Husqvarna Fc motorcycles for sale

1-15 of 852

Sort By

2017 Husqvarna FC 350

2017 Husqvarna FC 350

$9,299

Woodstock, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category Dirt Bikes

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, This 2017 Husqvarna FC 350 FC 350 features a 350cc cyl engine. The vehicle is Other with a Other interior. It is offered As-Is, extended warranty is available. - 2017 HUSQVARNA FC 350 - This Husqvarna is in Excellent overall exterior condition - ABS, 2017 Husqvarnar FC 350POWER AND CONTROLThe FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, high performance package.Features may include:EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13, 400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.Functional bodyworkModern and functional bodywork with traditional Husqvarna blue and yellow accents mark a simplistic yet stylish Swedish design. The ergonomics have been specifically tailored to deliver high levels of comfort and control, ergonomics and packaging. With carefully calculated tortional and longitudinal flex, the frame works in harmony with the suspension to offer sharp handling and superior comfort. These characteristics, matched to a lightweight and compact engine design, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is 30% carbon fibre and the overall 3-piece construction is remarkably light but also very strong for an overall weight of 1.4 kg. Additionally, a specific rigidity has been calculated in the component for optimal handling and rider ergonomics.SwingarmThe hollow, cast aluminium swingarm is designed to offer optimal stiffness and reliability. The machining on the side by Husqvarna Motorcycle engineers is another

2017 Husqvarna FC 350

2017 Husqvarna FC 350

$9,299

Woodstock, Illinois

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, This 2017 Husqvarna FC 350 FC 350 features a 350cc cyl engine. The vehicle is Other with a Other interior. It is offered As-Is, extended warranty is available. - 2017 HUSQVARNA FC 350 - This Husqvarna is in Excellent overall exterior condition - ABS, 2017 Husqvarnar FC 350POWER AND CONTROLThe FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, high performance package.Features may include:EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13, 400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.Functional bodyworkModern and functional bodywork with traditional Husqvarna blue and yellow accents mark a simplistic yet stylish Swedish design. The ergonomics have been specifically tailored to deliver high levels of comfort and control, ergonomics and packaging. With carefully calculated tortional and longitudinal flex, the frame works in harmony with the suspension to offer sharp handling and superior comfort. These characteristics, matched to a lightweight and compact engine design, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is 30% carbon fibre and the overall 3-piece construction is remarkably light but also very strong for an overall weight of 1.4 kg. Additionally, a specific rigidity has been calculated in the component for optimal handling and rider ergonomics.SwingarmThe hollow, cast aluminium swingarm is designed to offer optimal stiffness and reliability. The machining on the side by Husqvarna Motorcycle engineers is another

2016 Husqvarna FC 450

2016 Husqvarna FC 450

$9,399

Wantage, NJ

Year 2016

Make Husqvarna

Model FC 450

Category -

Engine -

Posted Over 1 Month

Price shown is based on the manufacturer's suggested retail price (MSRP) and is subject to change. MSRP excludes destination charges, optional accessories, applicable taxes, installation, setup and/or other dealer fees.

2016 Husqvarna FC 350

2016 Husqvarna FC 350

$9,199

Wantage, NJ

Year 2016

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

The FC 350 shares much of its engine architecture with the smaller FC 250, therefore combining compact dimensions, light weight and 450-rivalling power. All the packaging benefits of the new DOHC engine are matched to the most advanced electronics. Standard launch control, switchable engine maps and a faster, more powerful engine management system, guarantee that all the 58 horsepower is put to the ground in total control.

2015 Husqvarna FC 250

2015 Husqvarna FC 250

$4,999

Bremerton, Washington

Year 2015

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FC 250, 2015 Husqvarna® FC 250 HIGH TECH RACE WEAPON An exhilarating, high-revving power delivery and a lightweight and agile chassis, make the FC 250 a true contender in 250 4-stroke racing at all levels worldwide. The 14,000 RPM rev limit and peak power at well over 40 horsepower are benchmark performance figures. High quality standard equipment includes electric start, a hydraulic clutch, Brembo brakes and a handlebar-mounted map switch. Features May Include: ENGINE MANAGEMENT SYSTEMThe electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power.ENGINETechnologically advanced solutions in engine layout and components ensure explosive engine performance. The lightweight and compact DOHC 4-stroke engine has been designed to offer top performance without compromise. The large titanium valves (32.5mm intake and 26.5mm exhaust) weigh only 19.6g each on the intake side and 18g on the exhaust side.CRANKSHAFT, CONROD AND PISTONThe high revving 250cc engine demands high-tech and reliable engine components. The crankshaft features a plain big end bearing and force-fitted bearing shells, ensuring durability and long service intervals. The conrod and crankshaft are produced by industry leader Pankl to exacting standards. The piston is produced by König and has been designed for minimum weight to suit the high-revving, high output nature of the FC 250. The forged box-type piston weighs only 200g and combines high performance and reliability, and guarantees a compression ratio of 13.9:1 for maximum power output.FRAMEThe engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal feedback and complete confidence in every situation. This was achieved by designing the lightweight chromium molybdenum frame with precise longitudinal flex that helps absorb impacts from the rear wheel, working together with the suspension for better comfort and greater feedback. The torsional rigidity enhances turn-in, sharp handling and stability even on the roughest terrain, giving the rider complete confidence in finding his lines and increasing his pace lap after lap.SUBFRAMEThe lightweight polyamide rear subframe has been reinforced with an additional screw on the airbox side that improves the fitment between the left subframe arm and the airbox. The improved seal guarantees better performance and durability. The three-piece composite subframe, made of high strength polyamide with a precision injectio

2017 Husqvarna FC 250

2017 Husqvarna FC 250

$8,599

Evansville, Indiana

Year 2017

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 250, 2017 Husqvarna® FC 250 RAZOR-SHARP AGILITY The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed. Features may include: EngineAll major components and shaft arrangements have been carefully designed and placed in specific positions that best suit the performance and handling characteristics of the FC 250. The 250 cc engine is not only light at 26.1 kg but also remarkably powerful with an overall power output of 46 hp at the output shaft. One way in which this was achieved was by engineering key components to produce the least amount of friction possible, reducing drag as a result.DOHC cylinder headThe DOHC cylinder head features finger followers with a DLC (diamond like carbon) coating resulting in minimal friction and optimal performance. These actuate large titanium valves (32.5 mm intake, 26.5 mm exhaust) which at the 14,000 rpm rev-limit open and close multiple times each second introducing fuel/air mixture to the carefully designed combustion chamber delivering efficient and optimal power throughout the rev-range. The cylinder head is now fixed to the frame using lightweight aluminium brackets saving 114 grams while keeping the same structural integrity.CrankcasesThe aluminium crankcases have been designed to house the internal components of the engine in the perfect position to achieve the ideal centre of gravity. The lightweight casings are manufactured using a high-pressure die cast production process, resulting in thin wall thickness while retaining exceptional reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers.Exhaust systemThe FC 250 exhaust system has been expertly designed to deliver the best possible performance while adhering to the FIM noise limits. The header pipe features a resonance chambers for optimal performance while the silencer is crafted from lightweight and strong aluminium.Magura hydraulic clutchThe FC 250 features a Magura hydraulic clutch system. The high quality German-made clutch system guarantees even wear, almost maintenance-free operation and perfect modulation in every condition. This means that play is constantly compensated so that the pressure point and function of the clutch remain identical in cold or hot conditions, as well as over time.CSS clutchThe 250 cc and 350 cc engines feature a CSS (coil spring steel) clutch with Magura hydraulics and lever. The CSS clu

2015 Husqvarna FC 450

2015 Husqvarna FC 450

$6,000

Indio, California

Year 2015

Make Husqvarna

Model FC 450

Category -

Engine -

Posted Over 1 Month

This bike Sr owned 4hrs on it, never used factory plastic included. Completely redone Noleen suspension. great bike. have bills pending.Oragon registered next 3 years

2017 Husqvarna FC350

2017 Husqvarna FC350

$9,299

Waynesboro, Virginia

Year 2017

Make Husqvarna

Model FC350

Category -

Engine -

Posted Over 1 Month

2017 HUSQVARNA FC350,

2015 Husqvarna FC 350

2015 Husqvarna FC 350

$7,200

Cold Spring, Minnesota

Year 2015

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

Only ONE ride. Bought brand new last fall but decided at 62 to get a dual sport Husky. Stored properly and ready to ride. Fantastic bike! More power than a 250, but lighter than a 450. I have tool kit and clean title in hand. Call or text only. six61644817five. No Trades. Cash only. Located near St. Cloud.  Thanks for looking.

2017 Husqvarna FC 350

2017 Husqvarna FC 350

$9,299

Evansville, Indiana

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.New map switchThe FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction.Engine management systemThe Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear.44 mm throttle bodyThe FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle respon

2017 Husqvarna FC 250

2017 Husqvarna FC 250

$7,999

Greenwood Village, Colorado

Year 2017

Make Husqvarna

Model FC 250

Category -

Engine 249.9 cc cc

Posted Over 1 Month

The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed.

2017 Husqvarna FC 250

2017 Husqvarna FC 250

Request Price

Waterford, Connecticut

Year 2017

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 250,

2017 Husqvarna FC250

2017 Husqvarna FC250

$8,599

Waynesboro, Virginia

Year 2017

Make Husqvarna

Model FC250

Category -

Engine -

Posted Over 1 Month

2017 HUSQVARNA FC250,

2017 Husqvarna FC450

2017 Husqvarna FC450

$9,499

Waynesboro, Virginia

Year 2017

Make Husqvarna

Model FC450

Category -

Engine -

Posted Over 1 Month

2017 HUSQVARNA FC450,

2015 Husqvarna FC 250

2015 Husqvarna FC 250

$8,149

Gresham, Oregon

Year 2015

Make Husqvarna

Model FC 250

Category -

Engine 249.91 cm³ cc

Posted Over 1 Month

High Tech Race WeaponAn exhilarating, high-revving power delivery and a lightweight and agile chassis, make the FC 250 a true contender in 250 4-stroke racing at all levels worldwide. The 14,000 rpm rev limit and peak power at well over 40 horsepower are benchmark performance figures. High quality standard equipment includes electric start, a hydraulic clutch, Brembo brakes and a handlebar-mounted map switch.