2014 KTM 250 XC-F, 2 tanks of gas ran through this one. Like new. Financing is available. 2014 KTM 250 XC-F HANDLING MIRACLE WITH AN ALL-NEW ENGINE The 250 XC-F has been is an established force. The feisty four-stroke 250 engine hits the scene with a new Supercross hampionship under its belt combined with cross-country competition in it's components. In fact, the 250 XC-F has taken Factory FMF/KTM rider Maria Forsberg to three consecutive Women's GNCC Championships and 2 X-Games Enduro X Gold Medals. Features May Include: CLUTCH The highly compact CSS (coil spring steel) clutch uses a wear-free steel basket and eight clutch plates which are extremely heat resistant due to their steel carrier discs. The Brembo hydraulic system with its new master cylinder provides easy and precise modulation. CYLINDER HEAD he centerpiece of the compact DOHC engine is its cutting-edge cylinder head with two overhead camshafts and DLC-coated followers a design that allows to break the engine speed sound barrier of 14,000 rpm. Combined with extra lightweight titanium valves (intake 32.5mm, exhaust 26.5mm), flow optimized ports ensure a maximized flow rate for top performance. BALANCER SHAFT In order to balance the mass-forces, the 250 engine uses a multifunctional counter balance shaft which also drives the water pump and timing chain. The engine receives a new water pump cover with a new gasket in order to optimize the seal. ENGINE MANAGEMENT SYSTEM (EMS) In combination with the revolutionary injector position as developed by KTM, the Keihin Engine Management System with electronic fuel injection and 44mm throttle body provides the engine with a spontaneous response and maximum performance. For 2014, the wire harness of the 250 XC-F has been further simplified and even higher quality wires and connectors are used. In order to protect them against pressure washers, many connectors are now enclosed in new rubber boots. With an optional map-select switch from the PowerParts program, EMS continues to allow selecting different engine characteristics. In addition, the optional User-Setting-Tool allows to readout engine data with a laptop and change the ignition and injection mappings with a few mouse clicks. SUSPENSION/DAMPING For 2014, all XC models are fitted with a newly developed 48mm 4CS Closed Cartridge fork featuring the patented 4-Chamber-System. The sophisticated design provides very constant and sensitive damping characteristics and an adjustable end progression. The new hand click adjuster system is now accessible on top of the fork, rebound on the right hand side, compression on the left. The fork is fitted with improved seal rings made by SKF and high performance fork oil (SAE 4). Compared to the predecessor, the new 4CS fork is lighter , easier to maintain and has been c
2014 KTM 250 XC, UNIT HAS BARK BUSTERS. OVERSIZED FOOTPEGS, DISC BRAKE GUARD. RADIATOR GUARD AND FRESH TIRES 2014 KTM 250 XC THE VICTORY MACHINE Unbeatable power-to-weight ratio, low maintenance costs and high-performance make the 250 XC an unrivaled machine for extremely tough cross-country rides. The state-of-the-art engine is activated effortlessly with an electric starter and has been regarded for years as the most successful two-stroke power unit on the market. Best-in-class, enduro-specific performance, a redesigned reed valve housing, the perfectly designed six-speed transmission and the further refined DDS clutch send the engine to the very top of its class. Featres May Include: OPTIMIZED ENGINE The engine has a redesigned reed valve housing featuring Boyesen high-performance reeds. Thanks to the innovations, performance has been optimized and responsiveness improved. Ignition curve and cylinder head have been optimized and the carburetor setting adjusted. The new developments make the 250 XC even more rideable. CYLINDER HEAD A new cylinder head with optimized combustion chamber makes its debut in MY 2014, delivering more effective combustion and above all better responsiveness in the partial load range. This results in better power development and optimized rideability SUPERIOR SUSPENSION SETTINGS For 2014, all XC models are fitted with a newly developed 48mm 4CS Closed Cartridge fork featuring the patented 4-Chamber-System. The sophisticated design provides very constant and sensitive damping characteristics and an adjustable end progression. The new hand click adjuster system is now accessible on top of the fork, rebound on the right hand side, compression on the left. The fork is fitted with improved seal rings made by SKF and high performance fork oil (SAE 4). Compared to the predecessor, the new 4CS fork is lighter, easier to maintain and has been completely valved to match the shock for XC racing. SWINGARM The cast aluminum swingarm has been developed with state-of-the-art calculation and simulation software and constructed, in terms of design and wall thickness, for minimum weight with optimum stiffness and precisely defined flexibility. For the 2014 model year, our engineers have revised the chainguide for the benefit of higher functional reliability, while simultaneously reducing the weight. FRAME The state-of-the-art frame design made of lightweight, high-strength chromoly steel sections combines maximum longitudinal stiffness with optimum torsional rigidity. It guarantees easy handling and precise cornering, but also outstanding stability. TRIPLE CLAMPS The lower triple clamp has been modified for optimum attachment of the new front fender. Thanks to its new contour and attachment with two bolts from the front and two from below, the n
