Husqvarna motorcycles for sale in Illinois

1-15 of 192

Sort By

2017 Husqvarna FC 350

2017 Husqvarna FC 350

$9,299

Woodstock, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category Dirt Bikes

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, This 2017 Husqvarna FC 350 FC 350 features a 350cc cyl engine. The vehicle is Other with a Other interior. It is offered As-Is, extended warranty is available. - 2017 HUSQVARNA FC 350 - This Husqvarna is in Excellent overall exterior condition - ABS, 2017 Husqvarnar FC 350POWER AND CONTROLThe FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, high performance package.Features may include:EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13, 400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.Functional bodyworkModern and functional bodywork with traditional Husqvarna blue and yellow accents mark a simplistic yet stylish Swedish design. The ergonomics have been specifically tailored to deliver high levels of comfort and control, ergonomics and packaging. With carefully calculated tortional and longitudinal flex, the frame works in harmony with the suspension to offer sharp handling and superior comfort. These characteristics, matched to a lightweight and compact engine design, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is 30% carbon fibre and the overall 3-piece construction is remarkably light but also very strong for an overall weight of 1.4 kg. Additionally, a specific rigidity has been calculated in the component for optimal handling and rider ergonomics.SwingarmThe hollow, cast aluminium swingarm is designed to offer optimal stiffness and reliability. The machining on the side by Husqvarna Motorcycle engineers is another

2017 Husqvarna FC 350

2017 Husqvarna FC 350

$9,299

Woodstock, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, This 2017 Husqvarna FC 350 FC 350 features a 350cc cyl engine. The vehicle is Other with a Other interior. It is offered As-Is, extended warranty is available. - 2017 HUSQVARNA FC 350 - This Husqvarna is in Excellent overall exterior condition - ABS, 2017 Husqvarnar FC 350POWER AND CONTROLThe FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, high performance package.Features may include:EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13, 400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.Functional bodyworkModern and functional bodywork with traditional Husqvarna blue and yellow accents mark a simplistic yet stylish Swedish design. The ergonomics have been specifically tailored to deliver high levels of comfort and control, ergonomics and packaging. With carefully calculated tortional and longitudinal flex, the frame works in harmony with the suspension to offer sharp handling and superior comfort. These characteristics, matched to a lightweight and compact engine design, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is 30% carbon fibre and the overall 3-piece construction is remarkably light but also very strong for an overall weight of 1.4 kg. Additionally, a specific rigidity has been calculated in the component for optimal handling and rider ergonomics.SwingarmThe hollow, cast aluminium swingarm is designed to offer optimal stiffness and reliability. The machining on the side by Husqvarna Motorcycle engineers is another

2014 Husqvarna FE 250

2014 Husqvarna FE 250

$7,195

Springfield, Illinois

Year 2014

Make Husqvarna

Model FE 250

Category -

Engine -

Posted Over 1 Month

2014 Husqvarna FE 250, Almost New! Only 58 miles. Lots of accessories. 2014 Husqvarna FE 250 Surgically precise agility Agility, handling and a super precise chassis allow riders of all levels to easily tackle all sorts of terrain and challenges. The low weight and powerful and torquey engine, matched to carefully engineered ergonomics make the TE 250 a formidable race weapon, one of the finest Enduro bikes to wear the glorious Husqvarna badge.Rekluse Core EXP 3.0Enduro Engineering Radiator BracesEnduro Engineering HandguardsBRP Sub Mount Scotts Steering StabilizerEtc.

2011 Husqvarna TXC 511 TCX 511

2011 Husqvarna TXC 511 TCX 511

$2,995

Peoria, Illinois

Year 2011

Make Husqvarna

Model TXC 511 TCX 511

Category -

Engine -

Posted Over 1 Month

2011 Husqvarna TXC 511 TCX 511, Used 2011 HUSQVARNA TCX 511 owned by our Peoria store and located in SPRINGFIELD. Give our sales team a call today - or fill out the contact form below.

2014 Husqvarna TC 250

2014 Husqvarna TC 250

$3,895

Peoria, Illinois

Year 2014

Make Husqvarna

Model TC 250

Category -

Engine -

Posted Over 1 Month

2014 Husqvarna TC 250, Used 2014 HUSQVARNA TC 250 Motorcycle owned by our Peoria store and located in SPRINGFIELD. Give our sales team a call today - or fill out the contact form below.

2011 Husqvarna TXC 511 TCX 511

2011 Husqvarna TXC 511 TCX 511

$2,995

Peoria, Illinois

Year 2011

Make Husqvarna

Model TXC 511 TCX 511

Category -

Engine -

Posted Over 1 Month

2011 Husqvarna TXC 511 TCX 511, Used 2011 HUSQVARNA TCX 511 owned by our Peoria store and located in SPRINGFIELD. Give our sales team a call today - or fill out the contact form below.

2013 Husqvarna TR 650 TERRA

2013 Husqvarna TR 650 TERRA

$4,700

La Salle, Illinois

Year 2013

Make Husqvarna

Model TR 650 TERRA

Category -

Engine -

Posted Over 1 Month

2013 Husky TR650 Terra, 7500 easy miles.  Awesome class-leading power from the BMW F650 based engine. Well maintained, recent oil & filters. Excellent condition, no dings or dents.  Runs great! SW Motech engine/tank guards, skidplate, & luggage rack. BMW Handguards. 12V Powerlet. New TKC80 front tire, Heidenau K60 rear @50% left.  Great do-all thumper!  You won't find one in better shape, with these extras for the price! Located N IL

2014 Husqvarna 250

2014 Husqvarna 250

$3,200

Canton, Illinois

Year 2014

Make Husqvarna

Model 250

Category -

Engine -

Posted Over 1 Month

Street title. 75 hrs approx

2014 Husqvarna TE 300

2014 Husqvarna TE 300

$5,499

Springfield, Illinois

Year 2014

Make Husqvarna

Model TE 300

Category -

Engine -

Posted Over 1 Month

2014 Husqvarna TE 300, Rekluse Clutch, Carbon Fiber Exhaust Guard, Radiator Braces, Handguards. 2014 Husqvarna TE 300 Extreme performance to take on the world Extreme Enduro conditions have met their match. The astounding power and torque characteristics of the 300cc 2-stroke engine are ideal to get riders over any obstacle. Extreme performance and low maintenance costs together with top-of-the line components, quality construction, bullet-proof reliability and electric start. The TE 300 is the weapon of choice for attacking any terrain with peerless power matched to a light and nimble chassis.

2016 Husqvarna TC 250

2016 Husqvarna TC 250

$5,699

Springfield, Illinois

Year 2016

Make Husqvarna

Model TC 250

Category -

Engine -

Posted Over 1 Month

2016 Husqvarna TC 250, Low Hours! 2016 Husqvarna® TC 250 HIGH INTENSITY THRILLS Detail changes to the MY16 TC 250 are aimed at refining the riding experience thanks to a new CNC machined triple clamp with rubber damping and a new seat cover that greatly improves grip and durability. Stronger braking performance is guaranteed by new disc brakes and the 100 g lighter spokes reduce unsprung weight for improved agility. The standard handlebar map switch, polyamide rear subframe, hydraulic clutch and Brembo brakes make the TC 250 a formidable competitor to the more complex 4-strokes. Features May Include: IGNITION The ignition can be modified according to track layout and rider preference. The CDI unit features two ignition curves that can be switched via the handlebar-mounted Husqvarna accessories map select switch fitted as standard. ENGINE The powerful 250 cc 2-stroke engine features an exhaust power valve to boost power and torque along the entire rev range. A precise 5-speed gearbox and smooth hydraulic clutch ensure accurate gear changes and perfect clutch modulation with almost no maintenance. CYLINDER The cylinder head has been designed for throttle response and torque and is perfectly mated to the power valve for optimal power delivery in every circumstance. FRAME The engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal feedback and complete confidence in every situation. This was achieved by designing the lightweight chromium molybdenum frame with precise longitudinal flex that helps absorb impacts from the rear wheel, working together with the suspension for better comfort and greater feedback. The torsional rigidity enhances turn-in, sharp handling and stability even on the roughest terrain, giving the rider complete confidence in finding his lines and increasing his pace lap after lap. SUBFRAME The three-piece composite subframe, made of high strength polyamide with a precision injection moulded production process, has been designed to offer stiffness while flexing more than an aluminium subframe, complementing the flex characteristics of the frame in order to offer optimum rider feedback and feeling in all conditions. The lightweight design offers engineers unlimited opportunities in integrating features such as all the electronics and the airbox. SWINGARM The single component construction of the aluminium swingarm eliminates welding, providing more reliability, stability and safety, as well as superior quality and consistent behaviour over time compared to other construction processes. 4CS FORK WP 4CS fork is developed specifically for Motocross. As with all 4CS forks by WP, the clicker settings can be easily and quickly adjusted via the dials on the top of the fork tubes. T

2015 Husqvarna FC 350

2015 Husqvarna FC 350

$5,499

Springfield, Illinois

Year 2015

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FC 350, Only 17 Hours! 2015 Husqvarna® FC 350 BALANCE AND PRECISION With top-level performance guaranteed by the lightweight agility of a 250 and the hard-hitting power of a 450, the FC 350 carves through turns effortlessly and powers down straights aggressively. Standard equipment such as the electric start system and the handlebar-mounted map switch highlight the FC 350 s technological edge over the competition. Features May Include: ENGINE With peak power of 54 horsepower in a package of roughly the same dimensions as the FC 250 engine, the FC 350 offers 450-class performance with 250-class size. Superb engineering and manufacturing expertise combine to make the impressive engine that powers the FC 350 to the top of the power output charts. The titanium valves are ultra-lightweight, weighing only 22.4g and have a diameter of 36.3mm each on the intake side, and 22.7g with a diameter of 29.1mm on the exhaust side. Combined with the Diamond Like Carbon (DLC) coated followers, the FC 350 engine is capable of reaching a 13,000 rpm ceiling. The yellow valve cover tops-off a technological marvel. The handlebar mounted map switch is a standard feature and allows the rider to switch between maps while riding, adjusting power delivery and engine performance according to rider fatigue and track conditions. ENGINE MANAGEMENT SYSTEM The electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power. Great attention was dedicated to ensuring that cleaning and washing the bike will not damage the electronics. The wire harness, lead wire, and high quality sealed critical connectors ensure that a jet wash poses no threat. The throttle position sensor (TPS) is also water resistant and protected. CRANKSHAFT, CONROD AND PISTON The plain big end bearing and two force-fitted shells that run directly on the crank pin are lubricated by the engine s pressure lubrication in order to maintain durability and long service intervals (100 hours before changing con rod, con rod bearing and crank pin). The FC 350 s power output and engine characteristics require the highest quality components, therefore the entire crankshaft, together with the con rod, is produced by industry leader Pankl. The CP-Carrillo forged box-type piston combines maximum performance and reliability with minimum weight, only 270g. The compression ratio is 13.65:1. FRAME The engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal fee

2017 Husqvarna FE 350

2017 Husqvarna FE 350

$5,499

Springfield, Illinois

Year 2015

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FC 350, Only 17 Hours! 2015 Husqvarna® FC 350 BALANCE AND PRECISION With top-level performance guaranteed by the lightweight agility of a 250 and the hard-hitting power of a 450, the FC 350 carves through turns effortlessly and powers down straights aggressively. Standard equipment such as the electric start system and the handlebar-mounted map switch highlight the FC 350 s technological edge over the competition. Features May Include: ENGINE With peak power of 54 horsepower in a package of roughly the same dimensions as the FC 250 engine, the FC 350 offers 450-class performance with 250-class size. Superb engineering and manufacturing expertise combine to make the impressive engine that powers the FC 350 to the top of the power output charts. The titanium valves are ultra-lightweight, weighing only 22.4g and have a diameter of 36.3mm each on the intake side, and 22.7g with a diameter of 29.1mm on the exhaust side. Combined with the Diamond Like Carbon (DLC) coated followers, the FC 350 engine is capable of reaching a 13,000 rpm ceiling. The yellow valve cover tops-off a technological marvel. The handlebar mounted map switch is a standard feature and allows the rider to switch between maps while riding, adjusting power delivery and engine performance according to rider fatigue and track conditions. ENGINE MANAGEMENT SYSTEM The electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power. Great attention was dedicated to ensuring that cleaning and washing the bike will not damage the electronics. The wire harness, lead wire, and high quality sealed critical connectors ensure that a jet wash poses no threat. The throttle position sensor (TPS) is also water resistant and protected. CRANKSHAFT, CONROD AND PISTON The plain big end bearing and two force-fitted shells that run directly on the crank pin are lubricated by the engine s pressure lubrication in order to maintain durability and long service intervals (100 hours before changing con rod, con rod bearing and crank pin). The FC 350 s power output and engine characteristics require the highest quality components, therefore the entire crankshaft, together with the con rod, is produced by industry leader Pankl. The CP-Carrillo forged box-type piston combines maximum performance and reliability with minimum weight, only 270g. The compression ratio is 13.65:1. FRAME The engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal fee

2017 Husqvarna TC 65

2017 Husqvarna TC 65

$4,999

Countryside, Illinois

Year 2017

Make Husqvarna

Model TC 65

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna TC 65, 2017 Husqvarna® TC 65 SET YOUR SIGHTS ON NEW HORIZONS The TC 65 will be the first time many young riders experience a full race bike featuring a manual clutch and gearbox. This transition is made easy with a hydraulic clutch and precise 6-speed gearbox. The TC 65 features the same level of quality found on the larger motocross range with premium components fitted as standard. Features may include: Engine Featuring the latest in 2-stroke technology, the TC 65 is highly competitive in the 65cc class. Apart from using the lightest and most durable materials, the engine features a pressure controlled exhaust valve which contributes in delivering top level performance. Additionally, the engine features a manual 6-speed transmission and hydraulic clutch allowing the rider to have full control of the power delivery. Cylinder The high performance cylinder is made from lightweight and durable aluminium and incorporates a pressure controlled exhaust valve (PCEV) which provides unrivalled performance giving the young motocross rider a distinct advantage. Clutch The reliable and light hydraulic clutch system guarantees even wear, near maintenance-free operation and perfect modulation in every condition. Meaning that play is constantly compensated so that the pressure point and function of the clutch remain identical in cold or hot conditions, as well as over time. Frame The high strength chromoly steel frame is produced by WP Performance Systems and integrates carefully calculated parameters of longitudinal flex and torsional rigidity to benefit handling and suspension functionality. It guarantees easy handling and precise cornering, along with outstanding stability. The subframe is fitted with 4 screws to the frame and is made of lightweight aluminium. WP AER 35 Featuring the latest in suspension technology, the TC 65 is fitted with a revolutionary WP AER 35 fork. Besides being very light weight, the 35 mm USD forks feature exceptional damping and comfort characteristics allowing the rider to push the limit with complete confidence. With 215 mm of wheel travel, the air unit in the left fork leg can also be adjusted easily with the use of an air pump for rider preference, weight or track conditions. Rear shock Linked directly to the swingarm, the WP monoshock is matched perfectly to the front forks for the perfect balance and damping characteristics. Additionally, the rear shock offers 270mm of suspension travel and is fully adjustable allowing it to be tailored to rider preferences or track conditions. Brakes Featuring the same level of technology offered on the full-size motocross range, the TC 65 is fitted with hydraulically operated brake callipers and large waved front (198mm) and rear (160mm) brake discs. The system ensures advan

2017 Husqvarna 701 Supermoto

2017 Husqvarna 701 Supermoto

$4,999

Countryside, Illinois

Year 2017

Make Husqvarna

Model TC 65

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna TC 65, 2017 Husqvarna® TC 65 SET YOUR SIGHTS ON NEW HORIZONS The TC 65 will be the first time many young riders experience a full race bike featuring a manual clutch and gearbox. This transition is made easy with a hydraulic clutch and precise 6-speed gearbox. The TC 65 features the same level of quality found on the larger motocross range with premium components fitted as standard. Features may include: Engine Featuring the latest in 2-stroke technology, the TC 65 is highly competitive in the 65cc class. Apart from using the lightest and most durable materials, the engine features a pressure controlled exhaust valve which contributes in delivering top level performance. Additionally, the engine features a manual 6-speed transmission and hydraulic clutch allowing the rider to have full control of the power delivery. Cylinder The high performance cylinder is made from lightweight and durable aluminium and incorporates a pressure controlled exhaust valve (PCEV) which provides unrivalled performance giving the young motocross rider a distinct advantage. Clutch The reliable and light hydraulic clutch system guarantees even wear, near maintenance-free operation and perfect modulation in every condition. Meaning that play is constantly compensated so that the pressure point and function of the clutch remain identical in cold or hot conditions, as well as over time. Frame The high strength chromoly steel frame is produced by WP Performance Systems and integrates carefully calculated parameters of longitudinal flex and torsional rigidity to benefit handling and suspension functionality. It guarantees easy handling and precise cornering, along with outstanding stability. The subframe is fitted with 4 screws to the frame and is made of lightweight aluminium. WP AER 35 Featuring the latest in suspension technology, the TC 65 is fitted with a revolutionary WP AER 35 fork. Besides being very light weight, the 35 mm USD forks feature exceptional damping and comfort characteristics allowing the rider to push the limit with complete confidence. With 215 mm of wheel travel, the air unit in the left fork leg can also be adjusted easily with the use of an air pump for rider preference, weight or track conditions. Rear shock Linked directly to the swingarm, the WP monoshock is matched perfectly to the front forks for the perfect balance and damping characteristics. Additionally, the rear shock offers 270mm of suspension travel and is fully adjustable allowing it to be tailored to rider preferences or track conditions. Brakes Featuring the same level of technology offered on the full-size motocross range, the TC 65 is fitted with hydraulically operated brake callipers and large waved front (198mm) and rear (160mm) brake discs. The system ensures advan

2017 Yamaha WR 250R

2017 Yamaha WR 250R

$9,499

Springfield, Illinois

Year 2017

Make Husqvarna

Model FE 250

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FE 250, We are now accepting preorder deposits. Preorder now and reserve one before they gone! 2017 Husqvarna® FE 250 TOTAL ENDURO PRECISION The lightest, most compact Husqvarna 4-stroke enduro bike. Smooth 4-stroke torque and power in a much lighter and more compact chassis. A new precision-built frame offers improved agility, better bump absorption and optimum suspension functionality while only weighing 8.8 kg. New laterally-mounted head-stays increase handling agility and reduce vibration. All 2017 4-stroke models have new header pipes and shorter mufflers for maximum performance within the FIM noise limits. Enduro riders face some of the toughest conditions, always looking for positive traction to drive the bike forward. The 2017 range of 4-strokes have an optimised map-switch, which also activates the Traction Control feature. Features may include: WP Xplor 48 The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up. WP rear shock The WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption. Brembo brakes Class-leading Brembo callipers and controls with high quality GSK discs deliver superior stopping power instilling confidence in all situations. For MY17, the rear brake calliper uses a smaller piston diameter 24mm instead of 26mm, coupled with a 10mm longer rear brake lever the system delivers improved modulation and feeling. ODI lock on grips The ODI lock-on grip on the left side does not require gluing, while on the right, the vulcanised grip features an integrated throttle mechanism. The assembly has easy free-play adjustment and, by changing a cam, throttle progression can be altered. Engine The new 250cc engine is re-designed to be more powerful, lighter and more compact. All major components and shaft arrangements are carefully positioned to best suit the performance and handling characteristics of the overall package. As a resul