2005 Ktm 350 motorcycles for sale in Iowa

2015 KTM 350 XC-F

$7,450

Cedar Rapids, Iowa

Year 2015

Make KTM

Model 350 XC-F

Category -

Engine -

Posted Over 1 Month

2015 KTM 350 XC-F, The KTM 350 XC-F is a super capable dirtbike thanks to a powerful motor coupled to a lightweight bike. This shining example has been upgraded with a Rekluse clutch for clutchless stops, a Scott steering stabilizer, SRT radiator guards, an Acerbis bash plate, N-style seat, TMD chain guide, and Linkage skid plate.

2014 KTM 350 XC-F

$5,499

Atlantic, Iowa

Year 2014

Make KTM

Model 350 XC-F

Category -

Engine -

Posted Over 1 Month

2014 KTM 350 XC-F, 2014 KTM 350 XC-F BEST IN CLASS The 350 XC-F has taken Factory FMF/KTM rider Charlie Mullins to multiple National Enduro wins during the opening half of the 2013 season. His teammate Kailub Russell has matched his success on the 350cc machine with wins in both the GNCC and OMA 2013 series. Features May Include: TRIPLE CLAMPS The lower triple clamp has been modified for optimum attachment of the new front fender. Thanks to its new contour and attachment with two bolts from the front and two from below, the new fender boasts significantly higher stability. SUSPENSION/DAMPING For 2014, all XC models are fitted with a newly developed 48mm 4CS Closed Cartridge fork featuring the patented 4-Chamber-System. The sophisticated design provides very constant and sensitive damping characteristics and an adjustable end progression. The new hand click adjuster system is now accessible on top of the fork, rebound on the right hand side, compression on the left. The fork is fitted with improved seal rings made by SKF and high performance fork oil (SAE 4). Compared to the predecessor, the new 4CS fork is lighter , easier to maintain and has been completely valved to match the shock for XC racing. FRAME The state-of-the-art frame design made of lightweight, high-strength chromoly steel sections combines maximum longitudinal stiffness with optimum torsional rigidity. It guarantees easy handling and precise cornering, but also outstanding stability. SWINGARM The cast aluminium swingarm has been developed with state-of-the-art calculation and simulation software and constructed, in terms of design and wall thickness, for minimum weight with optimum stiffness and precisely defined flexibility. For the 2014 model year, our engineers have revised the chainguide for the benefit of higher functional reliability, while simultaneously reducing the weight. AIR BOX The airbox design offers maximum protection of the air filter against dirt while ensuring maximum airflow for top performance. The Twin Air filter can be changed without tools in seconds, a standard for KTM. ENGINE MANAGEMENT SYSTEM (EMS) In combination with the revolutionary injector position as developed by KTM, the Keihin Engine Management System with electronic fuel injection and 44mm throttle body provides the engine with a spontaneous response and maximum performance. For 2014, the wire harness of the 350 XC-F has been further simplified and even higher quality wires and connectors are used. In order to protect them against pressure washers, many connectors are now enclosed in new rubber boots. With an optional map-select switch from the PowerParts program, EMS continues to allow selecting different engine characteristics. In addition, the optional User-Setting-Tool allows to readout engine da

2011 KTM 350 SX-F

$8,499

Sioux City, Iowa

Year 2011

Make KTM

Model 350 SX-F

Category -

Engine 349.7 cc cc

Posted Over 1 Month

In 2006, Stefan Everts was reigning world champion (with a mere 14 victories in 15 Grand Prix) and then he became KTM Race Director. Back then, he could already see where the future of motocross was heading and in KTM he found an ideal partner for his vision: efficient and maximum practicable performance from smaller displacements in an overall package that's tailored unconditionally to the requirements of the rider. Four years or so later, it's ready: the new 350 SX-F. With a new engine, fuel injection system and smaller displacement, new bodywork, new chassis - in fact, a whole new concept. What with the first Grand Prix victory and racing to the top of the overall standings in the MX1 class after only two races, maybe even the beginning of a new era in motocross...

2017 KTM 500 EXC-F

$8,499

Sioux City, Iowa

Year 2011

Make KTM

Model 350 SX-F

Category -

Engine 349.7 cc cc

Posted Over 1 Month

In 2006, Stefan Everts was reigning world champion (with a mere 14 victories in 15 Grand Prix) and then he became KTM Race Director. Back then, he could already see where the future of motocross was heading and in KTM he found an ideal partner for his vision: efficient and maximum practicable performance from smaller displacements in an overall package that's tailored unconditionally to the requirements of the rider. Four years or so later, it's ready: the new 350 SX-F. With a new engine, fuel injection system and smaller displacement, new bodywork, new chassis - in fact, a whole new concept. What with the first Grand Prix victory and racing to the top of the overall standings in the MX1 class after only two races, maybe even the beginning of a new era in motocross...

2014 KTM 350 SX-F

$5,299

Atlantic, Iowa

Year 2014

Make KTM

Model 350 SX-F

Category -

Engine -

Posted Over 1 Month

2014 KTM 350 SX-F, 2014 KTM 350 SX-F BENCHMARK In the three years since the revolutionary 350 SX-F has been introduced, this bike has proven that it is possible to win the MX1 World Championship even with reduced displacement. Since then, Tony Cairoli has clearly dominated the class with the 350 SX-F, and in 2013, the Italian once again bets on the ingenious combination of low-weight, playful agility and a high-revving engine. A unique recipe for success that benefits amateurs and pros alike. Features May Include: TRIPLE CLAMPS Top-quality, CNC-machined triple clamps have been something of a KTM trademark. Ensuring a precise handling, they perceptibly support the flex characteristics, and with it, the fork's action. SWINGARM Designed using the latest in calculation and simulation software, the design and wall thickness of the cast aluminum swingarm have been optimized for minimum weight at optimum stiffness and precisely defined flexibility provides perfect stability at minimum weight. For 2014, the engineers have revised the chain guide to increase reliability while lowering the weight. SUSPENSION/DAMPING The rear monoshock as well as the 48mm upside-down front fork by WP Suspension guarantee the best response and damping characteristics. In 2014, the fork has more reserves against bottoming out thanks to their optimized setting. Of course, compression and rebound damping can be adjusted to the track conditions and the rider's preferences with a twist of the wrist - the rear monoshock even has separate high and low speed adjustments. TRANSMISSION The 5-speed gear box has been adapted to the 350 SX-F's engine characterisitics and is distinguished by easy and precise shifting. CLUTCH The highly compact CSS (Coil Spring Steel) cltuch uses a wear-free steel basket and eight clutch plates which are extremely heat resistant due to their steel carrier discs. The Brembo hydraulic system with its new master cylinder provides easy and precise modulation. ENGINE MANAGEMENT SYSTEM (EMS) In combination with the revolutionary injector position as developed by KTM, the Keihin Engine Management System, with electronic fuel injection and 44mm throttle body provides the engine with a spontaneous response and maximum performance. For 2014, the wiring harness of the 350 SX-F has been further simplified and even higher quality wires and connectors are used. In order to protect them against pressure washers, many connectors are now enclosed in new rubber boots. With an optional map-select switch from the KTM PowerParts program, EMS continues to allow selecting different engine characteristics. In addition, the optional User-Setting Tool allows to readout engine data with a laptop and change the ignition and injection mappings with a few mouse clicks. CRANKS

2014 KTM SUPERDUKE

$5,299

Atlantic, Iowa

Year 2014

Make KTM

Model 350 SX-F

Category -

Engine -

Posted Over 1 Month

2014 KTM 350 SX-F, 2014 KTM 350 SX-F BENCHMARK In the three years since the revolutionary 350 SX-F has been introduced, this bike has proven that it is possible to win the MX1 World Championship even with reduced displacement. Since then, Tony Cairoli has clearly dominated the class with the 350 SX-F, and in 2013, the Italian once again bets on the ingenious combination of low-weight, playful agility and a high-revving engine. A unique recipe for success that benefits amateurs and pros alike. Features May Include: TRIPLE CLAMPS Top-quality, CNC-machined triple clamps have been something of a KTM trademark. Ensuring a precise handling, they perceptibly support the flex characteristics, and with it, the fork's action. SWINGARM Designed using the latest in calculation and simulation software, the design and wall thickness of the cast aluminum swingarm have been optimized for minimum weight at optimum stiffness and precisely defined flexibility provides perfect stability at minimum weight. For 2014, the engineers have revised the chain guide to increase reliability while lowering the weight. SUSPENSION/DAMPING The rear monoshock as well as the 48mm upside-down front fork by WP Suspension guarantee the best response and damping characteristics. In 2014, the fork has more reserves against bottoming out thanks to their optimized setting. Of course, compression and rebound damping can be adjusted to the track conditions and the rider's preferences with a twist of the wrist - the rear monoshock even has separate high and low speed adjustments. TRANSMISSION The 5-speed gear box has been adapted to the 350 SX-F's engine characterisitics and is distinguished by easy and precise shifting. CLUTCH The highly compact CSS (Coil Spring Steel) cltuch uses a wear-free steel basket and eight clutch plates which are extremely heat resistant due to their steel carrier discs. The Brembo hydraulic system with its new master cylinder provides easy and precise modulation. ENGINE MANAGEMENT SYSTEM (EMS) In combination with the revolutionary injector position as developed by KTM, the Keihin Engine Management System, with electronic fuel injection and 44mm throttle body provides the engine with a spontaneous response and maximum performance. For 2014, the wiring harness of the 350 SX-F has been further simplified and even higher quality wires and connectors are used. In order to protect them against pressure washers, many connectors are now enclosed in new rubber boots. With an optional map-select switch from the KTM PowerParts program, EMS continues to allow selecting different engine characteristics. In addition, the optional User-Setting Tool allows to readout engine data with a laptop and change the ignition and injection mappings with a few mouse clicks. CRANKS

2016 KTM 150 SX

$3,995

Davenport, Iowa

Year 2011

Make KTM

Model 350 SX-F

Category -

Engine 349.7 cc cc

Posted Over 1 Month

In 2006, Stefan Everts was reigning world champion (with a mere 14 victories in 15 Grand Prix) and then he became KTM Race Director. Back then, he could already see where the future of motocross was heading and in KTM he found an ideal partner for his vision: efficient and maximum practicable performance from smaller displacements in an overall package that's tailored unconditionally to the requirements of the rider. Four years or so later, it's ready: the new 350 SX-F. With a new engine, fuel injection system and smaller displacement, new bodywork, new chassis - in fact, a whole new concept. What with the first Grand Prix victory and racing to the top of the overall standings in the MX1 class after only two races, maybe even the beginning of a new era in motocross...

2015 KTM 350 XC-F

$6,499

Atlantic, Iowa

Year 2015

Make KTM

Model 350 XC-F

Category -

Engine -

Posted Over 1 Month

2015 KTM 350 XC-F, THIS PRE-OWNED BIKE IS AS CLOSE TO NEW AS YOU WILL FIND!! IT HAS LESS THAN 5 HOURS ON IT!! As you can see in the pictures, this bike looks like new showroom condition. 2015 KTM 350 XC-F BEST IN CLASS The 350 XC-F has taken Factory FMF/KTM rider Charlie Mullins to multiple National Enduro wins during the opening half of the 2013 season. His teammate Kailub Russell has matched his success on the 350cc machine with wins and a championship in the XC1 class in the GNCC series. Features May Include: Air Box The airbox design offers maximum protection of the air filter against dirt while ensuring maximum airflow for top performance. The Twin Air filter can be changed without tools in seconds, a standard for KTM. Handlebar All XC models are fitted with a new black anodized Neken tapered handlebar, with a bend that is specifically suited to the requirements of offroad while boasting superior quality and performance. The proven standard KTM mount allows the handlebar to be mounted in four different positions. A large Neken bar pad offers effective protection for the rider. Hand Protection And Grips Standard for all XC models, the hand guards use a new material for better impact resistance. New, softer two-compound grips are used on MY 2015 XC models for increased comfort and less stress on the rider s hands. Fuel Tank The XC s feature a large 2.6 gallon translucent fuel tank on the two stroke XC s and a 2.4 gallon translucent fuel tank on four strokes. The 1/4-turn fuel cap is easy to open and provides extremely quick refueling during a race. Graphics New graphics with clear lines visually underscore the exacting standards of what KTM deems a true, cutting-edge bike. Seat Ergonomically perfect, the seat has received an improved foam core, ensuring greater comfort and durability. Bodywork In shaping the bodywork the KTM designers ergonomic and design focus was to achieve complete harmony between rider and bike. The front fender is a prime example of a molded polymer component, gaining maximum stability through a well thought-out structure and mounting system. For MY 2015, the bodywork will have updated graphics to highlight the racing character of the MY 2015 XC range of cutting-edge offroad racing motorcycles. Wheels The 21in and 18in rims are now anodized in black for aggressive looks and use lightweight, CNC-machined hubs, high-end Giant rims and black spokes with lightweight silver aluminum nipples to achieve maximum stability at minimum weight. The wheels are fitted with the latest offroad tires from Dunlop, the GEOMAX AT81, which have been developed with the Factory FM

2017 Victory MAGNUM X-1

$6,499

Atlantic, Iowa

Year 2015

Make KTM

Model 350 XC-F

Category -

Engine -

Posted Over 1 Month

2015 KTM 350 XC-F, THIS PRE-OWNED BIKE IS AS CLOSE TO NEW AS YOU WILL FIND!! IT HAS LESS THAN 5 HOURS ON IT!! As you can see in the pictures, this bike looks like new showroom condition. 2015 KTM 350 XC-F BEST IN CLASS The 350 XC-F has taken Factory FMF/KTM rider Charlie Mullins to multiple National Enduro wins during the opening half of the 2013 season. His teammate Kailub Russell has matched his success on the 350cc machine with wins and a championship in the XC1 class in the GNCC series. Features May Include: Air Box The airbox design offers maximum protection of the air filter against dirt while ensuring maximum airflow for top performance. The Twin Air filter can be changed without tools in seconds, a standard for KTM. Handlebar All XC models are fitted with a new black anodized Neken tapered handlebar, with a bend that is specifically suited to the requirements of offroad while boasting superior quality and performance. The proven standard KTM mount allows the handlebar to be mounted in four different positions. A large Neken bar pad offers effective protection for the rider. Hand Protection And Grips Standard for all XC models, the hand guards use a new material for better impact resistance. New, softer two-compound grips are used on MY 2015 XC models for increased comfort and less stress on the rider s hands. Fuel Tank The XC s feature a large 2.6 gallon translucent fuel tank on the two stroke XC s and a 2.4 gallon translucent fuel tank on four strokes. The 1/4-turn fuel cap is easy to open and provides extremely quick refueling during a race. Graphics New graphics with clear lines visually underscore the exacting standards of what KTM deems a true, cutting-edge bike. Seat Ergonomically perfect, the seat has received an improved foam core, ensuring greater comfort and durability. Bodywork In shaping the bodywork the KTM designers ergonomic and design focus was to achieve complete harmony between rider and bike. The front fender is a prime example of a molded polymer component, gaining maximum stability through a well thought-out structure and mounting system. For MY 2015, the bodywork will have updated graphics to highlight the racing character of the MY 2015 XC range of cutting-edge offroad racing motorcycles. Wheels The 21in and 18in rims are now anodized in black for aggressive looks and use lightweight, CNC-machined hubs, high-end Giant rims and black spokes with lightweight silver aluminum nipples to achieve maximum stability at minimum weight. The wheels are fitted with the latest offroad tires from Dunlop, the GEOMAX AT81, which have been developed with the Factory FM

2014 KTM 105

$9,999

Grimes, Iowa

Year 2015

Make KTM

Model 350 EXC-F

Category -

Engine 349.7 cm³ cc

Posted Over 1 Month

Die 350 EXC-F is the ultimate enduro when it comes to optimum rideability and maximum enduro performance. Thanks to its compact, powerful DOHC engine, its low weight and perfectly tuned chassis, this machine overcomes all problems presented by the terrain with incredible ease. And thanks to its playful handling, it is always at an advantage when the going gets really tough. Whether professional or beginner, this benefits the rider all the more, the longer the track is. Maximum fun factor guaranteed!

2013 KTM 690 Duke

$9,999

Grimes, Iowa

Year 2015

Make KTM

Model 350 EXC-F

Category -

Engine 349.7 cm³ cc

Posted Over 1 Month

Die 350 EXC-F is the ultimate enduro when it comes to optimum rideability and maximum enduro performance. Thanks to its compact, powerful DOHC engine, its low weight and perfectly tuned chassis, this machine overcomes all problems presented by the terrain with incredible ease. And thanks to its playful handling, it is always at an advantage when the going gets really tough. Whether professional or beginner, this benefits the rider all the more, the longer the track is. Maximum fun factor guaranteed!

2016 Suzuki Motor Of America Inc. GSX-S1000

$9,299

Grimes, Iowa

Year 2016

Make KTM

Model 350 EXC-F

Category -

Engine 349.7 cm³ cc

Posted Over 1 Month

The 350 EXC-F is the ultimate machine when you want to ride your bike to the off-road trails. Thanks to its compact, powerful DOHC engine, low weight and perfectly tuned suspension, this machine masters each and every tough spot in off-road riding with ease. And thanks to its license plate, you can ride the bike right from your house and enjoy the street or the dirt. For 2016 the 350 EXC-F gets the same updates as the dirt-only XCF-W models for even more capability when the asphalt ends.

2017 KTM 350 XC-F

$9,999

Grimes, Iowa

Year 2016

Make KTM

Model 350 EXC-F

Category Dual Sport

Engine 349.7 cm³ cc

Posted Over 1 Month

The 350 EXC-F is the ultimate machine when you want to ride your bike to the off-road trails. Thanks to its compact, powerful DOHC engine, low weight and perfectly tuned suspension, this machine masters each and every tough spot in off-road riding with ease. And thanks to its license plate, you can ride the bike right from your house and enjoy the street or the dirt. For 2016 the 350 EXC-F gets the same updates as the dirt-only XCF-W models for even more capability when the asphalt ends.

2016 KTM 350 XC-F

$8,399

Grimes, Iowa

Year 2016

Make KTM

Model 350 XC-F

Category -

Engine 349.7 cm³ cc

Posted Over 1 Month

With the arrival of the new generation 350 XC-F the success story can continue. The nimble but powerful bike comprises of almost as much power as a 450, but with the agility of a 250 – so the basic idea is easily summarized, and has been a concept with success from the start.