Husqvarna Fc250 motorcycles for sale

1-15 of 334

Sort By

2015 Husqvarna FC 250

2015 Husqvarna FC 250

$4,999

Bremerton, Washington

Year 2015

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FC 250, 2015 Husqvarna® FC 250 HIGH TECH RACE WEAPON An exhilarating, high-revving power delivery and a lightweight and agile chassis, make the FC 250 a true contender in 250 4-stroke racing at all levels worldwide. The 14,000 RPM rev limit and peak power at well over 40 horsepower are benchmark performance figures. High quality standard equipment includes electric start, a hydraulic clutch, Brembo brakes and a handlebar-mounted map switch. Features May Include: ENGINE MANAGEMENT SYSTEMThe electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power.ENGINETechnologically advanced solutions in engine layout and components ensure explosive engine performance. The lightweight and compact DOHC 4-stroke engine has been designed to offer top performance without compromise. The large titanium valves (32.5mm intake and 26.5mm exhaust) weigh only 19.6g each on the intake side and 18g on the exhaust side.CRANKSHAFT, CONROD AND PISTONThe high revving 250cc engine demands high-tech and reliable engine components. The crankshaft features a plain big end bearing and force-fitted bearing shells, ensuring durability and long service intervals. The conrod and crankshaft are produced by industry leader Pankl to exacting standards. The piston is produced by König and has been designed for minimum weight to suit the high-revving, high output nature of the FC 250. The forged box-type piston weighs only 200g and combines high performance and reliability, and guarantees a compression ratio of 13.9:1 for maximum power output.FRAMEThe engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal feedback and complete confidence in every situation. This was achieved by designing the lightweight chromium molybdenum frame with precise longitudinal flex that helps absorb impacts from the rear wheel, working together with the suspension for better comfort and greater feedback. The torsional rigidity enhances turn-in, sharp handling and stability even on the roughest terrain, giving the rider complete confidence in finding his lines and increasing his pace lap after lap.SUBFRAMEThe lightweight polyamide rear subframe has been reinforced with an additional screw on the airbox side that improves the fitment between the left subframe arm and the airbox. The improved seal guarantees better performance and durability. The three-piece composite subframe, made of high strength polyamide with a precision injectio

2017 Husqvarna FC 250

2017 Husqvarna FC 250

$8,599

Evansville, Indiana

Year 2017

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 250, 2017 Husqvarna® FC 250 RAZOR-SHARP AGILITY The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed. Features may include: EngineAll major components and shaft arrangements have been carefully designed and placed in specific positions that best suit the performance and handling characteristics of the FC 250. The 250 cc engine is not only light at 26.1 kg but also remarkably powerful with an overall power output of 46 hp at the output shaft. One way in which this was achieved was by engineering key components to produce the least amount of friction possible, reducing drag as a result.DOHC cylinder headThe DOHC cylinder head features finger followers with a DLC (diamond like carbon) coating resulting in minimal friction and optimal performance. These actuate large titanium valves (32.5 mm intake, 26.5 mm exhaust) which at the 14,000 rpm rev-limit open and close multiple times each second introducing fuel/air mixture to the carefully designed combustion chamber delivering efficient and optimal power throughout the rev-range. The cylinder head is now fixed to the frame using lightweight aluminium brackets saving 114 grams while keeping the same structural integrity.CrankcasesThe aluminium crankcases have been designed to house the internal components of the engine in the perfect position to achieve the ideal centre of gravity. The lightweight casings are manufactured using a high-pressure die cast production process, resulting in thin wall thickness while retaining exceptional reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers.Exhaust systemThe FC 250 exhaust system has been expertly designed to deliver the best possible performance while adhering to the FIM noise limits. The header pipe features a resonance chambers for optimal performance while the silencer is crafted from lightweight and strong aluminium.Magura hydraulic clutchThe FC 250 features a Magura hydraulic clutch system. The high quality German-made clutch system guarantees even wear, almost maintenance-free operation and perfect modulation in every condition. This means that play is constantly compensated so that the pressure point and function of the clutch remain identical in cold or hot conditions, as well as over time.CSS clutchThe 250 cc and 350 cc engines feature a CSS (coil spring steel) clutch with Magura hydraulics and lever. The CSS clu

2017 Husqvarna FC 250

2017 Husqvarna FC 250

$7,999

Greenwood Village, Colorado

Year 2017

Make Husqvarna

Model FC 250

Category -

Engine 249.9 cc cc

Posted Over 1 Month

The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed.

2017 Husqvarna FC 250

2017 Husqvarna FC 250

Request Price

Waterford, Connecticut

Year 2017

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 250,

2017 Husqvarna FC250

2017 Husqvarna FC250

$8,599

Waynesboro, Virginia

Year 2017

Make Husqvarna

Model FC250

Category -

Engine -

Posted Over 1 Month

2017 HUSQVARNA FC250,

2015 Husqvarna FC 250

2015 Husqvarna FC 250

$8,149

Gresham, Oregon

Year 2015

Make Husqvarna

Model FC 250

Category -

Engine 249.91 cm³ cc

Posted Over 1 Month

High Tech Race WeaponAn exhilarating, high-revving power delivery and a lightweight and agile chassis, make the FC 250 a true contender in 250 4-stroke racing at all levels worldwide. The 14,000 rpm rev limit and peak power at well over 40 horsepower are benchmark performance figures. High quality standard equipment includes electric start, a hydraulic clutch, Brembo brakes and a handlebar-mounted map switch.

2016 Husqvarna FC 250

2016 Husqvarna FC 250

$7,299

Spokane Valley, Washington

Year 2016

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2016 Husqvarna FC 250, only 3 hours on this lightly used Demo bike! 2016 Husqvarna® FC 250 RAZOR-SHARP AGILITY A completely new 250cc DOHC engine has been designed to perfectly match the new generation chassis. All internal components have been revised and repackaged in order to reposition the engine within the new chromoly steel frame, shifting the mass closer to the centre of gravity of the motorcycle. In combination with the shorter and lighter carbon fibre rear subframe, revised 4CS fork, new shock, new rear link and shorter exhaust, the new FC 250 has enormously improved handling, manoeuvrability and performance compared to the previous generation. Features May Include: NEW FRAMEThe engineers in Research and Development have designed a completely new chromium molibdenum steel frame that redefines every structural aspect in order to improve handling, ergonomics and packaging. The torsional rigidity and longitudinal stiffness have been completely rethought. The 6mm wider and 2mm lower steel tubes offer 20% more torsional rigidity and 30% less longitudinal stiffness compared to the previous generation frame design. These characteristics, matched to the new engine stays, improve handling precision while at the same time increasing bump-absorption and feeling.NEW SUSPENSIONWP s 4CS fork has a revised setup to match the new chassis characteristics of the MY16 generation motocross. As with all 4CS forks by WP, the clicker settings can be easily and quickly adjusted via the dials on the top of the fork tubes. The red dial on the right alters rebound damping, while the white dial on the left is for compression damping. A new, shorter and lighter shock by WP features a larger gas chamber designed to maintain consistent performance during use. New internal components, such as the piston and shock shaft increase setup options. A new clevis design contributes to shortening the overall length by 12 mm, while the stroke is reduced by 3 mm. The shock is completely adjustable for high and low speed compression damping as well as rebound. The rear link has been completely redesigned to match the new rear shock. 148.2 mm pull rods replace the previous link s 145 mm items and, combined with the redesigned bell crank, maintains a similar progressive rate as MY15. Rear wheel travel is now 300 mm and, thanks to the uprated rear suspension behaviour, softer springs can be used.NEW CRANKCASESThe new FC 250 features a completely redesigned engine with mass-centralisation and weight reduction as the main goals. All the major components have been repositioned; the crankshaft has been raised by 6 mm while the clutch shaft is 11.1 mm further back and 26.9 mm higher up. These modifications required a complete redesign of the crankcases which are now significantly more compact and lighter.NEW ENGINEThe crankshaft has been repositioned and is now 6 mm

2017 Husqvarna FC 250

2017 Husqvarna FC 250

$8,599

Spokane Valley, Washington

Year 2017

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 250, In stock now!! 2017 Husqvarna® FC 250 RAZOR-SHARP AGILITY The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed. Features may include: EngineAll major components and shaft arrangements have been carefully designed and placed in specific positions that best suit the performance and handling characteristics of the FC 250. The 250 cc engine is not only light at 26.1 kg but also remarkably powerful with an overall power output of 46 hp at the output shaft. One way in which this was achieved was by engineering key components to produce the least amount of friction possible, reducing drag as a result.DOHC cylinder headThe DOHC cylinder head features finger followers with a DLC (diamond like carbon) coating resulting in minimal friction and optimal performance. These actuate large titanium valves (32.5 mm intake, 26.5 mm exhaust) which at the 14,000 rpm rev-limit open and close multiple times each second introducing fuel/air mixture to the carefully designed combustion chamber delivering efficient and optimal power throughout the rev-range. The cylinder head is now fixed to the frame using lightweight aluminium brackets saving 114 grams while keeping the same structural integrity.CrankcasesThe aluminium crankcases have been designed to house the internal components of the engine in the perfect position to achieve the ideal centre of gravity. The lightweight casings are manufactured using a high-pressure die cast production process, resulting in thin wall thickness while retaining exceptional reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers.Exhaust systemThe FC 250 exhaust system has been expertly designed to deliver the best possible performance while adhering to the FIM noise limits. The header pipe features a resonance chambers for optimal performance while the silencer is crafted from lightweight and strong aluminium.Magura hydraulic clutchThe FC 250 features a Magura hydraulic clutch system. The high quality German-made clutch system guarantees even wear, almost maintenance-free operation and perfect modulation in every condition. This means that play is constantly compensated so that the pressure point and function of the clutch remain identical in cold or hot conditions, as well as over time.CSS clutchThe 250 cc and 350 cc engines feature a CSS (coil spring steel) clutch with Magura hydraulics and lever. The CSS clutch has six coil springs a

2016 Husqvarna FC 250

2016 Husqvarna FC 250

$6,399

Altoona, Pennsylvania

Year 2016

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2016 HUSQVARNA FC 250,

2015 Husqvarna FC 250

2015 Husqvarna FC 250

$4,999

Altoona, Pennsylvania

Year 2015

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2015 HUSQVARNA FC 250, HUGE $2,000 savings off MSRP on this unit but you must buy before 5/31/16.

2015 Husqvarna FC 250

2015 Husqvarna FC 250

$5,500

Buzzards Bay, Massachusetts

Year 2015

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2015 FC250 - extremely low hours. Barely ridden - simply don't have the time for it. Plastic is mint - and bike is mechanically mint. Oil change before it was stored in a heated space for winter. Ready to rip for the spring!! All original manuals and Husky tool kit come w the bike as well. Only cleaner bike you will find is brand new on a showroom floor!!

2016 Husqvarna FC 250

2016 Husqvarna FC 250

$4,799

Paris, Texas

Year 2016

Make Husqvarna

Model FC 250

Category -

Engine 250 cc

Posted Over 1 Month

This Husky FC 250 was bought brand new in the summer of 2016 as a 2nd bike for a Pro Rider who quit due to injury within 2 weeks of the purchase!  It has less than 10 hours ride time.  Customized front suspension. Has some superficial scratches and chips but otherwise in GREAT SHAPE.  Comes with husqvarna stand.  This was purchased as an investment in this Pro that went south after an injury!  These are selling New for minimum of $6500 to $8500.  I'm asking $4800 simply to cut my loses as an investor in this grounded rider.  Also have high end gear including Helmet, like new boots (size US 11), gloves, goggles, 5 gallon easy pour gas tank etc that can be negotiated at a very low price.  You won't catch a deal like this very often.This is a deal not to be overlooked or ignored.

2014 Husqvarna FC 250

2014 Husqvarna FC 250

Request Price

Costa Mesa, California

Year 2014

Make Husqvarna

Model FC 250

Category -

Engine 249.91 cc cc

Posted Over 1 Month

High Tech Race Weapon The MX2 category has a new contender. The FC 250, with its powerful, high-revving and compact 250 cc 4-stroke engine, sharp handling, light weight and extreme agility, takes it straight to the top. The 14,000 rpm rev limit clearly indicates the FC 250's potential. Experts and amateurs alike are sure to appreciate the electric start for peace of mind in every circumstance. Super sharp throttle response, smooth clutch action and precise shifting pave the way to a holeshot.

2017 Husqvarna FC 250

2017 Husqvarna FC 250

$8,599

York, Pennsylvania

Year 2017

Make Husqvarna

Model FC 250

Category -

Engine -

Posted Over 1 Month

2017 HUSQVARNA FC 250,

2016 Husqvarna FC - 250

2016 Husqvarna FC - 250

$6,999

Covina, California

Year 2016

Make Husqvarna

Model FC - 250

Category -

Engine -

Posted Over 1 Month

2016 HUSQVARNA FC - 250, Largest selection of used inventory & the world's largest powersports dealer! For the best pricing & financing call us today! WE WON'T BE BEAT!