Rolling Chassis Motorcycles for sale

1-15 of 1,435

Sort By

1998 cr250 rolling chassis

1998 cr250 rolling chassis

$375

Royal Oak, Michigan

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

Every thing but the motor

Other Makes : Rickman Rolling Chassis Motocross 1973 rickman nickel plated frame mx rolling chassis w rickman parts

Other Makes : Rickman Rolling Chassis Motocross 1973 rickman nickel plated frame mx rolling chassis w rickman parts

$850

Nashua, New Hampshire

Category Off Road Motorcycles

Engine 250

Posted Over 1 Month

Some bidders are not seeing all the photos. I use my own photo service so they are larger and shown below. Please scroll all the way down. I am very careful about my descriptions having gone on many wild goose chases to see bikes and cars that turned out to be in far less condition than advertised. I am sure many of you have been in the same boat so I will do my utmost to describe this so that there are NO disappointments or surprises. 1973 Rickman rolling nickel plated MX chassis with manufacturers plate still in place reading 11/72 and S/N 6968 Z. Someone painted frame silver but we spent 5 mins cleaning a partial frame tube and shines beautifully although there are some spots near engine area that show rust thru paint. It has some motor mounts welded in place but they can be removed and new ones made up to fit your engine choice. I was told plates were for a Hodaka and originally it was for a Zundapp motocross. Picture a Ducati single or whatever. Has Rickman rear hub and conical front hub and Betor forks. No title but can get a clear New Hampshire title within 3 weeks of sale for an extra $100.00 if needed. Please feel free to contact me thru eBay with any questions you may have. I will also answer any questions by phone if you wish. Please note that I use my own picture service so you get larger and higher quality photos and I took many to show every aspect of this bike so you get no unwanted surprises. And unlike many of the listings on eBay, I have gone to great lengths to fully disclose any problems. I cannot crate and buyer is responsible for shipping or can pick up here. Can hire local to deliver to Forward Air in Boston for an extra $100.00 if that helps although ground transport is quite a bit cheaper. Motorcycle is sold as is as shown with no warrienties expressed or implied but I stand behind my description 100%. Buyer must pay $500.00 deposit thru paypal within 1 day and balance within 7 days by cash in person or certified or personal check but payment must clear before being shipped. I will sell overseas but new owner is responsible for all aspects of shipping. Bike located in Nashua, New Hampshire. I will be happy to answer any questions and phone number is available if you have any questions or by email.

Custom Built Motorcycles : Pro Street ROLLING THUNDER ROLLING CHASSIS ROLLER

Custom Built Motorcycles : Pro Street ROLLING THUNDER ROLLING CHASSIS ROLLER

$6,450

Oviedo, Florida

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

RED ROLLERAll new except as noted: Ø ROLLING THUNDER SLX FRAME, DAYTEC TANK (I have the rear axle covers painted, just not installed)Ø XTREME MACHINE CHROME WHEELS (300 REAR, 21 FRONT)o SAW TOOTH FLOATING ROTORSo INBOARD REAR BRAKE SET-UPØ CHROME BDL HAND CONTROLSØ PRO-1 TREE (lower tree started pitting, forks are not new)Ø PM 4 piston FRONT BRAKEØ ALL WIRING COMPLETE WITH TURN SIGNALS AND HORNØ HOUSE OF COLORS BRANDY WINE OVER BLACK BASEØ 6 SPEED TRANNYØ LEATHER SEATØ FORWARD CONTROLS ARE FROM ANOTHER BIKE I HAD. (I keep them because they fit short people)This has never had a drop of gas in it. During the time it was being built, I ran across a SCREAMIN EAGLE SPRINER CVO I couldn’t pass on. Therefore this bike never was titled. I have MSO for FRAME & TRANNY.The motor, primary, pipes & ign are going on a chopper project and are not included in this auction.Call or Text 407-417-1579, Mike I can help arrange shipping. buyer is responsible for all shipping cost.

2004 cr500 aluminum frame rolling chassis

2004 cr500 aluminum frame rolling chassis

$3,000

Ludington, Michigan

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

This is a 2004 crf450r that has been converted already to accept a cr500 engine. I wrecked the cr500 engine shown in the picture. It kicked back and broke the crankcase while I was starting it. This posting is for everything except the engine and cdi. It comes with a list of stuff including, but not limited to: New seat cover New handle grips New shock linkage and swing arm bearings New rear hub with bearings installed New stainless steel brake lines, front and rear New axle adjuster blocks New moose side/kick stand Paddle tire on separate rim with brake disc and sprocket Brand new extra weisco piston Swing arm extensions for hill climbs Extra header pipe, has repair welds Extra rear hub Flywheel weight Rear brake with longer brake line for use with extensions Extra front brake line Extra head I'm sure I'm forgetting something. This bike will be wicked once again, just install your running motor. The broken motor is currently out of the bike. If you have a motor and want my rolling chassis, I will help you install your motor in my garage if you give me full asking price. I took this motor out in a couple hours, I assume I can put yours in, in a similar amount of time. I am curious to see what's out there. Please email since I can usually email at work. Thanks for looking!

Custom Built Motorcycles : Bobber Rolling Chassis

Custom Built Motorcycles : Bobber Rolling Chassis

$2,500

Waxahachie, Texas

Year 2015

Make Custom Built Motorcycles

Model Bobber

Category -

Engine -

Posted Over 1 Month

Selling a Rolling Chassis. Comes with main harness. Also have front and rear fenders in the raw, rest of bike has new paint. Front wheel is 23" and Rear wheel is 21" with a 280 tire. Also have a Baker 6 speed transmission for EXTRA COST if wanted.

2004 Thompson Rolling Chopper Chassis Custom Built

2004 Thompson Rolling Chopper Chassis Custom Built

$7,500

Belpre, Ohio

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

2004 Thompson Rolling Chopper Chassis Custom Built Perfect project for the weekend. All it needs is an Type S engine V Twin. Frame is already powder coated, go with any color that you want. Comes with the custom rims and tires. Thompson frame Forks Powder coated 250 tire Billit wheel Spoke front wheel Forward controls Handlebars Complete chassis Qualified buyers may be eligible for Financing, Nationwid MAKE: Other MODEL: Chopper Chassis

Kawasaki : KDX 2002 KDX Rolling Chassis

Kawasaki : KDX 2002 KDX Rolling Chassis

$600

Indianapolis, Indiana

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

2002 KDX 200 Rolling ChassisYou are looking at a super clean KDX200 rolling chassis. We used the motor from this bike for a hybrid build. This was a low hour running and riding bike when we pulled the engine. The bike is complete less engine, ignition, exhaust and throttle/clutch. Has Devol radiator guards and pro taper bars. Buy it for parts or throw an engine in it for a spare bike. Bike is listed with a clear title but comes with a bill of sale. Not interested in trades or low ball offers. Its a steal at the buy it now price. Bike is sold as is with no warranty expressed or implied.

Custom Banshee Lone Star Rolling Drag Chassis

Custom Banshee Lone Star Rolling Drag Chassis

$5,500

Loma Linda, California

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

-Inland ATV- -We take trade Ins- Motorcycles - ATV's - SidexSides For Sale: Custom Banshee Lone Star Rolling Drag Chassis: $5,500 *Registered with Title* -Lone Star Chrome Moly Chassis -Lone Star Extended Swing Arm -Lone Star Billet Aluminum 40mm Axle -Lone Star Steering Stem -Lone Star Front A Arms/Front End -Custom Painted Laker Plastics -Boss Racing Spindle Mount Rims with Smooth Buff Tires -After Market Aluminum Tank -Torch Works Over Sized Aluminum Radiator *Will not part out *Will not take offers -For more information and/or bikes and parts for sale, visit us at InlandATV.com-

Custom Built Motorcycles : Chopper CUSTOM CHOPPER ROLLING CHASSIS

Custom Built Motorcycles : Chopper CUSTOM CHOPPER ROLLING CHASSIS

$6,000

Fort Wayne, Indiana

Year 2006

Make Custom Built Motorcycles

Model Chopper

Category -

Engine -

Posted Over 1 Month

UP FOR SALE IS A 2006 CUSTOM BUILT CHOPPER ROLLING CHASSIS. THIS IS A BIG BOY!! 20'' OVER FRONT END, 21'' FRONT WHEEL, 18'' 280 SERIES REAR TIRE BOTH ARE 120 SPOKE WHEELS. CHASSIS IS SET UP FOR A RIGHT SIDE DRIVE TRANSMISSION. FUEL TANK CUSTOM MADE FOR THIS CHASSIS BY FAT KATZ.REAR FENDER ALSO FAT KATZ. FRAME IS MANUFACTURED BY DAKOTA THUNDER.BIKE HAS A CLEAN INDIANA MVIN BUILDERS/ASSEMBLED TITLE.I STARTED THIS BIKE IN 2005 AND BUILT IT UP ENOUGH TO APPLY FOR MY TITLE AND THEN RAN INTO SOME HARD TIMES AND NEVER GOT A CHANCE TO FINISH. ALL OF THE HARD WORK IS DONE AND IS ALMOST READY TO COME APART FOR PAINT. ALTHOUGH THIS BIKE HAS BEEN SITTING FOR AWHILE IT HAS ACQUIRED A VERY NICE SHEEN OF SURFACE RUST AS YOU CAN SEE IN THE PICS. MYSELF THOUGHT THIS WOULD MAKE AN AWESOME FINISH COLOR AS SOME OF THE CHROME ON THE BIKE HAS STARTED TO PIT AS WELL. A MORE MODERN TOUCH WITH A ROUGH FINISH. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO ASK. THANK YOU!

Honda : CBX 1979 honda cbx chopper rolling chassis

Honda : CBX 1979 honda cbx chopper rolling chassis

$2,500

Cornelia, Georgia

Year 1979

Make Honda

Model CBX

Category Cruiser Motorcycles

Engine -

Posted Over 1 Month

TIMS is cleaning out the project warehouse--this auction is for a project i just never found time to finish--it is a super cool chopper that was custom built to fit the honda cbx motor--i got it from the guy who built it and he had to move overseas and didnt have the time to finish it-he had a blown up motor in it along with carbs that were in bad shape as well so we removed them thinking we would add another motor and carbs later--all this bike likes to be finished is to put a good motor in it with carbs and fabricate an exhaust system to your taste and hook up all the electricals and provide a electronic universal speedo/tach gauge for it--all the coils and other electrics fit nicely hidden under the seat for a clean look, i would count on painting it as well as its a pretty lame paint scheme that would have been the 1st thing i would change if i were to have completed this bike--it has totally custom wheels and new tires, arlen ness controls and lowers, -- a lot of time was put into this chopper to be totally trick from front to rear--he invested over 10k in parts alone and countless hours of labor--this cbx project can be bought on the cheap and wouldnt take a lot to finish and youd have a one of a kind cbx that would get all the attention at any bike night or even bikeweek----TIMS will assist in shipping anywhere in the world at new owners expense-- 500 gets it to most us locations with a professional bike shipping company ive shipped over 100 bikes with as well--check out TIMS other auctions for more cool cbx parts and bikes--

Custom Built Motorcycles : Chopper custom rolling chassis with NJ TITLE

Custom Built Motorcycles : Chopper custom rolling chassis with NJ TITLE

$6,000

Beachwood, New Jersey

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

ROLLING CHASSIS ONLY,, for sale is a 2004 Green County Chopper custom motorcycle (viper 250). Yes the bike is being sold with a New Jersey title.The bike is being sold with everything on it EXCEPT motor,trans,primary. Yes everything goes tanks,fenders,wheels,handlebars,throttle cables,brake calipers,complete.Also comes with an extra rear fender and seat. just add your powertrain.any questions call Pat at 201-522-5137. Buyer is responsible for pick up or shipping,will help if local.Bike was built 2 months ago for my son,wants to go in different direction now.

Custom Built Motorcycles : Chopper Springer Soft Tail Rolling Chassis

Custom Built Motorcycles : Chopper Springer Soft Tail Rolling Chassis

$7,000

Chesapeake, Virginia

Year -

Make Custom Built Motorcycles

Model Chopper

Category -

Engine -

Posted Over 1 Month

Rolling Chassis. No expense spared. This was to be my dream bike but was never completed. Over $8000 invested. My loss is your gain! Harley Davidson OEM Springer front end Santee softtail frame, backbone factory stretched 2” with MSO Todd's Cycle 17” Springier bar 1 ¼ thick gloss black Hammer Custom Cycles risers Hidden mount steel struts Iron House Ranger Seat 240/18 Avon rear tire 90/21 Avon front tire KC International 21 x 2.15 mammoth 52 spoke with black powder coat rim KC International 18 x 8.5 mammoth 52 spoke with black powder coat rim Tires professionally mounted with care to not scratch powder coat Custom air brush paint set. Harley bar & shield ghosted into tank. Must see in person as the pictures really do not fully capture it. Iron Horse stretched stainless steel gas tank Custom round Oil tank Harley softail kickstand

Custom Built Motorcycles : Pro Street PRO-STREET SOFTAIL ROLLING CHASSIS

Custom Built Motorcycles : Pro Street PRO-STREET SOFTAIL ROLLING CHASSIS

$3,500

Bedford, Pennsylvania

Year 2005

Make Custom Built Motorcycles

Model Pro Street

Category -

Engine -

Posted Over 1 Month

This chassis is a right side drive with 330 rear tire. The frame is configured to act as an oil tank and will hold over 5 quarts. The front end pictured is for a fit up and included. Also included with this auction is a new American Suspension air ride front end, air pump with tank, and Arlen Ness right side exhaust. Email for additional photos. $3500.00 Buyer is responsible for vehicle pick-up or shipping.

Other Makes HARLEY-DAVIDSON SPORTSTER STYLE RIGID SPRINGER ROLLING CHASSIS

Other Makes HARLEY-DAVIDSON SPORTSTER STYLE RIGID SPRINGER ROLLING CHASSIS

$2,695

Gardena, California

Year 2015

Make Other Makes

Model -

Category -

Engine -

Posted Over 1 Month

HARLEY-DAVIDSON SPORTSTER MOTOR STYLE ROLLING CHASSIS - FOR TOTAL CUSTOM - ALL NEW! LOST INTEREST FORCES SALE!! - KRAFT TECH frame, DNA Springer Fork, wheels & WWW Avon Tires, complete front caliper kit included (NOT PICTURED), and set up for IRONHEAD through 2003 EVOLUTION SPORTSTER MOTOR. Note: NOT set up for 2004-up rubber mounted motor. All parts ARE NEW as bike was never built. Over $4,400 invested. Manufacturer's Statement of Origin included. MOTOR/TRANS IN PICTURES NOT INCLUDED - FOR VISUAL ONLY!! Note: SOLD AS PICTURED GET A GREAT DEAL ON A GREAT ITEM! PLEASE READ THIS PRIOR TO BUYING or QUESTIONS!! 1) PLEASE DO NOT 'PURCHASE' IF YOU ARE NOT COMPLETELY READY TO BUY. 2) ASK ANY QUESTIONS PRIOR TO BUYING TO ENSURE TOTAL SATISFACTION AS THERE ARE NO RETURNS. WE DO NOT RESPOND TO SHiPPING QUOTES 3) COMPLETE YOUR PURCHASE AS AGREED. YOU ARE EXPECTED TO HANDLE YOUR PURCHASE TIMELY, RESPECTFULLY, AND ACCORDING WITH ALL E-BAY POLICIES. WE WILL EXCERCISE OUR LEGAL RIGHTS FOR FRAUDULENT PURCHASE/BIDDING OR BREECH OF CONTRACT. 4) IF YOU ARE SATISFIED WITH YOUR PURCHASE WE WOULD BE HONORED BY A POSITIVE FEEDBACK RATING! - PLEASE CONTACT US FOR ANYTHING UNSATISFACTORY - We will do our best to accomodate any buyer with a REALISTIC issue after purchase if you contact us directly. Otherwise, it is out of our control. We want all our purchasers to have a positive buying experience and keep us in mind for future needs! CHECK OUR OTHER AUCTIONS!! *We sell many new items once packaging has lost it's appearance, has no package, is discontinued, or we have more than necessary. Also offered are take-off motorcycle parts with good use to others. We describe parts as accurately as possible, so please ask any questions prior to purchase to ensure your satisfaction. Full payment due upon purchase MOTORCYCLE MICHAEL'S is a full service store in LOS ANGELES specializing in AMERICAN V-TWINS. We can be reached at 310-328-3377 Tuesday-Saturday from 9am-6pm or visit us online at www.motorcyclemichaels.com THANK YOU FOR VIEWING OUR ITEM!!

Custom Built Motorcycles : Chopper Special construction chopper rolling chassis.

Custom Built Motorcycles : Chopper Special construction chopper rolling chassis.

$14,000

Sun Valley, California

Year 2015

Make Custom Built Motorcycles

Model Chopper

Category -

Engine 124

Posted Over 1 Month

21" front xtreme machine spade wheels with brake rotors. 18" rear 250 xtreme machine spade wheels with brake rotors. New S&S 124 engine. New 6 speed baker transmission. 6" up single down tube with a 4 inch stretch in the backbone. 38 Degree rake. Matt Hotch Pop up gas tank filler.