2016 Husqvarna TE 300, 2016 Husqvarna® TE 300 EXTREME ENDURO PERFORMANCE TO TAKE ON ANY TERRAIN The 300 cc engine puts out 54 hp, and with an overall weight of just 104.6 kg without fuel, the TE 300 combines extreme performance and solid reliability, with typically low 2-stroke maintenance costs. The astonishing performance potential is easily accessible thanks to the updated forks, modified front-end geometry and revised shock setup. The power is confidently controlled through the new Brembo hydraulic clutch and smooth 6-speed gearbox. Premium components and equipment include electric and kick start, standard handlebar map switch, Brembo brake calipers and the largest capacity fuel tank in the competition enduro segment. Features May Include: ENGINE With a 54 hp power output, the TE 300 is the most powerful 2-stroke engine available today. The engine features a sophisticated exhaust valve that optimises power delivery and, combined with the Boyesen reed valve, offers excellent response and durability. STANDARD MAP SWITCH The engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to rider preference, conditions and terrain. Further optimisation of the power delivery can be obtained by varying the spring stiffness in the exhaust valve. NEW BREMBO HYDRAULIC CLUTCH The TE 300 now features a new Brembo hydraulic clutch system. The high quality clutch system guarantees perfect modulation of the clutch in every condition. This means that the play is constantly compensated so that the pressure point and the function of the clutch remain identical in cold or hot conditions and over time. The Brembo clutch also features even wear characteristics and is nearly maintenance-free. ELECTRIC AND KICK START Standard electric start ensures effortless and reliable starting that is especially useful in difficult terrain. The TE 250 and TE 300 2-strokes have both an electric and a kick starter as standard. PERFECT ERGONOMICS Ergonomics play a major role in rider feeling and confidence, so the handlebar can be adjusted in 4 different positions to adapt to a wide variety of riders. The stylish and modern bodywork has been designed for a perfect fit of man and machine, allowing for total control in all conditions for the most diverse body sizes. The new seat cover is highly resistant and greatly improves grip compared to the previous material. The colour is now a deep blue that integrates perfectly with the new colour of the bodywork. NEW FRONT AXLE AND FORK SHOES Detail improvements and optimisation on the MY16 enduro bikes are based on the updated front end where a new 22 mm front axle with specific fork shoes replaces the previous 26 mm axle. The new axle is lighter, and the shoes have shorter offset and increased trail, for more stability and better front-e
2017 Husqvarna TE 300, 2017 Husqvarna® TE 300 LIMITLESS ENDURO There is no wiser choice for serious hard- and extreme-Enduro riders. Built to tackle extraordinary challenges, the 2017 model is completely new and boasts improved performance, reduced weight and smoother power across a wider rev range. Redesigned bodywork and chassis are thinner between the legs, slightly shorter front to back and less tall - keeping the centre of gravity low and centred. This makes movement easier in extreme situations. The new engine design has a laterally-mounted counter balancer shaft to significantly reduce vibrations and offers a smoother and more comfortable ride for even more hours in the saddle. WP's new enduro-specific Xplor forks and shock will make tackling the roughest terrain much easier. Features may include: Engine The 300cc 2-stroke engine sets the benchmark in unrivalled power and lightweight construction. The engine has a completely new construction featuring new shaft arrangements for improved mass centralisation, a new counter balancer shaft reducing vibration, a new twin-valve controlled power valve and re-worked 6-speed enduro gearbox. Counter-balancer The new engine design allows for the implementation of a laterally mounted counter-balancer. The balancer is integrated in a very compact way and significantly reduces vibrations resulting in a smoother and more comfortable ride. Crankcase The lightweight, die-cast engine casings are developed to accommodate new shaft arrangements. The clutch shaft is now 8mm higher while the crankshaft position is 27mm higher centralising oscillating mass and improving ride-ability Carburettor The TE 300 features a 38mm flat slide Mikuni TMX carburettor replacing the previous Keihin model. This new carburettor provides a smooth and controllable power delivery with optimal performance over the entire RPM range. Additionally, the new Mikuni model is less sensitive to changes in temperature and altitude which reduces the need for setting changes in different conditions. Electric and kick start The TE 300 is fitted with a new electric starter located below the engine. This position ensures that the unit is always protected while the new design is less complex and more reliable. Additionally, the system is now linked to a lightweight and powerful Li-Ion battery which is 1 kg lighter than the previous model. A standard kick starter is fitted as a fail safe. Map select switch The engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to rider preference, conditions and terrain. Further optimisation of the power delivery can be obtained by varying the spring stiffness in the exhaust valve. Large capacity fuel tank Hours of riding are g
2017 Husqvarna TE 300, 2017 Husqvarna® TE 300 LIMITLESS ENDURO There is no wiser choice for serious hard- and extreme-Enduro riders. Built to tackle extraordinary challenges, the 2017 model is completely new and boasts improved performance, reduced weight and smoother power across a wider rev range. Redesigned bodywork and chassis are thinner between the legs, slightly shorter front to back and less tall - keeping the centre of gravity low and centred. This makes movement easier in extreme situations. The new engine design has a laterally-mounted counter balancer shaft to significantly reduce vibrations and offers a smoother and more comfortable ride for even more hours in the saddle. WP's new enduro-specific Xplor forks and shock will make tackling the roughest terrain much easier. Features may include: Engine The 300cc 2-stroke engine sets the benchmark in unrivalled power and lightweight construction. The engine has a completely new construction featuring new shaft arrangements for improved mass centralisation, a new counter balancer shaft reducing vibration, a new twin-valve controlled power valve and re-worked 6-speed enduro gearbox. Counter-balancer The new engine design allows for the implementation of a laterally mounted counter-balancer. The balancer is integrated in a very compact way and significantly reduces vibrations resulting in a smoother and more comfortable ride. Crankcase The lightweight, die-cast engine casings are developed to accommodate new shaft arrangements. The clutch shaft is now 8mm higher while the crankshaft position is 27mm higher centralising oscillating mass and improving ride-ability Carburettor The TE 300 features a 38mm flat slide Mikuni TMX carburettor replacing the previous Keihin model. This new carburettor provides a smooth and controllable power delivery with optimal performance over the entire RPM range. Additionally, the new Mikuni model is less sensitive to changes in temperature and altitude which reduces the need for setting changes in different conditions. Electric and kick start The TE 300 is fitted with a new electric starter located below the engine. This position ensures that the unit is always protected while the new design is less complex and more reliable. Additionally, the system is now linked to a lightweight and powerful Li-Ion battery which is 1 kg lighter than the previous model. A standard kick starter is fitted as a fail safe. Map select switch The engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to rider preference, conditions and terrain. Further optimisation of the power delivery can be obtained by varying the spring stiffness in the exhaust valve. Large capacity fuel tank Hours of riding are g
2017 Husqvarna TE 250, 2017 Husqvarna® TE 250 ENDURO REDEFINED The TE 250 takes the simple, low-maintenance motor concept that is a proven favourite of enduro riders, and progresses it with modern technological advancements. The combination of class-leading power and modern lightweight construction just got massively better for 2017. A new shaft arrangement improves mass centralisation, along with a counter-balancer shaft to reduce vibration. A new 38mm flat-slide MIKUNI TMX carburator is more resistant to altitude and temperature changes, requiring less-frequent adjustment than previous carbs. The new electric starter unit is located within the engine casings, keeping it secure from impacts. It is now linked to a lightweight and powerful Li- Ion battery for reliable starting when you need it most. Features may include: Engine Featuring the very latest in 2-stroke technology, the TE 250 engine has a completely new construction featuring new shaft arrangements for better mass centralisation, a new counter balancer shaft reducing vibration, a new twin-valve controlled power valve and re-worked 6-speed enduro gearbox. Cylinder The 66.4mm bore cylinder features a newly developed power valve system which delivers smooth and controlled power throughout the RPM range. This can be further customised by simply changing between three springs supplied and altering the power delivery for different conditions and rider preference. Counter-balancer The new engine design allows for the implementation of a laterally mounted counter balancer. The balancer is integrated in a very compact way and significantly reduces vibrations resulting in a smoother and more comfortable ride. Crankcase The lightweight, die-cast engine casings are developed to accommodate new shaft arrangements. The clutch shaft is now 8mm higher while the crankshaft position is 27mm higher centralising oscillating mass and improving ride-ability. Functional bodywork Distinctive and futuristic bodywork highlight the impressive leap forward for MY17, while striking pearl blue and electric yellow colours and graphics stylishly adorn the Swedish inspired design. With completely new ergonomics, rider control and comfort are improved allowing the rider to perform at the peak for longer periods of time. The seat has a low profile design with a new high grip seat cover which keeps the rider planted under hard acceleration and in slippery conditions. Map select switch The engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to rider preference, conditions and terrain. Further optimisation of the power delivery can be obtained by varying the spring stiffness in the exhaust valve. Self cleaning footpeg mount The Husqvarn
2017 Husqvarna TE 150, 2017 Husqvarna® TE 150 FEATHERWEIGHT ENDURO With a completely new design and replacing the TE 125, this is the ultimate lightweight enduro bike with a surprisingly powerful engine. New production processes allow thinner casings without compromising strength, while smarter shaft arrangement and a more compact gearbox centralise rotating masses and improve handling. It also results in a smaller, narrower and lower overall engine layout that is also much lighter. An innovative new power-valve design increases power throughout the RPM range.The TE models now all feature electric start. The 2017 2-stroke models all have a light new fuel tank made of translucent plastic for easy fuel level monitoring. Holding an impressive ten litres, the tank has a quick-release fuel cap, perfect for quick refuelling, making sure you cross the finish line ahead of the pack. Features may include: Engine The new engine features an innovative construction featuring the latest in 2-stroke technology. As a result the engine delivers high levels of performance and usability. Additionally, the new engine is designed to improve mass centralisation resulting in better agility and reduced rider fatigue. Cylinder and piston The new cylinder features a 58 mm bore. Combined with an innovative power valve design that increases power throughout the RPM range, the cylinder also features a redesigned water jacket which improves cooling and increases durability. The new piston is designed to perfectly match the new cylinder layout and offer premium reliability. Crankcase High-pressure die cast production processes results in a thin wall thickness and a weight saving of 600g. In order to centralise mass, the new layout features a new shaft arrangement. The clutch shaft is now 27mm higher and the crankshaft 37mm higher reducing the effect of oscillating mass for more precise handling. The historical Husqvarna logo adorns the bronze finished crankcase covers. Carburettor The TE 150 features a 38mm flat slide Mikuni TMX carburettor replacing the previous Keihin model. This new carburettor provides a smooth and controllable power delivery with optimal performance over the entire RPM range. Additionally, the new Mikuni model is less sensitive to changes in temperature and altitude which reduces the need for setting changes in different conditions. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspens
2017 Husqvarna TE 150, 2017 Husqvarna® TE 150 FEATHERWEIGHT ENDURO With a completely new design and replacing the TE 125, this is the ultimate lightweight enduro bike with a surprisingly powerful engine. New production processes allow thinner casings without compromising strength, while smarter shaft arrangement and a more compact gearbox centralise rotating masses and improve handling. It also results in a smaller, narrower and lower overall engine layout that is also much lighter. An innovative new power-valve design increases power throughout the RPM range.The TE models now all feature electric start. The 2017 2-stroke models all have a light new fuel tank made of translucent plastic for easy fuel level monitoring. Holding an impressive ten litres, the tank has a quick-release fuel cap, perfect for quick refuelling, making sure you cross the finish line ahead of the pack. Features may include: Engine The new engine features an innovative construction featuring the latest in 2-stroke technology. As a result the engine delivers high levels of performance and usability. Additionally, the new engine is designed to improve mass centralisation resulting in better agility and reduced rider fatigue. Cylinder and piston The new cylinder features a 58 mm bore. Combined with an innovative power valve design that increases power throughout the RPM range, the cylinder also features a redesigned water jacket which improves cooling and increases durability. The new piston is designed to perfectly match the new cylinder layout and offer premium reliability. Crankcase High-pressure die cast production processes results in a thin wall thickness and a weight saving of 600g. In order to centralise mass, the new layout features a new shaft arrangement. The clutch shaft is now 27mm higher and the crankshaft 37mm higher reducing the effect of oscillating mass for more precise handling. The historical Husqvarna logo adorns the bronze finished crankcase covers. Carburettor The TE 150 features a 38mm flat slide Mikuni TMX carburettor replacing the previous Keihin model. This new carburettor provides a smooth and controllable power delivery with optimal performance over the entire RPM range. Additionally, the new Mikuni model is less sensitive to changes in temperature and altitude which reduces the need for setting changes in different conditions. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspens
2017 Husqvarna TE 250, 2017 Husqvarna® TE 250 ENDURO REDEFINED The TE 250 takes the simple, low-maintenance motor concept that is a proven favourite of enduro riders, and progresses it with modern technological advancements. The combination of class-leading power and modern lightweight construction just got massively better for 2017. A new shaft arrangement improves mass centralisation, along with a counter-balancer shaft to reduce vibration. A new 38mm flat-slide MIKUNI TMX carburator is more resistant to altitude and temperature changes, requiring less-frequent adjustment than previous carbs. The new electric starter unit is located within the engine casings, keeping it secure from impacts. It is now linked to a lightweight and powerful Li- Ion battery for reliable starting when you need it most. Features may include: Engine Featuring the very latest in 2-stroke technology, the TE 250 engine has a completely new construction featuring new shaft arrangements for better mass centralisation, a new counter balancer shaft reducing vibration, a new twin-valve controlled power valve and re-worked 6-speed enduro gearbox. Cylinder The 66.4mm bore cylinder features a newly developed power valve system which delivers smooth and controlled power throughout the RPM range. This can be further customised by simply changing between three springs supplied and altering the power delivery for different conditions and rider preference. Counter-balancer The new engine design allows for the implementation of a laterally mounted counter balancer. The balancer is integrated in a very compact way and significantly reduces vibrations resulting in a smoother and more comfortable ride. Crankcase The lightweight, die-cast engine casings are developed to accommodate new shaft arrangements. The clutch shaft is now 8mm higher while the crankshaft position is 27mm higher centralising oscillating mass and improving ride-ability. Functional bodywork Distinctive and futuristic bodywork highlight the impressive leap forward for MY17, while striking pearl blue and electric yellow colours and graphics stylishly adorn the Swedish inspired design. With completely new ergonomics, rider control and comfort are improved allowing the rider to perform at the peak for longer periods of time. The seat has a low profile design with a new high grip seat cover which keeps the rider planted under hard acceleration and in slippery conditions. Map select switch The engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to rider preference, conditions and terrain. Further optimisation of the power delivery can be obtained by varying the spring stiffness in the exhaust valve. Self cleaning footpeg mount The Husqvarn
2016 Husqvarna TE 300, 2016 Husqvarna® TE 300 EXTREME ENDURO PERFORMANCE TO TAKE ON ANY TERRAIN The 300 cc engine puts out 54 hp, and with an overall weight of just 104.6 kg without fuel, the TE 300 combines extreme performance and solid reliability, with typically low 2-stroke maintenance costs. The astonishing performance potential is easily accessible thanks to the updated forks, modified front-end geometry and revised shock setup. The power is confidently controlled through the new Brembo hydraulic clutch and smooth 6-speed gearbox. Premium components and equipment include electric and kick start, standard handlebar map switch, Brembo brake calipers and the largest capacity fuel tank in the competition enduro segment. Features May Include: ENGINE With a 54 hp power output, the TE 300 is the most powerful 2-stroke engine available today. The engine features a sophisticated exhaust valve that optimises power delivery and, combined with the Boyesen reed valve, offers excellent response and durability. STANDARD MAP SWITCH The engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to rider preference, conditions and terrain. Further optimisation of the power delivery can be obtained by varying the spring stiffness in the exhaust valve. NEW BREMBO HYDRAULIC CLUTCH The TE 300 now features a new Brembo hydraulic clutch system. The high quality clutch system guarantees perfect modulation of the clutch in every condition. This means that the play is constantly compensated so that the pressure point and the function of the clutch remain identical in cold or hot conditions and over time. The Brembo clutch also features even wear characteristics and is nearly maintenance-free. ELECTRIC AND KICK START Standard electric start ensures effortless and reliable starting that is especially useful in difficult terrain. The TE 250 and TE 300 2-strokes have both an electric and a kick starter as standard. PERFECT ERGONOMICS Ergonomics play a major role in rider feeling and confidence, so the handlebar can be adjusted in 4 different positions to adapt to a wide variety of riders. The stylish and modern bodywork has been designed for a perfect fit of man and machine, allowing for total control in all conditions for the most diverse body sizes. The new seat cover is highly resistant and greatly improves grip compared to the previous material. The colour is now a deep blue that integrates perfectly with the new colour of the bodywork. NEW FRONT AXLE AND FORK SHOES Detail improvements and optimisation on the MY16 enduro bikes are based on the updated front end where a new 22 mm front axle with specific fork shoes replaces the previous 26 mm axle. The new axle is lighter, and the shoes have shorter offset and increased trail, for more stability and better front-e
