1993 Yamaha Venture Motorcycles for sale

1993 Yamaha VENTURE ROYAL

$2,100

Davie, Florida

The drive package on the Venture Royale includes a liquid-cooled V-4 engine. It has four valves per cylinder, overhead camshafts with shim over bucket valve adjustment. The five speed transmission is integral with the engine case. The engine and transmission share lubricating oil. The drive shaft and final drive assembly are built into the left side of the double sided swing arm. Swing arm motion is damped by an air preloaded monoshock mounted in the center of the frame. The clutch is of the wet plate design and is hydraulically activated by the left hand lever.[

2011 Suzuki Boulevard S40

$2,200

East Brady, Pennsylvania

includes cargo trailer , bike cover, seat cover new windshield , new rear tire 93000 miles

Yamaha : Other 1993 yamaha venture royale 1300 cc

$1,900

Willow Springs, North Carolina

Great commuter bike 45mpg, runs good. I ride it at least once a week. It has am/fm/cassette, CB , onboard compressor. The bike has a new tire on rear. The fork seals need to be replaced and hydraulic clutch has a small leak somewhere. 92k $1900 919-218-9818

1983 Yamaha XVG1200 Venture

Request Price

Francis Creek, Wisconsin

The Yamaha Venture is a touring motorcycle produced from 1983 to 1993 and from 1999 to 2009. The 1983 Yamaha Venture, also known as the 1983 Venture Royale, was the first first liquid-cooled, four stroke, V-4 Yamaha motorcycle. The bike was comfortable -- it came with an adjustable air suspension and its seat was orthopedically designed to deliver maximum comfort. In addition, the motorcycle was equipped with a stereo radio.Engine and TransmissionThe 1983 Yamaha Venture comes with a powerful 1198cc, or 73.1-cubic-inch, 90 horsepower engine. The engine has a 76.0mm bore and a 66mm stroke. Its compression ratio is 10.5:1. The engine is equipped with a Mikuni 34mm constant-vacuum carburetor. The bike has a battery-powered, inductive, magnetically triggered ignition. The 1983 Yamaha Venture has a five-speed transmission.ChassisThe motorcycle has a double-downtube, full-cradle frame. It comes with a center-axle, air-adjustable fork front suspension with 40mm tubes, anti-dive valving and a 5.1-inch, or 130mm, wheel travel. The rear suspension is adjustable for rebound dampening, and has an air-adjustable shock absorber and has 4.2 inches, or 107mm, of rear-wheel travel. The 1983 Yamaha Venture is equipped with hydraulic dual-disc front brakes with dual-piston calipers, and single-disc rear brakes with dual-piston calipers. The bike has a cast 2.15 x 18 front wheel and a cast 3.00 x 16 rear wheel.Other SpecificationsThe 1983 Yamaha Venture's wheelbase is 63.4 inches. The seat is 31.2 inches high. The ground clearance measures 5.6 inches. The 1983 Yamaha Venture is equipped with a 20-liter, or 5.3-gallon, fuel tank. The motorcycle weighs 911.5 pounds. The bike has high- and low-headlight beams of 65 and 60 watts. The motorcycle comes with a speedometer, an odometer, a tripmeter and a tachometer.

1983 Yamaha XVG1200 Venture

Request Price

Francis Creek, Wisconsin

1983 Yamaha XVG1200 Venture, 1200cc V-4 Yamaha power! - The Yamaha Venture is a touring motorcycle produced from 1983 to 1993 and from 1999 to 2009. The 1983 Yamaha Venture, also known as the 1983 Venture Royale, was the first first liquid-cooled, four stroke, V-4 Yamaha motorcycle. The bike was comfortable -- it came with an adjustable air suspension and its seat was orthopedically designed to deliver maximum comfort. In addition, the motorcycle was equipped with a stereo radio. Engine and Transmission The 1983 Yamaha Venture comes with a powerful 1198cc, or 73.1-cubic-inch, 90 horsepower engine. The engine has a 76.0mm bore and a 66mm stroke. Its compression ratio is 10.5:1. The engine is equipped with a Mikuni 34mm constant-vacuum carburetor. The bike has a battery-powered, inductive, magnetically triggered ignition. The 1983 Yamaha Venture has a five-speed transmission. Chassis The motorcycle has a double-downtube, full-cradle frame. It comes with a center-axle, air-adjustable fork front suspension with 40mm tubes, anti-dive valving and a 5.1-inch, or 130mm, wheel travel. The rear suspension is adjustable for rebound dampening, and has an air-adjustable shock absorber and has 4.2 inches, or 107mm, of rear-wheel travel. The 1983 Yamaha Venture is equipped with hydraulic dual-disc front brakes with dual-piston calipers, and single-disc rear brakes with dual-piston calipers. The bike has a cast 2.15 x 18 front wheel and a cast 3.00 x 16 rear wheel. Other Specifications The 1983 Yamaha Venture's wheelbase is 63.4 inches. The seat is 31.2 inches high. The ground clearance measures 5.6 inches. The 1983 Yamaha Venture is equipped with a 20-liter, or 5.3-gallon, fuel tank. The motorcycle weighs 911.5 pounds. The bike has high- and low-headlight beams of 65 and 60 watts. The motorcycle comes with a speedometer, an odometer, a tripmeter and a tachometer.

1993 Yamaha XVZ1300

$5,000

Colorado Springs, Colorado

1993 Venture Royal 1300cc two tone blue. Lot of chrome and lights, new tires, new battery, new windshield and back rest and passenger arm rest, 8 disc CD changer hooked to stereo system (Sony) and factory service manual and full bike cover. For an extra charge there is two full face helmets with J&M head sets and two open face helmets with J&M head sets, two like new leather jackets and chaps. Comes with matching trailer and lots of extra parts some still in original package. This was the last year this bike was made has 56000 miles and in great condition.

2016 United Trailers XLMTV-7X16TA

Request Price

Francis Creek, Wisconsin

The Yamaha Venture is a touring motorcycle produced from 1983 to 1993 and from 1999 to 2009. The 1983 Yamaha Venture, also known as the 1983 Venture Royale, was the first first liquid-cooled, four stroke, V-4 Yamaha motorcycle. The bike was comfortable -- it came with an adjustable air suspension and its seat was orthopedically designed to deliver maximum comfort. In addition, the motorcycle was equipped with a stereo radio.Engine and TransmissionThe 1983 Yamaha Venture comes with a powerful 1198cc, or 73.1-cubic-inch, 90 horsepower engine. The engine has a 76.0mm bore and a 66mm stroke. Its compression ratio is 10.5:1. The engine is equipped with a Mikuni 34mm constant-vacuum carburetor. The bike has a battery-powered, inductive, magnetically triggered ignition. The 1983 Yamaha Venture has a five-speed transmission.ChassisThe motorcycle has a double-downtube, full-cradle frame. It comes with a center-axle, air-adjustable fork front suspension with 40mm tubes, anti-dive valving and a 5.1-inch, or 130mm, wheel travel. The rear suspension is adjustable for rebound dampening, and has an air-adjustable shock absorber and has 4.2 inches, or 107mm, of rear-wheel travel. The 1983 Yamaha Venture is equipped with hydraulic dual-disc front brakes with dual-piston calipers, and single-disc rear brakes with dual-piston calipers. The bike has a cast 2.15 x 18 front wheel and a cast 3.00 x 16 rear wheel.Other SpecificationsThe 1983 Yamaha Venture's wheelbase is 63.4 inches. The seat is 31.2 inches high. The ground clearance measures 5.6 inches. The 1983 Yamaha Venture is equipped with a 20-liter, or 5.3-gallon, fuel tank. The motorcycle weighs 911.5 pounds. The bike has high- and low-headlight beams of 65 and 60 watts. The motorcycle comes with a speedometer, an odometer, a tripmeter and a tachometer.

1989 Yamaha XVZ13 VENTURE ROYALE MK2

$2,495

Rock Falls, Illinois

1989 Yamaha XVZ13 VENTURE ROYALE MK2, INEXPENSIVE, COMFORTABLE AND FAST! - The 1,198 cc (73.1 cu in) V4 engine from the Mk1 Venture was modified for performance and was used as the engine in the Yamaha V-Max. Many of these changes were incorporated into the Mk2 version of the Venture. Mechanical[edit] The Mk2 was produced from 1986 through 1993 and had a 1,298 cc (79.2 cu in) (referred to as 1,300 cc) engine with the trunk and side bags rigidly mounted. a full frame mounted fairing with a AM/FM cassette stereo, an air suspension control system with onboard compressor, and electronic cruise control. A CB radio was an option. The drive package on the Venture Royale includes a liquid cooled V-4 engine. It has four valves per cylinder, overhead camshafts, and shim over bucket valves. The five speed transmission is part of the engine case and both the engine and transmission share oil. The drive shaft and final drive assembly are built into the left side of the double sided swing arm. Swing arm motion is damped by an air preloaded monoshock mounted in the center of the frame. The clutch is of the wet plate design and is hydraulically activated.

1989 Yamaha XVZ13 VENTURE ROYALE MK2

$2,495

Rock Falls, Illinois

1989 Yamaha XVZ13 VENTURE ROYALE MK2, INEXPENSIVE, COMFORTABLE AND FAST! - The 1,198 cc (73.1 cu in) V4 engine from the Mk1 Venture was modified for performance and was used as the engine in the Yamaha V-Max. Many of these changes were incorporated into the Mk2 version of the Venture. Mechanical[edit] The Mk2 was produced from 1986 through 1993 and had a 1,298 cc (79.2 cu in) (referred to as 1,300 cc) engine with the trunk and side bags rigidly mounted. a full frame mounted fairing with a AM/FM cassette stereo, an air suspension control system with onboard compressor, and electronic cruise control. A CB radio was an option. The drive package on the Venture Royale includes a liquid cooled V-4 engine. It has four valves per cylinder, overhead camshafts, and shim over bucket valves. The five speed transmission is part of the engine case and both the engine and transmission share oil. The drive shaft and final drive assembly are built into the left side of the double sided swing arm. Swing arm motion is damped by an air preloaded monoshock mounted in the center of the frame. The clutch is of the wet plate design and is hydraulically activated.

Yamaha : XS 1979 yamaha xs 1100 special engine motor vintage antique

$250

Omaha, Nebraska

Working engine pulled from bike, all wires are in in working order, clutch cable was cut (will need to be replaced) all gears work and gearbox is in working order.The engine has no internal or external damage, just needs cleaning up. ENGINE PART COMPATIBILITY:Cam Chain Fits: TX/XS650's 1974-84 (36 tooth cam). SR500 E/F/G/H 78-81, XT500 C/D/E/F/G/H Dual Sport 76-81 Clutch Master Cylinder Rebuild Kit 1983 Yamaha XVZ1200 Venture1983 Yamaha XVZ1200 Venture Royale1984 Yamaha XVZ1200 Venture1984 Yamaha XVZ1200 Venture Royale1985 Yamaha FZ7501985 Yamaha VMX1200 V-Max1985 Yamaha XVZ1200 Venture1985 Yamaha XVZ1200 Venture Royale1986 Yamaha FJ12001986 Yamaha FZ7501986 Yamaha FZX700 Fazer1986 Yamaha VMX1200 V-Max1986 Yamaha XVZ1300 Venture1986 Yamaha XVZ1300 Venture Royale1987 Yamaha FJ12001987 Yamaha FZ7001987 Yamaha FZR10001987 Yamaha FZR750 R1987 Yamaha FZX700 Fazer1987 Yamaha VMX1200 V-Max1987 Yamaha XVZ1300 Venture1987 Yamaha XVZ1300 Venture Royale1988 Yamaha FJ12001988 Yamaha FZ7501988 Yamaha FZR10001988 Yamaha FZR750 R1988 Yamaha VMX1200 V-Max1988 Yamaha XVZ1300 Venture1988 Yamaha XVZ1300 Venture Royale1989 Yamaha FJ12001989 Yamaha VMX1200 V-Max1989 Yamaha XVZ1300 Venture Royale1990 Yamaha FJ12001990 Yamaha VMX1200 V-Max1990 Yamaha XVZ1300 Venture Royale1991 Yamaha FJ12001991 Yamaha VMX1200 V-Max1991 Yamaha XVZ1300 Venture Royale1992 Yamaha FJ12001992 Yamaha VMX1200 V-Max1992 Yamaha XVZ1300 Venture Royale1993 Yamaha FJ12001993 Yamaha VMX1200 V-Max1993 Yamaha XVZ1300 Venture Royale1994 Yamaha VMX1200 V-Max1995 Yamaha VMX1200 V-Max1996 Yamaha VMX1200 V-Max1997 Yamaha VMX1200 V-Max1998 Yamaha VMX1200 V-Max1999 Yamaha VMX1200 V-Max2000 Yamaha VMX1200 V-Max2001 Yamaha VMX1200 V-Max2002 Yamaha VMX1200 V-Max2003 Yamaha VMX1200 V-Max2004 Yamaha VMX1200 V-Max2005 Yamaha VMX1200 V-Max2006 Yamaha VMX1200 V-Max2007 Yamaha VMX1200 V-Max Clutch Friction PlatesClutch Friction Plates - Fit: 650's 1970-84 - Order number of pieces required. 1980-84 models - use 6pc. 1974-79 models - use 7pc.. 1970-73 model clutch friction plates are No longer available but these later types can replace the originals! (6 friction and 5 steel drive plates were originally used). To use these late type friction plates remove the old clutch plate separator O-Rings (discard), and add 1 additional steel drive plate and replace all 6 old type thick friction plates with 7pc. of this new type friction plate. 1982-83 XS400. Use 5 pc. OEM Reference #• 341-16321-09-00• 341-16321-09-00 High Performance Clutch Friction Plates - Fit: All 650's 1970-84Sold Each - Order number of pieces required. 1980-84 models - use 6pc.1974-79 models - use 7pc..1970-73 model clutch friction plates are No longer available but these latertypes can replace the originals! (6 friction and 5 steel drive plates were originallyused). To use these late type friction plates remove the old clutch plateseparator O-Rings (discard), and add 1 additional steel drive plate and replaceall 6 old type thick friction plates with 7pc. of this new type friction plate.1982-83 XS400 use 5 pc. Suzuki GS1000SYamaha XJ1100 Clutch SpringsHigh Performance Clutch Springs - Set of 6 - Fits: All 650's - Made in Japan.Replaces/upgrades sagged original stock springs. Also fits: XT600 Z '90, XS750 77-80, XS1100 '80. Fits the following only using 5 of the 6 springs: XT550 82, SRX600 86, XT600Z 86-88, XT600E 90-92, XTZ660 92-93, SZR660 95-97. Oil FilterOEM #: 10-28401, 1L9-13440-9184-85 FJ600, 86-88 FZ600, 88-91 FZR400 Genesis, 88-99 FZR400/600, 81-83 ZJ550 All, 84-92 XJ600, 80-83 XJ650 Maxim, 82-83 XJ650 Turbo, 81-82 XJ650L/R, 85-86 XJ700 Maxim, 81-83 XJ750 All, 83 XJ900R Seca, 78-82 XS250, 76-77 XS360, 82-83 XS400/R DOHC, 77-83 XS400/S SOHC Stator XS/VX650 and many more parts. Shipping is FREE. Have any questions? please send me a message

Trim special