2017 KTM 250 SX-F Factory Edition, 2017'S NOW IN STOCK. 2017 KTM 450 SX-F Factory Edition THE WHIP The 250 SX-F Factory Edition, the lightest and best performing bike in its class, is the right choice for both amateur and professional riders. The combination of a powerful and torquey engine in a lightweight and agile chassis is key to its success. A 14.000 rpm redline, factory spec WP AER 48 forks, orange anodized triple clamps and sprocket, an FMF muffler, launch control and Excel rims: this small bore superstar based on the prestigious 250 SX-F has what it takes to take on the big guns. And take them out. Features may include: ENGINEThe new 250 SX-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 1,1 kg, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 SX-F a winner for both amateur and professional riders.ELECTRIC STARTERThe new 250 SX-F is fitted with an electric starter as standard, which a clear advantage in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight-reduced starter drive guarantees more efficient and reliable starting.TRANSMISSIONThe new engine is fitted with an all-new and weight reduced, 5-speed gearbox. It features the same gear ratios as the previous model, but has wider gears that feature a special surface treatment on the 2nd, 3rd and 4th gears for improved reliability. One of the new and special features on the bike is an advanced "NO-DIRT" shift lever design, which prevents dirt from blocking the joint of the lever and guarantees safe shifting of the transmission.ENGINE MANAGEMENT SYSTEMThe completely reworked Keihin Engine Management System, with electronic fuel injection, features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with different maps according to the gear sensor selection. In addition, the rider can activate optional maps for a different power delivery via the map select switch on the handlebar.CRANKSHAFTThe new 250 SX-F's crankshaft features a stiffer design and employs a 6 mm shorter connecting rod, contributing to the compact and light engine with a snappy power delivery. A plain big end bearing features two force-fitted bearing shells run directly on the crank pin. This design is a major prerequisite for the ex
2017 KTM 450 SX-F Factory Edition, IN STOCK. 2017 KTM 450 SX-F Factory Edition WE DON'T JUST BUILD REPLICAS We build Factory Editions. Championship winning bikes, like this one. Thanks to its compact SOHC (single overhead camshaft) engine delivering explosive but controllable power, it is the weapon of choice for our Factory Teams around the world. Experts will notice its revolutionary WP AER 48 forks, the anodized triple clamps and sprocket, its upgraded Akrapovic muffler, the orange frame or the D.I.D DirtStar rims. The rest will only see a blur blasting past. Is it Ryan Dungey? Possibly. Or it could be you. Features may include: ENGINEWith new features such as more compact dimensions, stronger performance throughout the rev range and a weight reduction of 1,8 kg, this newly developed powerplant is the lightest 450 engine on the off-road market. With a reworked single overhead camshaft cylinder head and the latest electronic fuel injection, the 450 SX-F has unrivalled power of more than 62 hp and a highly efficient power delivery.ELECTRIC STARTERLike all KTM 4-Stroke motorcycles, the 450 SX-F is started with ease by pushing a button. Demonstrated time and time again, an electric starter can become an invaluable advantage in the heat of competition.CLUTCHThe 450 SX-F employs the KTM-developed DDS clutch (Damped Diaphragm Steel) with a wear-free steel basket and extremely heat resistant clutch plates. This design is distinguished by employing a diaphragm spring instead of coil springs, which makes for a considerably easier clutch action. The diaphragm spring also leaves sufficient space for a damping system integrated into the clutch hub, which benefits for both traction and durability.ENGINE MANAGEMENT SYSTEMThe completely reworked Keihin Engine Management System, with electronic fuel injection, features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with different maps according to the gear sensor selection. In addition, the rider can activate optional maps for a different power delivery via the map select switch on the handlebar.TRANSMISSIONThe new engine of the 450 SX-F uses a lightweight 5-speed gearbox which perfectly matches to the power delivery of the large displacement engine. In addition the 1st and 3rd gears are treated with a special surface treatment for better reliability. WHEELSCNC machined hubs and high-end D.I.D. DirtStar ?wheels rims are fitted with Dunlop GEOMAX MX32 tires as standard. These latest MX tires from Dunlop have been developed by KTM factory racing in the USA, with full factory testing and expert rider feedback in racing. They guarantee fl
2015 KTM 85 SX 17/14, Priced to go! Clean 85 SX is ready to race. Six speed transmission. Very fast and competitive. 4/4/2017 2015 KTM 85 SX 17/14 THE LITTLE BIG ONE. This is where future champions fight for victory, whether it be at Loretta Lynns or a regional championship, the 85 SX is regarded as a winning bike in this scene. With the most powerful engine in the field and an ultra-light, sturdy chassis, it has nothing to fear from any full-size bike. Features May Include: FrameThe frame made of high quality, chrome-molybdenum steel with a lightweight aluminium rear end guarantees maximum stability at a minimum weight. Its hardwearing powdercoating is still in a classy anthracite metallic.GraphicsThe revamped, cool graphic design provides the bike with a striking new appearance.BodyworkThe bodywork is designed ergonomically and functionally in such a way that the motorcycle is in perfect harmony with the rider.HandlebarThe 85 SX is equipped with an extremely sturdy, tapered Renthal handlebar made from high-grade aluminium alloy, which features an offset specially designed to meet the demands of motocross.ChasisThe proven 43 mm upside-down fork with 270 mm of suspension travel and the PDS shock absorber ensure optimum traction and suspension comfort on the KTM 85 SX. Rebound and compression damping can be adapted individually to track and rider in no time at all.SwingarmAs before, the newly developed swingarm is manufactured from lightweight aluminium in the form of a single casting. The very latest calculation methods have allowed weight to be reduced by 500 grams. Furthermore, newly designed chain links and brake-hose brackets plus the proven chainguide from the full-size SX models have been employed.EngineState-of-the-art 2-stroke technology in conjunction with a precise 6-speed transmission and a hydraulic clutch provide the basis for the superiority of the 85 SX in all junior race series.CylindersThe compact cylinder with 47 mm bore ensures that the 85 SX achieves peerless performance thanks to the ports dimensioned for optimum gas flow and the centrifugally-controlled exhaust valve. A reworked rear transfer port guarantees even better durability.ClutchThe 85 SX engine is equipped with a modern, hydraulic clutch actuation system from FORMULA, which guarantees smooth and very precise clutch control.WheelsThe wheels are fitted with lightweight, CNC-machined hubs and high-end Excel rims, plus black-coated spokes with lightweight aluminium nipples, guaranteeing highest levels of stability while keeping weight to a minimum. The 85 SX is now equipped with the very latest generation tire from MAXXIS, featuring a profile that gives optimum grip on e
2015 KTM 250 SX-F Factory Edition, Like new with 2.7 Hours 2015 KTM 250 SX-F THE ULTIMATE WINNING BIKE The 250 SX-F has been an established force in the MX2 World Championship for years now. In addition to the world title, it also won the prestigious AMA Supercoss Lite Championship in 2013 & 2014. All over the world, in both professional and amateur classes, the 2014 motorsport season was very successful for the 250 SX-F - and the 2015 season promises to be no different. In MY 2015, the feisty 4-stroke hits the scene with further improvements to engine and chassis a performance package that will continue to dominate the MX2 class. Features May Include: BodyworkKTM engineers have focussed on designing the bodywork ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail. The front fender is a perfect example of how moulded plastic components can gain maximum stability with a well thought out structure and well-conceived attachment.SeatThe ergonomically perfectly designed seat is equipped with a durable foam core, ensuring both adequate comfort and high stability.AirboxAt the same time, the design of the airbox provides optimum protection of the air filter from dirt plus maximum air throughput for the highest performance. Quick replacement of the twin-air filter - without tools and in a matter of seconds - has long since been an unrivalled KTM standard.Fuela TankAll models in the SX range are equipped with a 7.5 litre, lightweight polyethylene fuel tank. The fuel pump system used on the 4-stroke motocross models is the same as that used on the 4-stroke enduro models, thereby allowing optional fitting of larger tanks from the PowerParts range or from the enduro models.HandlebarAll SX models are equipped with the extremely sturdy, tapered Renthal Fatbar 827 handlebar that features an offset specially designed to meet the demands of motocross. In accordance with the proven KTM standard, the handlebar can be fixed in a choice of four positions. For MY 2015, it is equipped with softer two-component grips to spare the rider's hands.WheelsThe wheels fitted for MY 2015 feature black coated, high-end Excel rims with lightweight, CNC-machined hubs and spokes with lightweight aluminium nipples, allowing highest levels of stability to be achieved, while keeping weight to a minimum. New Dunlop Geomax MX 52 tires were developed in collaboration with the Red Bull/ KTM USA Factory Racing Team and offer perfect traction with top performance. The new rear sprockets save 50 grams in unsprung mass.BrakesHigh-tech brakes from Brembo have always been standard equipment on KTM offroad bikes and, together with the lightweight wave brake discs, they are the mea
2016 KTM 450 SX-F, 2016 KTM 450 SX-F Holeshot Bragging Rights If maximum power is required, there is no other way but the 450 SX-F. This model has proven itself in the main championships around the world over the years. Thanks to its compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power, it is the weapon of choice for the US KTM Factory Team and Ryan Dungey winning the AMA Supercross championship 2015. Features May Include: FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling and last but not least it´s around 380 g lighter than the previous model. SWINGARM As on the predecessor models, the new SX generation features a reworked cast aluminium swingarm. The updated design offers reduced weight and an optimized flex behavior supporting the frame and suspension created with a single-component casting process. The weight reduction is 250 grams. MONOSHOCK The new generation of monoshock made by WP Suspension has been developed for the new SX models in conjunction with the new frame and swingarm architecture, including the reworked linkage system and the new WP forks. The linkage system has also been reworked with a revised geometry and longer pull rods, which was tested last season in most of the KTM factory bikes. FORKS The KTM SX models are fitted with a revolutionary new and super-lightweight WP fork, a 48 mm USD air-sprung fork developed by WP Suspension in close collaboration with KTM. It is a split fork with separate functions for each fork leg. The damping functions are on the right side, whereas the air spring is in the left. The left leg features a capsuled air cartridge. This air spring is easy to adjust to any rider weight via a single air valve and a standard fork air pump. The right fork leg integrates a completely new damping cartridge to fit single damping leg requirements, and the damping can be adjusted to the track conditions or the rider s preferences with a twist of a dial. The new fork with approximately 300 mm travel has outstanding response and excellent, very consistent damping characteristics, while also with a reduced weight of 1.4 kg compared to its predecessor. ENGINE With new features such as its much more compact dimensions, stronger performance throughout the rev range and a weight reduction of 1.8 kg, this newly developed powerplant is the lightest 450 engine on the MX market. With a reworked single overhead camshaft cylinder head and the
2016 KTM 350 SX-F, KTM Factory Demo!!! 2016 KTM 350 SX-F The Ultimate Combination With the arrival of the new generation 350 SX-F the success story can continue. The dominance with which this machine has won one world championship title after another is certainly unrivaled... Since Tony Cairoli s first win in the 2010 MX1 World Championship, his first year as a KTM factory rider on the 350 SX-F, the Red Bull athlete from Sicily has dominated the class with five consecutive world championships at the top tier of motocross aboard this nimble, but powerful bike including many, many race wins. The bike itself comprises of almost as much power as a 450, but with the agility of a 250 so the basic idea is easily summarized, and has been a concept with success from the start. Features May Include: ENGINE The new DOHC (Double Overhead Camshaft) engine of the 350 SX-F features a completely new construction in order to make it even more compact and powerful than before. Fitted with the latest electronic fuel injection system and electric starter, it has a very wide usable speed range, high performance and incredibly efficient rideability. The new design made the engine 20 mm shorter than previously, while reducing the weight by 1 kg to only 27.2 kg. CYLINDER AND PISTON In the redesigned and shorter cylinder, with a bore of 88 mm, works a weight reduced forged bridged box-type piston made by CP. Its new piston crown geometry is adapted to the new high-compression combustion chamber and stands out with its extra rigid structure, combined with a low weight. The compression ratio is at 14:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. TRANSMISSION The new engine is fitted with an all-new and weight reduced, five-speed gearbox. It features the same gear ratio as the previous model, but has wider gear sprockets, featuring a special surface treatment on the 2nd, 3rd and 4th gears for improved reliability. One of the new and special features on the bike is an advanced NO-DIRT gear lever design, which prevents dirt from blocking the joint of the lever and guarantees a safe activation of the transmission. MONOSHOCK The new generation of monoshock made by WP Suspension has been developed for the new SX models in conjunction with the new frame and swingarm architecture, including the reworked linkage system and the new WP forks. The linkage system has also been reworked with a revised geometry and longer pull rods, which was tested last season in most of the KTM factory bikes. FORKS The KTM SX models are fitted with a revolutionary new and super-lightweight WP fork, a 48 mm USD air-sprung fork developed by WP Suspension in close collaboration with KTM. It is a split fork with separate functions for each fork leg. The damping functions are on th
2016 KTM 350 SX-F, KTM Factory Demo!!! 2016 KTM 350 SX-F The Ultimate Combination With the arrival of the new generation 350 SX-F the success story can continue. The dominance with which this machine has won one world championship title after another is certainly unrivaled... Since Tony Cairoli s first win in the 2010 MX1 World Championship, his first year as a KTM factory rider on the 350 SX-F, the Red Bull athlete from Sicily has dominated the class with five consecutive world championships at the top tier of motocross aboard this nimble, but powerful bike including many, many race wins. The bike itself comprises of almost as much power as a 450, but with the agility of a 250 so the basic idea is easily summarized, and has been a concept with success from the start. Features May Include: ENGINE The new DOHC (Double Overhead Camshaft) engine of the 350 SX-F features a completely new construction in order to make it even more compact and powerful than before. Fitted with the latest electronic fuel injection system and electric starter, it has a very wide usable speed range, high performance and incredibly efficient rideability. The new design made the engine 20 mm shorter than previously, while reducing the weight by 1 kg to only 27.2 kg. CYLINDER AND PISTON In the redesigned and shorter cylinder, with a bore of 88 mm, works a weight reduced forged bridged box-type piston made by CP. Its new piston crown geometry is adapted to the new high-compression combustion chamber and stands out with its extra rigid structure, combined with a low weight. The compression ratio is at 14:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. TRANSMISSION The new engine is fitted with an all-new and weight reduced, five-speed gearbox. It features the same gear ratio as the previous model, but has wider gear sprockets, featuring a special surface treatment on the 2nd, 3rd and 4th gears for improved reliability. One of the new and special features on the bike is an advanced NO-DIRT gear lever design, which prevents dirt from blocking the joint of the lever and guarantees a safe activation of the transmission. MONOSHOCK The new generation of monoshock made by WP Suspension has been developed for the new SX models in conjunction with the new frame and swingarm architecture, including the reworked linkage system and the new WP forks. The linkage system has also been reworked with a revised geometry and longer pull rods, which was tested last season in most of the KTM factory bikes. FORKS The KTM SX models are fitted with a revolutionary new and super-lightweight WP fork, a 48 mm USD air-sprung fork developed by WP Suspension in close collaboration with KTM. It is a split fork with separate functions for each fork leg. The damping functions are on th
2017 KTM 250 SX, KTM Factory Demo!!! 2017 KTM 250 SX LEADER OF THE PACK The new KTM 250 SX with its all-new engine has one of the best power-to-weight ratios in the world of dirt, forming the ultimate weapon against more complex 4-stroke rivals. With the grunt to devour all sorts of tracks and terrains, and a lightweight chassis keen to skim the surface, this masterpiece of KTM s R&D and Motorsport departments is born to lead the next pack of winners that prefer premix. Features may include: ENGINE The engine of the 250 SX has been known and respected for being the most powerful 2-stroke engine in its class. But we thought the segment could use an extra push and a solid statement: 2-strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity see to that. Putting our money where our mouth is, we gave the 250 SX engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with a twin-valve controlled power valve, a new counter balancer for less engine vibrations, a 5-speed transmission and a hydraulically operated DDS clutch. This compact fireball truly outshines the competition with absolutely ripping performance and is the right choice for lovers of premix. CYLINDER The newly developed cylinder of the 250 SX - with a bore of 66.4mm - has all-new ports and is fitted with an overhauled power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s mood in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via lightweight head stays. Yes, this is a serious piece of kit. ENGINE CASES These all-new die-cast engine cases feature a 8mm higher clutch shaft and a 27mm higher crankshaft, resulting in better mass centralization. Which is nice if you care about sweet rideability. In addition, it allows the implementation of a counter balance shaft. So your ride will be as relaxed as it is rapid. Plus, your new favorite engine will keep looking as fresh as the day you bought it: redesigned engine covers feature a smart surface structure in order to reduce the wear caused by the rider s boots. CLUTCH The 250 SX employs the KTM-developed DDS clutch (damped diaphragm steel) with a wear-free steel basket and extremely heat resistant clutch plates. This clever design employs a diaphragm spring instead of the usual coil springs, which makes for a considerably easier clutch action. A diaphragm spring also leaves suf
2017 KTM 250 SX, KTM Factory Demo!!! 2017 KTM 250 SX LEADER OF THE PACK The new KTM 250 SX with its all-new engine has one of the best power-to-weight ratios in the world of dirt, forming the ultimate weapon against more complex 4-stroke rivals. With the grunt to devour all sorts of tracks and terrains, and a lightweight chassis keen to skim the surface, this masterpiece of KTM s R&D and Motorsport departments is born to lead the next pack of winners that prefer premix. Features may include: ENGINE The engine of the 250 SX has been known and respected for being the most powerful 2-stroke engine in its class. But we thought the segment could use an extra push and a solid statement: 2-strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity see to that. Putting our money where our mouth is, we gave the 250 SX engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with a twin-valve controlled power valve, a new counter balancer for less engine vibrations, a 5-speed transmission and a hydraulically operated DDS clutch. This compact fireball truly outshines the competition with absolutely ripping performance and is the right choice for lovers of premix. CYLINDER The newly developed cylinder of the 250 SX - with a bore of 66.4mm - has all-new ports and is fitted with an overhauled power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s mood in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via lightweight head stays. Yes, this is a serious piece of kit. ENGINE CASES These all-new die-cast engine cases feature a 8mm higher clutch shaft and a 27mm higher crankshaft, resulting in better mass centralization. Which is nice if you care about sweet rideability. In addition, it allows the implementation of a counter balance shaft. So your ride will be as relaxed as it is rapid. Plus, your new favorite engine will keep looking as fresh as the day you bought it: redesigned engine covers feature a smart surface structure in order to reduce the wear caused by the rider s boots. CLUTCH The 250 SX employs the KTM-developed DDS clutch (damped diaphragm steel) with a wear-free steel basket and extremely heat resistant clutch plates. This clever design employs a diaphragm spring instead of the usual coil springs, which makes for a considerably easier clutch action. A diaphragm spring also leaves suf
2017 KTM 150 SX, KTM Factory Demo. Low hours. 2017 KTM 150 SX Features may include: IN A CLASS OF ITS OWN With the agility of a 125 and enough muscle to take the fight to the 250cc 4-strokes, this bike punches well above its weight. Its snarling engine sets benchmarks in terms of power and torque, rocketing its state-of-the-art chassis miles ahead of the competition. The top step of the podium does have the unmistakable scent of 2-stroke premix exhaust. FEATHERWEIGHT The main target for the KTM engineers when developing the SX models was a massive weight reduction compared to the previous generation. The result: the current SX models are the slimmest, lightest bikes on the track. AIRBOX The airbox design offers maximum protection of the air filter while ensuring maximum airflow. The large twin-air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple you could still pop a fresh one in with a face full of mud. Without tools. In seconds. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated ´No Dirt´ footpegs prevent clogging of the footpeg pivot, even when digging in deep ruts. Looking for a higher riding position? Then just mount the footpegs of the MY2017 EXC models, which are 6mm higher than the SX versions. SWINGARM The cast aluminum design offers low weight and a perfect flex behavior. The single-component casting process eliminates any inconsistencies and inherent weak points created by welding. It s better looking as well. FUEL TANK A lightweight polyethylene tank has a capacity of 1.85 gallons. The filler cap has an inside thread, which makes for easy and reliable closure. HANDLEBAR KTM engineers sure know how to handle handlebars. This tapered one, made of high-strength aluminum by NEKEN, is fixed in damped rubber mounts and has two different positions. From 2017 onwards, the lower handlebar clamps are separated, while on the upper side a new bridge-type clamp guarantees more torsional stiff
2017 KTM 150 SX, KTM Factory Demo. Low hours. 2017 KTM 150 SX Features may include: IN A CLASS OF ITS OWN With the agility of a 125 and enough muscle to take the fight to the 250cc 4-strokes, this bike punches well above its weight. Its snarling engine sets benchmarks in terms of power and torque, rocketing its state-of-the-art chassis miles ahead of the competition. The top step of the podium does have the unmistakable scent of 2-stroke premix exhaust. FEATHERWEIGHT The main target for the KTM engineers when developing the SX models was a massive weight reduction compared to the previous generation. The result: the current SX models are the slimmest, lightest bikes on the track. AIRBOX The airbox design offers maximum protection of the air filter while ensuring maximum airflow. The large twin-air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple you could still pop a fresh one in with a face full of mud. Without tools. In seconds. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated ´No Dirt´ footpegs prevent clogging of the footpeg pivot, even when digging in deep ruts. Looking for a higher riding position? Then just mount the footpegs of the MY2017 EXC models, which are 6mm higher than the SX versions. SWINGARM The cast aluminum design offers low weight and a perfect flex behavior. The single-component casting process eliminates any inconsistencies and inherent weak points created by welding. It s better looking as well. FUEL TANK A lightweight polyethylene tank has a capacity of 1.85 gallons. The filler cap has an inside thread, which makes for easy and reliable closure. HANDLEBAR KTM engineers sure know how to handle handlebars. This tapered one, made of high-strength aluminum by NEKEN, is fixed in damped rubber mounts and has two different positions. From 2017 onwards, the lower handlebar clamps are separated, while on the upper side a new bridge-type clamp guarantees more torsional stiff
2015 KTM 250 SX, 2015 KTM 250 SX POWER UP The 250 SX is regarded as the motocross motorcycle with the best power-to-weight ratio. The lightweight 2-stroke engine scores highly with unrivalled performance packed in an extremely light chassis a formidable rival for the costlier 4-stroke competitors. Features May Include: Bodywork KTM engineers have focussed on designing the bodywork ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail. The front fender is a perfect example of how moulded plastic components can gain maximum stability with a well thought out structure and well-conceived attachment. Seat The ergonomically perfectly designed seat is equipped with a durable foam core, ensuring both greater comfort and higher stability. Airbox At the same time, the design of the airbox guarantees optimum protection of the air filter from dirt plus maximum air throughput for the highest performance. Quick replacement of the twin-air filter - without tools and in a matter of seconds - has long since been an unrivalled KTM standard. Fuel Tank All models in the SX range are equipped with a 7.5 liter, lightweight polyethylene fuel tank. Handlebar All SX models are equipped with the extremely sturdy, tapered Renthal Fatbar 827 handlebar that features an offset specially designed to meet the demands of motocross. In accordance with the proven KTM standard, the handlebar can be fixed in a choice of four positions. For MY 2015, it is equipped with softer two-component grips to spare the rider's hands. Wheels The wheels fitted for MY 2015 feature black coated, high-end Excel rims with lightweight, CNC-machined hubs and spokes with lightweight aluminium nipples, allowing highest levels of stability to be achieved, while keeping weight to a minimum. New Dunlop Geomax MX 52 tires were developed in collaboration with the KTM USA factory team and offer perfect traction with top performance. The new rear sprockets save 50 grams in unsprung mass. Brakes High-tech brakes from Brembo have always been standard equipment on KTM offroad bikes and, together with the lightweight Galfer Wave brake discs, they are the measure of all things in terms of brake technology. As the best brakes in the motocross class, they remain unchanged for MY 2015. Engine The powerful KTM 250 SX engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. Clutch A new DDS clutch (Damped Diaphragm Steel) with diaphragm spring and wear-free steel cage is fitted to the KTM 250 SX engine. The diaphragm spring, which preloads the package, not only reduces the operating force required to pull the clutch, but also provides space
2015 KTM 250 SX, 2015 KTM 250 SX POWER UP The 250 SX is regarded as the motocross motorcycle with the best power-to-weight ratio. The lightweight 2-stroke engine scores highly with unrivalled performance packed in an extremely light chassis a formidable rival for the costlier 4-stroke competitors. Features May Include: Bodywork KTM engineers have focussed on designing the bodywork ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail. The front fender is a perfect example of how moulded plastic components can gain maximum stability with a well thought out structure and well-conceived attachment. Seat The ergonomically perfectly designed seat is equipped with a durable foam core, ensuring both greater comfort and higher stability. Airbox At the same time, the design of the airbox guarantees optimum protection of the air filter from dirt plus maximum air throughput for the highest performance. Quick replacement of the twin-air filter - without tools and in a matter of seconds - has long since been an unrivalled KTM standard. Fuel Tank All models in the SX range are equipped with a 7.5 liter, lightweight polyethylene fuel tank. Handlebar All SX models are equipped with the extremely sturdy, tapered Renthal Fatbar 827 handlebar that features an offset specially designed to meet the demands of motocross. In accordance with the proven KTM standard, the handlebar can be fixed in a choice of four positions. For MY 2015, it is equipped with softer two-component grips to spare the rider's hands. Wheels The wheels fitted for MY 2015 feature black coated, high-end Excel rims with lightweight, CNC-machined hubs and spokes with lightweight aluminium nipples, allowing highest levels of stability to be achieved, while keeping weight to a minimum. New Dunlop Geomax MX 52 tires were developed in collaboration with the KTM USA factory team and offer perfect traction with top performance. The new rear sprockets save 50 grams in unsprung mass. Brakes High-tech brakes from Brembo have always been standard equipment on KTM offroad bikes and, together with the lightweight Galfer Wave brake discs, they are the measure of all things in terms of brake technology. As the best brakes in the motocross class, they remain unchanged for MY 2015. Engine The powerful KTM 250 SX engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. Clutch A new DDS clutch (Damped Diaphragm Steel) with diaphragm spring and wear-free steel cage is fitted to the KTM 250 SX engine. The diaphragm spring, which preloads the package, not only reduces the operating force required to pull the clutch, but also provides space
