but has a maximum power output in excess of 45 hp that easily puts it on the same level as the bigger 450cc competition. The smooth and easy to handle power delivery is strong from low-down all the way through to the 12,000 rpm limit. The 57.5 mm stroke and 88mm bore allow for large diameter valves. The 36.3mm titanium intake and 29.1mm exhaust valves weigh only 22.4g and 22.7g each respectively, and are operated by DLC coated finger followers. The cam timing and overall performance are tuned for Enduro style riding. CRANK SHAFT The performance demands of highly tuned engines require the most advanced crankshaft technology to maintain high performance characteristics throughout the life of the engines. ENGINE MANAGEMENT SYSTEM (EMS) The 4-stroke engines feature a Keihin electronic fuel injection and 42mm throttle body for accurate throttle response and smooth engine performance that is ideal for Enduro-style riding. Optional Husky Power accessories allow riders to select maps via an optional switch and download engine data with a laptop via a Setting Tool. FRAME Enduro riding requires maximum feedback from the bike in rough terrain, on rocks and in slippery conditions. Precisely engineered flex in the frame can greatly improve rider confidence, allowing for increased speed and improved times. SUBFRAME The polyamide subframe is more flexible than a traditional aluminium rear subframe. Combined with the longitudinal flex of the frame and the rear linkage system, this gives riders a more comfortable and confidence-inspiring feeling on the bike, allowing them to push the limits in every condition and on any terrain. The inherent characteristics of the composite subframe allow the engineers to have unlimited opportunities of integrating features such as the airbox, electronics and rear grab handle. SWINGAR

2015 Husqvarna TE 300

$7,199

Springfield, Illinois

Year 2015

Make Husqvarna

Model FE 350

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FE 350, This motorcycle is being sold on consignment and is NOT located at Hall's Cycles. It is located in Jonesboro, Arkansas. Owner will deliver to Hall's Cycles if need be. Contact Nelson @ 870-926-2953 2015 Husqvarna® FE 350 MIND BLOWING PACE AT HALF THE EFFORT With the power to rival the 450 competition and the lightweight agility of a 250, the FE 350 is in the enviable position of having the best of both worlds. The ideal combination of maximum performance and light and agile handling allows riders to tackle the most difficult terrain with increased confidence and less effort. Thanks to the compact yet powerful engine, a stable and confidence inspiring chassis, a reliable and efficient electric starting system, top-of-the line standard equipment and cutting-edge technology, the FE 350 conquers hearts, minds and podium finishes. Features May Include: ENGINE he FE 350 s engine weighs only 28.5 kg and is similar in size to the FE 250 s, but has a maximum power output in excess of 45 hp that easily puts it on the same level as the bigger 450cc competition. The smooth and easy to handle power delivery is strong from low-down all the way through to the 12,000 rpm limit. The 57.5 mm stroke and 88mm bore allow for large diameter valves. The 36.3mm titanium intake and 29.1mm exhaust valves weigh only 22.4g and 22.7g each respectively, and are operated by DLC coated finger followers. The cam timing and overall performance are tuned for Enduro style riding. CRANK SHAFT The performance demands of highly tuned engines require the most advanced crankshaft technology to maintain high performance characteristics throughout the life of the engines. ENGINE MANAGEMENT SYSTEM (EMS) The 4-stroke engines feature a Keihin electronic fuel injection and 42mm throttle body for accurate throttle response and smooth engine performance that is ideal for Enduro-style riding. Optional Husky Power accessories allow riders to select maps via an optional switch and download engine data with a laptop via a Setting Tool. FRAME Enduro riding requires maximum feedback from the bike in rough terrain, on rocks and in slippery conditions. Precisely engineered flex in the frame can greatly improve rider confidence, allowing for increased speed and improved times. SUBFRAME The polyamide subframe is more flexible than a traditional aluminium rear subframe. Combined with the longitudinal flex of the frame and the rear linkage system, this gives riders a more comfortable and confidence-inspiring feeling on the bike, allowing them to push the limits in every condition and on any terrain. The inherent characteristics of the composite subframe allow the engineers to have unlimited opportunities of integrating features such as the airbox, electronics and rear grab handle. SWINGAR

2015 Husqvarna FE 350

$7,999

Springfield, Illinois

Year 2015

Make Husqvarna

Model FE 350

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FE 350, Save thousands on this almost new FE350! Less than 100 original miles. 2015 Husqvarna® FE 350 MIND BLOWING PACE AT HALF THE EFFORT With the power to rival the 450 competition and the lightweight agility of a 250, the FE 350 is in the enviable position of having the best of both worlds. The ideal combination of maximum performance and light and agile handling allows riders to tackle the most difficult terrain with increased confidence and less effort. Thanks to the compact yet powerful engine, a stable and confidence inspiring chassis, a reliable and efficient electric starting system, top-of-the line standard equipment and cutting-edge technology, the FE 350 conquers hearts, minds and podium finishes. Features May Include: ENGINE he FE 350 s engine weighs only 28.5 kg and is similar in size to the FE 250 s, but has a maximum power output in excess of 45 hp that easily puts it on the same level as the bigger 450cc competition. The smooth and easy to handle power delivery is strong from low-down all the way through to the 12,000 rpm limit. The 57.5 mm stroke and 88mm bore allow for large diameter valves. The 36.3mm titanium intake and 29.1mm exhaust valves weigh only 22.4g and 22.7g each respectively, and are operated by DLC coated finger followers. The cam timing and overall performance are tuned for Enduro style riding. CRANK SHAFT The performance demands of highly tuned engines require the most advanced crankshaft technology to maintain high performance characteristics throughout the life of the engines. ENGINE MANAGEMENT SYSTEM (EMS) The 4-stroke engines feature a Keihin electronic fuel injection and 42mm throttle body for accurate throttle response and smooth engine performance that is ideal for Enduro-style riding. Optional Husky Power accessories allow riders to select maps via an optional switch and download engine data with a laptop via a Setting Tool. FRAME Enduro riding requires maximum feedback from the bike in rough terrain, on rocks and in slippery conditions. Precisely engineered flex in the frame can greatly improve rider confidence, allowing for increased speed and improved times. SUBFRAME The polyamide subframe is more flexible than a traditional aluminium rear subframe. Combined with the longitudinal flex of the frame and the rear linkage system, this gives riders a more comfortable and confidence-inspiring feeling on the bike, allowing them to push the limits in every condition and on any terrain. The inherent characteristics of the composite subframe allow the engineers to have unlimited opportunities of integrating features such as the airbox, electronics and rear grab handle. SWINGARM The engineers designed specific flex characteristics that optimise traction while feeding precise information to the r

1997 Honda CB750

$10,099

Countryside, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: Engine The 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight. Cylinder head The FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling. Cylinder and piston The 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1. Crankshaft A perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours. New map switch The FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear. 44 mm throttle body The FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle response, the throttle cable is mounted directly without a throttle l

2017 Husqvarna FC 350

$10,099

Countryside, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: Engine The 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight. Cylinder head The FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling. Cylinder and piston The 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1. Crankshaft A perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours. New map switch The FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear. 44 mm throttle body The FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle response, the throttle cable is mounted directly without a throttle l

2015 Kawasaki KL650EFF

$10,099

Countryside, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: Engine The 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight. Cylinder head The FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling. Cylinder and piston The 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1. Crankshaft A perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours. New map switch The FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear. 44 mm throttle body The FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle response, the throttle cable is mounted directly without a throttle l

2017 Husqvarna FE 501

$10,799

Countryside, Illinois

Year 2017

Make Husqvarna

Model FX 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FX 350, 2017 Husqvarna® FX 350 UNMATCHED VERSATILITY The FX 350 shares much of its engine and chassis architecture with the motocross FC 350, but is tailored for closed course off-road usage. With a maximum output of 58 hp, the FX 350 has a 450 rivalling power-to-weight ratio while retaining the light, agile handling of 250-class machines. This is matched with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Include a larger 6-speed transmission, large fuel capacity and an 18-inch rear wheel and the FX 350 is one of the most advanced off-road machines created by Husqvarna Motorcycles. Features may include: Chromoly steel frame The hydro-formed, laser-cut and robot-welded frame expertly crafted by WP Performance Systems is specifically designed with calculated parameters of longitudinal and torsional flex. Aluminum engine mountings benefit suspension functionality and feeling while retaining a light, compact and strong package. The frame is finished off with a premium white powder coating and standard frame protectors guaranteeing supreme protection and durability. Composite carbon fibre subframe The composite subframe is a design unique to Husqvarna showcasing pioneering technologies and innovation. This 3 piece component is made up of 30% carbon fiber making it remarkably light (3.1 lbs.) and also particularly strong. Specific care has been taken to create a certain rigidity for optimal handling and rider ergonomics. Aluminium swingarm The hollow, cast aluminum swingarm is designed to offer optimal stiffness and reliability at the least possible weight. The machining on the side by Husqvarna motorcycle engineers is another mark of quality showcasing in depth attention to detail and superior craftsmanship. Self cleaning footpeg mount The Husqvarna frame features an innovative, self -cleaning footpeg mount which prevents the build-up of dirt collected through deep ruts or muddy terrain. As a result, the footpeg will spring back into its original position even in the toughest conditions. For riders who prefer a higher footpeg set-up, the MY17 enduro footpegs can be fitted raising the position by 6mm. WP AER 48 The 48 mm split air fork features an insulated air spring and pressurized oil chamber for progressive and consistent damping. The new component is lightweight and easily adjustable via a single air pressure valve for pre-load (on the left leg) as well as easy access clickers adjusting damping with 30 clicks (on the right leg). Additionally, the air pump needed to adjust air pressure in the fork will be provided as standard. WP rear shock The WP DCC rear shock is designed to provide advanced damping characteristics while conforming to a compact and lightweight design. With a pressure balance inside t

2017 Husqvarna TE - 300

$10,099

Countryside, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: Engine The 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight. Cylinder head The FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling. Cylinder and piston The 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1. Crankshaft A perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours. New map switch The FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear. 44 mm throttle body The FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle response, the throttle cable is mounted directly without a throttle l

2017 Husqvarna FC 350

$9,299

Springfield, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, Now in stock! 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: Engine The 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight. Cylinder head The FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling. Cylinder and piston The 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1. Crankshaft A perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours. New map switch The FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear. 44 mm throttle body The FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle response, the throttle cable is mounted di

2017 Husqvarna FX350

$9,999

Springfield, Illinois

Year 2017

Make Husqvarna

Model FX350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FX350, FX 350 The FX350 shares much of its engine and chassis architecture with the motocross FC 350, but is tailored for closed course offroad usage. With a maximum output of 58 hp, the FX350 has a 450 rivaling power to weight ratio while retaining the light, agile handling of 250 class machines. This is matched with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Include a larger 6 speed transmission, large fuel capacity and an 18 inch rear wheel and the FX 350 is perhaps the greatest offroad machine ever created by Husqvarna. Engine The 350 cc DOHC engine weighs in at only 60 pounds and has a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralization as key criteria. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal center of gravity while all parts are engineered to offer the best possible performance while adding the least possible weight. Cylinder Head The FX350 features the same DOHC design as the FC 350 with polished camshafts and DLC coated finger followers reducing friction and improving overall performance. Added to the design are larger titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling. Cylinder and Piston The 88mm bore and 57.5mm stroke cylinder features a large diameter and lightweight forged bridged box type piston by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1. Crankshaft A superior quality crankshaft is at the heart of the high output, high revving FX350 engine. The plain big end bearing featuring two force fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours. intervals Crankcases The FX350 features an engine design with mass centralization and weight reduction as the main goals. All the major components have been positioned to achieve the best possible center of gravity. As a result, the motorcycle benefits from superb handling while ensuring a light and compact engine design. High pressure die cast production processes keep the overall weight to a minimum, resulting in a thin wall thickness while retaining reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers Gearbox The compact 6 speed semi close gearbox features a low friction coating on the shifting fork ensuring smooth and precise shifting. The gear lever features a design that prevents dirt build up.