Ktm motorcycles for sale in Countryside, Illinois

2010 KTM XC 250

$3,298

Countryside, Illinois

Year 2010

Make KTM

Model XC 250

Category -

Engine -

Posted Over 1 Month

2010 KTM XC 250, Great 2 stroke cross country that's very affordable. Call 708-588-9900 or stop by to take a look.

2017 KTM 300 XC-W

$9,099

Countryside, Illinois

Year 2017

Make KTM

Model 300 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC-W, 2017 KTM 300 XC-W MORE THAN JUST LIGHTNING FAST 4-stroke rivals, beware: this tool might just be the sharpest in the shed. It s hard to find a better power-to-weight ratio in the world of Enduro. If you want torque by the bucket loads, a top-end to die for and a lightweight chassis ready to rise to any occasion, give this 300 cc lightning bolt a go. Features may include: CYLINDER The newly developed cylinder of the 300 XC-W, with a bore of 72mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. BODYWORK KTM R&D, Kiska Design and the factory racers had their say in shaping the plastics with one goal: complete harmony between rider and bike. Perfect ergonomics and contact points provide maximum comfort in movement on the XC-W. The I-beam structures of the front and rear fenders guarantee maximum stability and a low weight thanks to well thought-out construction and mounting. They also stay cleaner for longer. Cleaver brake hose routing on the front number plate prevents wear and tear. GRAPHICS New graphics convey the true READY TO RACE character of the 2017 XC-W model line. AIRBOX The airbox design, featuring new snorkels, offers maximum protection of the air filter against soiling, while ensuring maximum airflow in a quiet way. The new, large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you can pop a fresh one in with a face full of mud - without tools and in seconds. FUEL TANK The lightweight polyethylene tank has a capacity of 2.5 gallons. You will always be able to see how much fuel remains at a glance, thanks to the see-through plastic. By pushing the orange release button in the center of the filler cap, the bayonet mechanism makes refueling quick and easy. WHEELS The XC-W s wheels feature lightweight, CNC machined hubs and high-end Giant rims guaranteeing maximum stability at minimum weight. The wheels are fitted with the latest Maxxis tires. The rear tire features a reworked profile and internal structure for better grip under wet conditions and is more resilient to punctures. Take them wherever you like, traction will be there. SEAT

2017 KTM 300 XC

$9,099

Countryside, Illinois

Year 2017

Make KTM

Model 300 XC

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC, 2017 KTM 300 XC UNRIVALLED POWER-TO-WEIGHT RATIO With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 300 XC has one of the best power-to-weight ratios in it's class. The unrivalled power-to-weight ratio of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2017 the 300 XC features detail improvements and new colors and graphics, but basically retains the same chassis and engine specification as MY 2016. Features May Include: CYLINDER The cylinder of the 300 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference. CLUTCH The KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull. CARBURETOR The 300 XC is fitted with a proven Mikuni TMX 38 carburetor producing the perfect air-fuel mixture. For extreme temperature or altitude the setting can be tuned with supplied jets and needles according to a setting list in the manual. ENGINE The powerful KTM 300 SX engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. FRAME The modern frame design of the 300 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. LINKAGE/SHOCKABSORBER The linkage system of the 300 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences. FORK The XC model range features the 48mm WP AER 48 fork. The setting has been specifically developed for racing cross-country in the US. The forks can be easily adjusted for compression and rebound via the dials on the top of the fork tubes. TRIPLE CLAMPS Top quality, CNC-machined triple clamps have been something of a KTM trademark for years. Ensuring precise handling, they provide proper clamping force for correct flex characteristics, thus improving the action of the forks. For 2017 the upper triple clamp features a newly developed rubber damping system for the handlebar clamp in order to reduce the vibration levels felt through the handlebar. The clamps retain their forward and back adjustabili

2017 KTM 500 EXC-F

$10,699

Countryside, Illinois

Year 2017

Make KTM

Model 500 EXC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 500 EXC-F, 2017 KTM 500 EXC-F Features may include: THE ALPHA The 500 EXC-F is the strongest Enduro bike in the world, although that doesn t mean it s a bully. This motorcycle is as lean and civilized as a thoroughbred racehorse. But let it rip, and its all-new 4-stroke SOHC engine flings the redesigned chassis across all sorts of terrain. Probably ahead of the competition. No sweat, just glory. AIRBOX The airbox design, featuring new snorkels, offers maximum protection of the air filter against soiling, while ensuring maximum airflow in a quiet way. The new, large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple; you can pop a fresh one in with a face full of mud - without tools and in seconds. FUEL TANK The lightweight polyethylene tank has a capacity of 2.5 gallons. You will always be able to see how much fuel remains at a glance, thanks to the see-through plastic. By pushing the orange release button in the center of the filler cap, the bayonet mechanism makes refueling quick and easy. The 4-stroke models are fitted with an integrated fuel pump system and an additional fuel level sensor. Additionally, the fuel line features a 90° connector to the tank for better protection against damage. EXHAUST Noise limits are a real challenge for every manufacturer. Therefore, KTM has put a lot of effort into the development of its exhaust systems. All 4-strokes are fitted with new header pipes and a shorter silencer, mounted as close to the engine as possible. This means more power, extra mass centralization and better rideability. An advanced internal design reduces the noise sufficiently in order to sit safely below the noise limit, while still providing the engine response and performance that is expected from a KTM. WHEELS The EXC s wheels feature lightweight, CNC machined hubs and high-end Giant rims guaranteeing maximum stability at minimum weight. The wheels are fitted with the Continental TKC 80 tires perfect for surefooted performance off-road and stability on-road. SEAT Tailored to meet the needs of the best off-road racers, this durable seat offers great comfort, while being 10mm lower to help you master the most challenging terrain. BATTERY & WIRING HARNESS This new engine is fitted with KTM s proven electric starter a unique KTM feature and a major benefit at all levels of racing. A super compact 495g lithium ion starter battery breathes life into the engine, shaving off two pounds of excess weight while offering three times the starting energy of a conventional battery. Because of its reliability, we decided to eliminate the kick-starter entirely. The battery and wiring harness are centralized in a compartment above the airbox, allowing the mechanic to remov

2017 KTM 250 SX-F

$8,499

Countryside, Illinois

Year 2017

Make KTM

Model 250 SX-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 SX-F, 2017 KTM 250 SX-F SMALL-BORE SUSPERSTAR The 250 SX-F has been on top of the MX2 World Championship for many years now and added a second AMA Supercross Lites Championship to its crowded trophy cabinet. But that s no surprise. The successful combination of a powerful and torquey engine in a lightweight and agile ch***is is bound to place the 250 SX-F onto podium after podium. Features may include: 98.2 KG The main target for the KTM engineers when developing the SX models was a m***ive weight reduction compared to the previous generation. The result: the current SX-F models are the slimmest, lightest bikes on the track. Even though the 4-strokes are equipped with an electric starter as a standard feature, while the competition still needs to be kick started, the SX-F line weigh in pounds less. Rather than kicking to start - you can focus on kicking ***. AIRBOX The airbox design offers maximum protection of the air filter while ensuring maximum airflow. The large twin-air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple you could still pop a fresh one in with a face full of mud. Without tools. In seconds. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated ´No Dirt´ footpegs prevent clogging of the footpeg pivot, even when digging in deep ruts. Looking for a higher riding position? Then just mount the footpegs of the MY2017 EXC models, which are 6mm higher than the SX versions. SWINGARM The cast aluminum design offers low weight and a perfect flex behavior. The single-component casting process eliminates any inconsistencies and inherent weak points created by welding. It s better looking as well. HANDLEBAR KTM engineers sure know how to handle handlebars. This tapered one, made of high-strength aluminum by NEKEN, is fixed in damped rubber mounts and has two different positions. From 2017 onwards, the lower handlebar clamps are separated

2017 KTM 50 SX Mini

$3,499

Countryside, Illinois

Year 2017

Make KTM

Model 50 SX Mini

Category -

Engine -

Posted Over 1 Month

2017 KTM 50 SX Mini, 2017 KTM 50 SX Mini THE PERFECT LAUNCHPAD INTO THE MX WORLD The 50 SX Mini is a real READY TO READY KTM for the youngest of shedders. It is real motorcycle with high quality components that's child's play to control with a linear power delivery and a beginner-friendly automatic clutch. Features may include: ADJUSTABLE AUTOMATIC TRANSMISSION The centrifugally controlled, multi-disc automatic clutch developed by KTM delivers easily controllable acceleration and makes riding the 50 SX the easiest thing in the world. Furthermore, it can still be quickly and easily adjusted to the specific requirements of both track and rider using the "KTM clicker system" - in a matter of seconds and with no special tools required. WP CHASSIS A high quality, upside-down telescopic fork from WP Suspension, featuring 35 mm diameter outer tubes and 100 mm suspension travel, ensures outstanding ride stability. A WP shock absorber connected directly to the swingarm also supplies 147 mm of suspension travel at the rear wheel. SUSPENSION/DAMPING Both the rear shock absorber and the 35 mm upside-down telescopic fork are high-quality products from WP Suspension and guarantee ultimate damping and responsiveness. ENGINE The modern, extremely compact, 2-stroke engine sets the benchmark in its class with its very controllable power. Thanks to the 3-shaft concept, the crankshaft is close to the bike's centre of gravity. This not only benefits the handling; it also provides a flow-optimized inflow angle at the intake membrane a prerequisite for maximum performance. CLUTCH The centrifugally controlled, multi-disc automatic clutch developed by KTM delivers easily controllable acceleration and makes riding this bike the easiest thing in the world. It can be adjusted in no time at all, without special tools, to the specific requirements of both track and rider. RADIATOR Just like the big KTM bikes, the 50 SX is also equipped with water cooling that even cools the crankcase. Generously dimensioned radiators ensure excellent heat dissipation and therefore high reliability, even under extreme loads. BRAKES Both at the front and rear, state-of-the-art hydraulic disc brakes from FORMULA ensure best possible retardation. The exclusive, self-cleaning Wave brake discs stand for the ultimate in race technology and outstanding performance. WHEELS Just like the big factory bikes, the 50 SX is equipped with ultra-light, black anodized aluminum rims that easily withstand even the biggest of jumps. The 50 SX is now equipped with the very latest generation tire from MAXXIS, featuring a profile that guarantees optimum grip on every surface. WATER COOLING The liquid-cooling system of the KTM 50 SX, with two large radiators and addit

2017 KTM 350 SX-F

$9,199

Countryside, Illinois

Year 2017

Make KTM

Model 350 SX-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 350 SX-F, 2017 KTM 350 SX-F THE ULTIMATE COMBO Since Tony Cairoli first took a 350 SX-F to the top of the MX1 World Championship in 2010, the Red Bull KTM athlete has dominated the cl*** aboard this nimble but powerful bike with five consecutive World Championship titles. No surprises here, with the combination of 450-cl*** muscle and the agility of a 250. Who said you can t have everything? Features may include: 99.8 KG The main target for the KTM engineers when developing the SX models was a m***ive weight reduction compared to the previous generation. The result: the current SX-F models are the slimmest, lightest bikes on the track. Even though the 4-strokes are equipped with an electric starter as a standard feature, while the competition still needs to be kick started, the SX-F line weigh in pounds less. Rather than kicking to start - you can focus on kicking ***. AIRBOX The airbox design offers maximum protection of the air filter while ensuring maximum airflow. The large twin-air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you could still pop a fresh one in with a face full of mud. Without tools. In seconds. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated ´No Dirt´ footpegs prevent clogging of the footpeg pivot, even when digging in deep ruts. Looking for a higher riding position? Then just mount the footpegs of the MY2017 EXC models, which are 6mm higher than the SX versions. BRAKES You can t brake any harder, better, faster or stronger. These high-tech Brembo babies are combined with lightweight wave discs made by Galfer. For 2017, the rear brake features a 10mm longer brake pedal and you get new, less aggressive brake pads all round. HANDLEBAR KTM engineers sure know how to handle handlebars. This tapered one, made of high-strength aluminum by NEKEN, is fixed in damped rubber mounts and has two different positions. From 2017

2017 KTM 65 SX

$4,899

Countryside, Illinois

Year 2017

Make KTM

Model 65 SX

Category -

Engine -

Posted Over 1 Month

2017 KTM 65 SX, 2017 KTM 65 SX FAST HAS NO AGE LIMIT The 65 SX is a fully-fledged piece of racing kitsports equipment for young pilots aged around 8 to 12 years with a body height of up to 1.60m. This year s top ministudent features revolutionary WP AER 35 front forks, cool graphics and a lot of detailed improvements that setting the standard in terms of power, riding dynamics, equipment and craftsmanship. Like its larger counterparts, the 65 SX is truly READY TO RACE for its young competitors. Features may include: SWINGARM The 65 SX is fitted with a lightweight cast aluminum swingarm. Conceived using the latest in calculation and simulation software, the design and wall thickness have been made for minimum weight at optimum stiffness and precisely defined flexibility. In addition it features a robust 2-compound chain guide similar to the full-size models. FRONT SUSPENSION The new 65 SX is the first model in its class fitted with a modern, fully adjustable air fork: the AER 35, made by WP Suspension. Beside a massive weight reduction of 1.6 lbs, the newly developed upside-down front forks with 35mm tube diameter and 215mm of travel ensure outstanding comfort, damping characteristics and directional stability. Another main benefit for junior riders is that the air spring fitted in the left fork leg can be adjusted perfectly and simply to the rider s weight just with an air fork pump. REAR SUSPENSION On the rear wheel a WP monoshock linked directly to the swingarm provides excellent damping performance and is fully adjustable in order set the damping perfectly to rider s preferences and track conditions. The rear wheel travel is 270mm. WHEELS Like the big KTM factory racers, the 65 SX has super lightweight, black anodized, aluminum rims providing highest strength and safety. The OEM knobbly MAXXIS tires grip superbly on any surface. BRAKES The 65 SX is fitted front and rear with massive 4-cylinder calipers that grip lightweight wave brake discs of 198mm front and 160mm rear diameter. The hydraulic brake system is easy to control and ensures the best deceleration and the highest standard. ENGINE The 65 SX benefits from cutting-edge 2-stroke technology and an easy to shift 6-speed transmission with a hydraulic clutch. The cylinder, with its pressure controlled exhaust valve, provides class-leading power and plenty of torque. CYLINDER The high performance cylinder features the pressure controlled exhaust valve (PCEV) and provides an unrivaled performance within the highly competitive 65cm3 class. CLUTCH An outstanding feature of the 65 SX is the hydraulic clutch made by Formula. It ensures an easy clutch action and well-defined modulation. BODYWORK The bodywork is derived from the full-size SX model

2017 KTM 300 XC-W Six Days

$9,999

Countryside, Illinois

Year 2017

Make KTM

Model 300 XC-W Six Days

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC-W Six Days, 2017 KTM 300 XC-W Six Days SIX DAYS, SIX WINS KTM has ruled off-road for decades. The special edition SIX DAYS models celebrate this success with special performance upgrades and top-of-the-line components. In 2016 the ISDE (International Six Days Enduro) will be held in Navarra, Spain and the KTM model line-up has been suitably equipped to handle anything the dusty and rocky terrain can throw at it. Arriba! Features may include: FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a half of a pound lighter than its predecessor. ENGINE MANAGEMENT SYSTEM The state-of-the-art Keihin Engine Management System with electronic fuel injection features an all-new 42mm throttle body. Thanks to its unique injector position, the engine s response gives a whole new meaning to the word instantaneous . And to make life even easier, separate systems for cold starts and idle adjustment await you. Push the throttle back when the engine s alive and well, and the cold start mode disengages. As a proud owner of a SIX DAYS 4-stroke model you can select a stronger power curve and activate the unique traction control system for maximized grip. A bonus mapping via the map select switch on the handlebar, brings even more ferocity to the game. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. The orange coating truly makes it stand out; precisely what an engineering m

2017 KTM 150 XC-W

$7,999

Countryside, Illinois

Year 2017

Make KTM

Model 150 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 150 XC-W, 2017 KTM 150 XC-W MINIMAL FUSS; MAXIMUM FUN XC means cross-country. W represents its wide-ratio transmission. KTM stands for winning. This model is a race-ready bike built for closed course enduro racing. With the agility of a 125 and enough muscle to take the fight to the 250 cc 4-Strokes, this bike punches well above its weight. That s why when the going gets tough, the tough get an XC-W. Features may include: WEIGHT REDUCTION The main target for the KTM engineers when developing the XC-W models was a massive weight reduction compared to the previous generation. The result: the current XC-W s are the slimmest, lightest bikes in the enduro segment. SWINGARM This updated design allows for an optimized mounting position of the PDS shock, providing more progressive action. Furthermore, the cast aluminum design guarantees lower weight and a perfect flex behavior. The single-component casting process also eliminates any inconsistencies and weak points. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated No Dirt footpegs prevent smudging up the pegs, even when digging in deep ruts. The pegs on the EXC models are 6mm higher than the ones used on SX models, which benefits ground clearance. But you can swap them at will. FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a

2017 KTM 450 XC-F

$10,099

Countryside, Illinois

Year 2017

Make KTM

Model 450 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 XC-F, 2017 KTM 450 XC-F Features may include: HOLESHOT BRAGGING RIGHTS If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015. AIRBOX The new airbox design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in conjunction with lighter intake snorkel that is made of a new material to reduce the deformation due to air intake pulse for improved performance. The new Twin Air filter is easier and safer to mount and can be changed without tools in seconds, a standard and original KTM feature. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For MY 2017 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. SEAT Ergonomically perfect, the new seat has a higher foam volume, which offers great comfort and durability, while weighing the same as the previous model. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling, and last but not least it´s lighter than the previous model. GRAPHICS New modern in-mold graphics highlight the Ready to Race character of the cutting-edge 2017 XC-F range of bikes. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. FOOTPEG A new sophisticated "No-Dirt" footpeg solution prevents dirt from blocking the pegs in order to keep them in the correct position, even when dragging in deep ruts. In addition, the new footpegs are larger, lighter and mor

2017 KTM 450 XC-F

$10,099

Countryside, Illinois

Year 2017

Make KTM

Model 450 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 XC-F, 2017 KTM 450 XC-F Features may include: HOLESHOT BRAGGING RIGHTS If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015. AIRBOX The new airbox design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in conjunction with lighter intake snorkel that is made of a new material to reduce the deformation due to air intake pulse for improved performance. The new Twin Air filter is easier and safer to mount and can be changed without tools in seconds, a standard and original KTM feature. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For MY 2017 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. SEAT Ergonomically perfect, the new seat has a higher foam volume, which offers great comfort and durability, while weighing the same as the previous model. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling, and last but not least it´s lighter than the previous model. GRAPHICS New modern in-mold graphics highlight the Ready to Race character of the cutting-edge 2017 XC-F range of bikes. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. FOOTPEG A new sophisticated "No-Dirt" footpeg solution prevents dirt from blocking the pegs in order to keep them in the correct position, even when dragging in deep ruts. In addition, the new footpegs are larger, lighter and mor

2016 KTM 350 SX-F

$8,699

Countryside, Illinois

Year 2016

Make KTM

Model 350 SX-F

Category -

Engine -

Posted Over 1 Month

2016 KTM 350 SX-F, 2016 KTM 350 SX-F The Ultimate Combination With the arrival of the new generation 350 SX-F the success story can continue. The dominance with which this machine has won one world championship title after another is certainly unrivaled... Since Tony Cairoli s first win in the 2010 MX1 World Championship, his first year as a KTM factory rider on the 350 SX-F, the Red Bull athlete from Sicily has dominated the class with five consecutive world championships at the top tier of motocross aboard this nimble, but powerful bike including many, many race wins. The bike itself comprises of almost as much power as a 450, but with the agility of a 250 so the basic idea is easily summarized, and has been a concept with success from the start. Features May Include: ENGINE The new DOHC (Double Overhead Camshaft) engine of the 350 SX-F features a completely new construction in order to make it even more compact and powerful than before. Fitted with the latest electronic fuel injection system and electric starter, it has a very wide usable speed range, high performance and incredibly efficient rideability. The new design made the engine 20 mm shorter than previously, while reducing the weight by 1 kg to only 27.2 kg. CYLINDER AND PISTON In the redesigned and shorter cylinder, with a bore of 88 mm, works a weight reduced forged bridged box-type piston made by CP. Its new piston crown geometry is adapted to the new high-compression combustion chamber and stands out with its extra rigid structure, combined with a low weight. The compression ratio is at 14:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. TRANSMISSION The new engine is fitted with an all-new and weight reduced, five-speed gearbox. It features the same gear ratio as the previous model, but has wider gear sprockets, featuring a special surface treatment on the 2nd, 3rd and 4th gears for improved reliability. One of the new and special features on the bike is an advanced NO-DIRT gear lever design, which prevents dirt from blocking the joint of the lever and guarantees a safe activation of the transmission. MONOSHOCK The new generation of monoshock made by WP Suspension has been developed for the new SX models in conjunction with the new frame and swingarm architecture, including the reworked linkage system and the new WP forks. The linkage system has also been reworked with a revised geometry and longer pull rods, which was tested last season in most of the KTM factory bikes. FORKS The KTM SX models are fitted with a revolutionary new and super-lightweight WP fork, a 48 mm USD air-sprung fork developed by WP Suspension in close collaboration with KTM. It is a split fork with separate functions for each fork leg. The damping functions are on the right side, whereas the air spr

2014 KTM SX 65

$8,099

Countryside, Illinois

Year 2016

Make KTM

Model 350 SX-F

Category -

Engine -

Posted Over 1 Month

2016 KTM 350 SX-F, 2016 KTM 350 SX-F The Ultimate Combination With the arrival of the new generation 350 SX-F the success story can continue. The dominance with which this machine has won one world championship title after another is certainly unrivaled... Since Tony Cairoli s first win in the 2010 MX1 World Championship, his first year as a KTM factory rider on the 350 SX-F, the Red Bull athlete from Sicily has dominated the class with five consecutive world championships at the top tier of motocross aboard this nimble, but powerful bike including many, many race wins. The bike itself comprises of almost as much power as a 450, but with the agility of a 250 so the basic idea is easily summarized, and has been a concept with success from the start. Features May Include: ENGINE The new DOHC (Double Overhead Camshaft) engine of the 350 SX-F features a completely new construction in order to make it even more compact and powerful than before. Fitted with the latest electronic fuel injection system and electric starter, it has a very wide usable speed range, high performance and incredibly efficient rideability. The new design made the engine 20 mm shorter than previously, while reducing the weight by 1 kg to only 27.2 kg. CYLINDER AND PISTON In the redesigned and shorter cylinder, with a bore of 88 mm, works a weight reduced forged bridged box-type piston made by CP. Its new piston crown geometry is adapted to the new high-compression combustion chamber and stands out with its extra rigid structure, combined with a low weight. The compression ratio is at 14:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. TRANSMISSION The new engine is fitted with an all-new and weight reduced, five-speed gearbox. It features the same gear ratio as the previous model, but has wider gear sprockets, featuring a special surface treatment on the 2nd, 3rd and 4th gears for improved reliability. One of the new and special features on the bike is an advanced NO-DIRT gear lever design, which prevents dirt from blocking the joint of the lever and guarantees a safe activation of the transmission. MONOSHOCK The new generation of monoshock made by WP Suspension has been developed for the new SX models in conjunction with the new frame and swingarm architecture, including the reworked linkage system and the new WP forks. The linkage system has also been reworked with a revised geometry and longer pull rods, which was tested last season in most of the KTM factory bikes. FORKS The KTM SX models are fitted with a revolutionary new and super-lightweight WP fork, a 48 mm USD air-sprung fork developed by WP Suspension in close collaboration with KTM. It is a split fork with separate functions for each fork leg. The damping functions are on the right side, whereas the air spr

2017 KTM 250 XC-W

$8,899

Countryside, Illinois

Year 2017

Make KTM

Model 250 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC-W, 2017 KTM 250 XC-W PYROTECHNICS When the smoke clears, you ll be the last rider standing. The new KTM 250 XC-W is one of the best pound-for-pound fighters in the world of Enduro, pummeling it s more complex 4-Stroke rivals. All muscle, no fat: this 2-stroke machine is as lean as it is powerful. Features may include: ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2-stroke symphony when you re on the pipe. CYLINDER The newly developed cylinder of the 250 XC-W, with a bore of 66.4mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2-stroke sym