Ktm Xc motorcycles for sale in Villa Park, Illinois

2008 Harley-Davidson VRSCDX/A - V-Rod Night Rod Special

$9,999

Villa Park, Illinois

Year 2017

Make KTM

Model 300 XC-W Six Days

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC-W Six Days, Check this one out, already accessorized for you to win that Enduro! 2017 KTM 300 XC-W Six Days SIX DAYS, SIX WINS KTM has ruled off-road for decades. The special edition SIX DAYS models celebrate this success with special performance upgrades and top-of-the-line components. In 2016 the ISDE (International Six Days Enduro) will be held in Navarra, Spain and the KTM model line-up has been suitably equipped to handle anything the dusty and rocky terrain can throw at it. Arriba! Features may include: FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a half of a pound lighter than its predecessor. ENGINE MANAGEMENT SYSTEM The state-of-the-art Keihin Engine Management System with electronic fuel injection features an all-new 42mm throttle body. Thanks to its unique injector position, the engine s response gives a whole new meaning to the word instantaneous . And to make life even easier, separate systems for cold starts and idle adjustment await you. Push the throttle back when the engine s alive and well, and the cold start mode disengages. As a proud owner of a SIX DAYS 4-stroke model you can select a stronger power curve and activate the unique traction control system for maximized grip. A bonus mapping via the map select switch on the handlebar, brings even more ferocity to the game. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 po

2017 KTM 250 XC-W

$8,899

Villa Park, Illinois

Year 2017

Make KTM

Model 250 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC-W, 2017 KTM 250 XC-W PYROTECHNICS When the smoke clears, you ll be the last rider standing. The new KTM 250 XC-W is one of the best pound-for-pound fighters in the world of Enduro, pummeling it s more complex 4-Stroke rivals. All muscle, no fat: this 2-stroke machine is as lean as it is powerful. Features may include: ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2-stroke symphony when you re on the pipe. CYLINDER The newly developed cylinder of the 250 XC-W, with a bore of 66.4mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2-stroke sym

2017 KTM 300 XC-W

$9,099

Villa Park, Illinois

Year 2017

Make KTM

Model 300 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC-W, 2017 KTM 300 XC-W MORE THAN JUST LIGHTNING FAST 4-stroke rivals, beware: this tool might just be the sharpest in the shed. It s hard to find a better power-to-weight ratio in the world of Enduro. If you want torque by the bucket loads, a top-end to die for and a lightweight chassis ready to rise to any occasion, give this 300 cc lightning bolt a go. Features may include: CYLINDER The newly developed cylinder of the 300 XC-W, with a bore of 72mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. BODYWORK KTM R&D, Kiska Design and the factory racers had their say in shaping the plastics with one goal: complete harmony between rider and bike. Perfect ergonomics and contact points provide maximum comfort in movement on the XC-W. The I-beam structures of the front and rear fenders guarantee maximum stability and a low weight thanks to well thought-out construction and mounting. They also stay cleaner for longer. Cleaver brake hose routing on the front number plate prevents wear and tear. GRAPHICS New graphics convey the true READY TO RACE character of the 2017 XC-W model line. AIRBOX The airbox design, featuring new snorkels, offers maximum protection of the air filter against soiling, while ensuring maximum airflow in a quiet way. The new, large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you can pop a fresh one in with a face full of mud - without tools and in seconds. FUEL TANK The lightweight polyethylene tank has a capacity of 2.5 gallons. You will always be able to see how much fuel remains at a glance, thanks to the see-through plastic. By pushing the orange release button in the center of the filler cap, the bayonet mechanism makes refueling quick and easy. WHEELS The XC-W s wheels feature lightweight, CNC machined hubs and high-end Giant rims guaranteeing maximum stability at minimum weight. The wheels are fitted with the latest Maxxis tires. The rear tire features a reworked profile and internal structure for better grip under wet conditions and is more resilient to punctures. Take them wherever you like, traction will be there. SEAT Tai

2017 KTM 150 XC-W

$7,999

Villa Park, Illinois

Year 2017

Make KTM

Model 150 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 150 XC-W, 2017 KTM 150 XC-W MINIMAL FUSS; MAXIMUM FUN XC means cross-country. W represents its wide-ratio transmission. KTM stands for winning. This model is a race-ready bike built for closed course enduro racing. With the agility of a 125 and enough muscle to take the fight to the 250 cc 4-Strokes, this bike punches well above its weight. That s why when the going gets tough, the tough get an XC-W. Features may include: WEIGHT REDUCTION The main target for the KTM engineers when developing the XC-W models was a massive weight reduction compared to the previous generation. The result: the current XC-W s are the slimmest, lightest bikes in the enduro segment. SWINGARM This updated design allows for an optimized mounting position of the PDS shock, providing more progressive action. Furthermore, the cast aluminum design guarantees lower weight and a perfect flex behavior. The single-component casting process also eliminates any inconsistencies and weak points. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated No Dirt footpegs prevent smudging up the pegs, even when digging in deep ruts. The pegs on the EXC models are 6mm higher than the ones used on SX models, which benefits ground clearance. But you can swap them at will. FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a

2017 KTM 150 SX

$9,099

Villa Park, Illinois

Year 2017

Make KTM

Model 300 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC-W, 2017 KTM 300 XC-W MORE THAN JUST LIGHTNING FAST 4-stroke rivals, beware: this tool might just be the sharpest in the shed. It s hard to find a better power-to-weight ratio in the world of Enduro. If you want torque by the bucket loads, a top-end to die for and a lightweight chassis ready to rise to any occasion, give this 300 cc lightning bolt a go. Features may include: CYLINDER The newly developed cylinder of the 300 XC-W, with a bore of 72mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. BODYWORK KTM R&D, Kiska Design and the factory racers had their say in shaping the plastics with one goal: complete harmony between rider and bike. Perfect ergonomics and contact points provide maximum comfort in movement on the XC-W. The I-beam structures of the front and rear fenders guarantee maximum stability and a low weight thanks to well thought-out construction and mounting. They also stay cleaner for longer. Cleaver brake hose routing on the front number plate prevents wear and tear. GRAPHICS New graphics convey the true READY TO RACE character of the 2017 XC-W model line. AIRBOX The airbox design, featuring new snorkels, offers maximum protection of the air filter against soiling, while ensuring maximum airflow in a quiet way. The new, large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you can pop a fresh one in with a face full of mud - without tools and in seconds. FUEL TANK The lightweight polyethylene tank has a capacity of 2.5 gallons. You will always be able to see how much fuel remains at a glance, thanks to the see-through plastic. By pushing the orange release button in the center of the filler cap, the bayonet mechanism makes refueling quick and easy. WHEELS The XC-W s wheels feature lightweight, CNC machined hubs and high-end Giant rims guaranteeing maximum stability at minimum weight. The wheels are fitted with the latest Maxxis tires. The rear tire features a reworked profile and internal structure for better grip under wet conditions and is more resilient to punctures. Take them wherever you like, traction will be there. SEAT Tai

2017 KTM 85 SX

$7,999

Villa Park, Illinois

Year 2017

Make KTM

Model 150 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 150 XC-W, 2017 KTM 150 XC-W MINIMAL FUSS; MAXIMUM FUN XC means cross-country. W represents its wide-ratio transmission. KTM stands for winning. This model is a race-ready bike built for closed course enduro racing. With the agility of a 125 and enough muscle to take the fight to the 250 cc 4-Strokes, this bike punches well above its weight. That s why when the going gets tough, the tough get an XC-W. Features may include: WEIGHT REDUCTION The main target for the KTM engineers when developing the XC-W models was a massive weight reduction compared to the previous generation. The result: the current XC-W s are the slimmest, lightest bikes in the enduro segment. SWINGARM This updated design allows for an optimized mounting position of the PDS shock, providing more progressive action. Furthermore, the cast aluminum design guarantees lower weight and a perfect flex behavior. The single-component casting process also eliminates any inconsistencies and weak points. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated No Dirt footpegs prevent smudging up the pegs, even when digging in deep ruts. The pegs on the EXC models are 6mm higher than the ones used on SX models, which benefits ground clearance. But you can swap them at will. FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a

2017 KTM 450 XC-F

$10,099

Villa Park, Illinois

Year 2017

Make KTM

Model 450 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 XC-F, 2017 KTM 450 XC-F Features may include: HOLESHOT BRAGGING RIGHTS If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015. AIRBOX The new airbox design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in conjunction with lighter intake snorkel that is made of a new material to reduce the deformation due to air intake pulse for improved performance. The new Twin Air filter is easier and safer to mount and can be changed without tools in seconds, a standard and original KTM feature. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For MY 2017 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. SEAT Ergonomically perfect, the new seat has a higher foam volume, which offers great comfort and durability, while weighing the same as the previous model. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling, and last but not least it´s lighter than the previous model. GRAPHICS New modern in-mold graphics highlight the Ready to Race character of the cutting-edge 2017 XC-F range of bikes. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. FOOTPEG A new sophisticated "No-Dirt" footpeg solution prevents dirt from blocking the pegs in order to keep them in the correct position, even when dragging in deep ruts. In addition, the new footpegs are larger, lighter and mor

2013 KTM 350 XCF-W

Request Price

Villa Park, Illinois

Year 2017

Make KTM

Model 450 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 XC-F, 2017 KTM 450 XC-F Features may include: HOLESHOT BRAGGING RIGHTS If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015. AIRBOX The new airbox design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in conjunction with lighter intake snorkel that is made of a new material to reduce the deformation due to air intake pulse for improved performance. The new Twin Air filter is easier and safer to mount and can be changed without tools in seconds, a standard and original KTM feature. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For MY 2017 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. SEAT Ergonomically perfect, the new seat has a higher foam volume, which offers great comfort and durability, while weighing the same as the previous model. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling, and last but not least it´s lighter than the previous model. GRAPHICS New modern in-mold graphics highlight the Ready to Race character of the cutting-edge 2017 XC-F range of bikes. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. FOOTPEG A new sophisticated "No-Dirt" footpeg solution prevents dirt from blocking the pegs in order to keep them in the correct position, even when dragging in deep ruts. In addition, the new footpegs are larger, lighter and mor

2017 KTM 250 XC

$8,899

Villa Park, Illinois

Year 2017

Make KTM

Model 250 XC

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC, 2017 KTM 250 XC UNRIVALLED 2-STROKE PERFORMANCE With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 250 XC has one of the best power-to-weight ratios in its class. The unrivalled performance of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2017 the 250 XC features gets an all new engine and chassis based on the ultimate 2-stroke motocrosser, the 250 SX. The cross-country world has a new premix king. Features may include: CYLINDER The cylinder of the 250 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference. CLUTCH The KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull. CARBURETOR The 250 XC is fitted with a proven Mikuni TMX 38 carburetor producing the perfect air-fuel mixture. For extreme temperature or altitude the setting can be tuned with supplied jets and needles according to a setting list in the manual. ENGINE The powerful KTM 250 XC engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. FRAME The modern frame design of the 250 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. LINKAGE/SHOCKABSORBER The linkage system of the 250 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences. FORK The XC model range features the 48mm WP AER 48 fork. The setting has been specifically developed for racing cross-country in the US. The forks can be easily adjusted for compression and rebound via the dials on the top of the fork tubes. TRIPLE CLAMPS Top quality, CNC-machined triple clamps have been something of a KTM trademark for years. Ensuring precise handling, they provide proper clamping force for correct flex characteristics, thus improving the action of the forks. For 2017 the upper triple clamp features a newly developed rubber damping system for the handlebar clamp in order to reduce the vibration levels felt through the handlebar. The clamps retain their forward and back adjustability for rider preference. GRAPHICS New modern in-mold grap

2017 KTM 250 XC-F

$8,999

Villa Park, Illinois

Year 2017

Make KTM

Model 250 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC-F, 2017 KTM 250 XC-F SMALL-BORE DOMINATION Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features may include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. CYLINDER & PISTON In the reworked and shorter cylinder that has a bore of 78 mm, is a weight-reduced, forged bridged box-type piston made by CP. It features a unique piston shape adapted to the new combustion chamber and stands out with its extra-rigid structure, combined with a low weight. The compression ratio is at 14.4:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. COUNTER BALANCER SHAFT In order to balance the mass-forces, the new 250 XC-F engine uses a multifunctional counter balance shaft that also drives the water pump and timing chain. It features new sprockets fitted to the new timing chain. ELECTRIC STARTER The new 250 XC-F is fitted with an electric starter as standard, which a clear advantage in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight-reduced starter drive guarantees more efficient and reliable starting. ENGINE CASES AND COVER The completely new design of the die-cast engine cases allowed for a much more centralized shaft configuration. The engine is now shorter by 20 mm, contributing to a much more centralized mass. Newly designed engine covers made of magnes

2016 KTM 500 EXC

$8,899

Villa Park, Illinois

Year 2017

Make KTM

Model 250 XC

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC, 2017 KTM 250 XC UNRIVALLED 2-STROKE PERFORMANCE With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 250 XC has one of the best power-to-weight ratios in its class. The unrivalled performance of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2017 the 250 XC features gets an all new engine and chassis based on the ultimate 2-stroke motocrosser, the 250 SX. The cross-country world has a new premix king. Features may include: CYLINDER The cylinder of the 250 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference. CLUTCH The KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull. CARBURETOR The 250 XC is fitted with a proven Mikuni TMX 38 carburetor producing the perfect air-fuel mixture. For extreme temperature or altitude the setting can be tuned with supplied jets and needles according to a setting list in the manual. ENGINE The powerful KTM 250 XC engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. FRAME The modern frame design of the 250 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. LINKAGE/SHOCKABSORBER The linkage system of the 250 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences. FORK The XC model range features the 48mm WP AER 48 fork. The setting has been specifically developed for racing cross-country in the US. The forks can be easily adjusted for compression and rebound via the dials on the top of the fork tubes. TRIPLE CLAMPS Top quality, CNC-machined triple clamps have been something of a KTM trademark for years. Ensuring precise handling, they provide proper clamping force for correct flex characteristics, thus improving the action of the forks. For 2017 the upper triple clamp features a newly developed rubber damping system for the handlebar clamp in order to reduce the vibration levels felt through the handlebar. The clamps retain their forward and back adjustability for rider preference. GRAPHICS New modern in-mold grap

2017 KTM 300 XC

$9,099

Villa Park, Illinois

Year 2017

Make KTM

Model 300 XC

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC, 2017 KTM 300 XC UNRIVALLED POWER-TO-WEIGHT RATIO With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 300 XC has one of the best power-to-weight ratios in it's class. The unrivalled power-to-weight ratio of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2017 the 300 XC features detail improvements and new colors and graphics, but basically retains the same chassis and engine specification as MY 2016. Features May Include: CYLINDER The cylinder of the 300 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference. Features may include: CLUTCH The KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull. CARBURETOR The 300 XC is fitted with a proven Mikuni TMX 38 carburetor producing the perfect air-fuel mixture. For extreme temperature or altitude the setting can be tuned with supplied jets and needles according to a setting list in the manual. ENGINE The powerful KTM 300 SX engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. FRAME The modern frame design of the 300 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. LINKAGE/SHOCKABSORBER The linkage system of the 300 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences. FORK The XC model range features the 48mm WP AER 48 fork. The setting has been specifically developed for racing cross-country in the US. The forks can be easily adjusted for compression and rebound via the dials on the top of the fork tubes. TRIPLE CLAMPS Top quality, CNC-machined triple clamps have been something of a KTM trademark for years. Ensuring precise handling, they provide proper clamping force for correct flex characteristics, thus improving the action of the forks. For 2017 the upper triple clamp features a newly developed rubber damping system for the handlebar clamp in order to reduce the vibration levels felt through the handlebar. The clamps retain their forward and back adjustability for rider preference. GR

2017 KTM 250 SX-F

$8,999

Villa Park, Illinois

Year 2017

Make KTM

Model 250 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC-F, 2017 KTM 250 XC-F SMALL-BORE DOMINATION Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features may include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. CYLINDER & PISTON In the reworked and shorter cylinder that has a bore of 78 mm, is a weight-reduced, forged bridged box-type piston made by CP. It features a unique piston shape adapted to the new combustion chamber and stands out with its extra-rigid structure, combined with a low weight. The compression ratio is at 14.4:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. COUNTER BALANCER SHAFT In order to balance the mass-forces, the new 250 XC-F engine uses a multifunctional counter balance shaft that also drives the water pump and timing chain. It features new sprockets fitted to the new timing chain. ELECTRIC STARTER The new 250 XC-F is fitted with an electric starter as standard, which a clear advantage in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight-reduced starter drive guarantees more efficient and reliable starting. ENGINE CASES AND COVER The completely new design of the die-cast engine cases allowed for a much more centralized shaft configuration. The engine is now shorter by 20 mm, contributing to a much more centralized mass. Newly designed engine covers made of magnes

2017 KTM 350 XC-F

$9,999

Villa Park, Illinois

Year 2017

Make KTM

Model 350 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 350 XC-F, 2017 KTM 350 XC-F THE ULTIMATE COMBINATION With the arrival of the new generation 350 XC-F the success story can continue. The nimble but powerful bike comprises of almost as much power as a 450, but with the agility of a 250 so the basic idea is easily summarized, and has been a concept with success from the start. Features may include: ENGINE The new DOHC (Double Overhead Camshaft) engine of the 350 XC-F features a completely new construction in order to make it even more compact and powerful than before. Fitted with the latest electronic fuel injection system, it has a very wide and usable power spread while still delivering high performance. The new design has made the engine 20 mm shorter than before, while reducing the weight by 2 lbs. CYLINDER HEAD The new cylinder head features an improved combustion chamber geometry, two overhead camshafts with a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and high-flow ports. In conjunction with new valve springs and retainers for the four lightweight titanium valves (intake 36.3 mm, exhaust 29.1 mm) the flow rate has been maximized for an optimal power band with more performance across the entire range, which peaks at 13,400 rpm. The peak performance now is at 58 hp. CYLINDER AND PISTON In the redesigned and shorter cylinder, with a bore of 88 mm, works a weight-reduced forged bridged box-type piston made by CP. Its new piston crown geometry is adapted to the new high-compression combustion chamber and stands out with its extra rigid structure and low weight. Thanks to the low oscillating masses, the engine is extremely lively. The compression ratio is 14:1. ELECTRIC STARTER The new 350 XC-F is fitted with an electric starter as standard, which a clear advantage when it comes to crunch time in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight reduced starter drive guarantees more efficient and reliable starting CLUTCH The highly compact CSS clutch (Coil Spring Steel) features a weight reduced, wear-free steel basket, and now seven instead of eight clutch plates, which are extremely heat resistant due to their steel carrier discs. In addition, a reworked inner hub and a pressure plate guarantees a better oil supply along with even better cooling of the clutch. A smaller master cylinder diameter of the Brembo hydraulic clutch system provides lighter pull and precise modulation CRANKSHAFT The new 350 XC-F's crankshaft is lighter and features a stiffer design than before. It utilizes a shorter connecting rod, contributing to the compact and light engine with a snappy power delivery. This design is a major prerequisite for the extremely high engine speed levels and the unrivalled maximum power of the 350 cm³ engine. Not only that, it enhances the engine's durabi

2016 KTM 300 XC-W

$8,699

Villa Park, Illinois

Year 2016

Make KTM

Model 300 XC-W

Category Dirt Bikes

Engine -

Posted Over 1 Month

2016 KTM 300 XC-W, 2016 KTM 300 XC-W Better Than Ever! The 300 XC-W has clearly proven what it can do in many offroad competitions. The combination of massive 2-stroke performance, unrivaled torque and a super agile chassis make it the first choice when the going gets really difficult. There is no better power-to-weight ratio on the market in a standard bike. The compact 2-stroke engine offers the strongest performance money can currently buy. A perfectly tuned exhaust control ensures a manageable power delivery, while the 6-speed gear box, specially geared for enduros, has always the right gear ratio on offer. With its enhanced cylinder head and reed valve, the 300 XC-W is better than ever. Features May Include: HANDLEBAR All XC-W models are fitted with super strong, tapered Neken handlebars made of high tensile aluminum alloy that can be mounted in four positions. Standard equipment hand guards made of a new 2-component polymer for durability and effective hand protection. OPTIMISED ENGINE The powerful KTM 300 XC-W engine fitted with 6-speed transmission and electric starter unites an unbeatable 2-Stroke power-to-weight ratio with outstanding performance and responsive handling. AIRBOX The air filter can be quickly replaced without the use of any tools, thanks to an ingenious airbox design guarantees optimum filter protection from flying dirt while creating maximum airflow for high performance. The airbox covers are manufactured in a 2-component process with in-mold graphics. In addition, two extra flaps on the left cover allow it to be secured with bolts if desired. COOLING SYSTEM The proven integrated KTM cooling system routes the coolant from the cylinder head through the frame triangle directly to the aluminum radiators made by WP. SUSPENSION/DAMPING The KTM 300 XC-W is fitted with a new front fork featuring newly designed fork boots with shorter offset, increased trail and a new suspension settings, optimally tuned to weight and engine. In addition, the fork features new fork guards allowing for easier cleaning. At the rear, a PDS shock absorber from WP Suspension works with a direct linkage to the upper side of the swingarm. A wide range of setting options for rebound damping and high- and low-speed compression damping are standard and can be adjusted to suit racing and trail conditions. FRAME The modern frame design of the 300 XC-W, comprising lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. This guarantees easy handling and precise steering behavior, as well as excellent ride stability. It clearly represents the benchmark in terms of weight and stability. Thanks to the frame design and the rear PDS damping system, impacts at the rear wheel are absorbed and dissipated optimally. For 2016 the frame is protected by a new, ro

Ktm Xc motorcycles for sale in Villa Park, Illinois

2008 Harley-Davidson VRSCDX/A - V-Rod Night Rod Special

2017 KTM 250 XC-W

2017 KTM 300 XC-W

2017 KTM 150 XC-W

2017 KTM 150 SX

2017 KTM 85 SX

2017 KTM 450 XC-F

2013 KTM 350 XCF-W

2017 KTM 250 XC

2017 KTM 250 XC-F

2016 KTM 500 EXC

2017 KTM 300 XC

2017 KTM 250 SX-F

2017 KTM 350 XC-F

2016 KTM 300 XC-W

Narrow Results

Current Search Reset All

ZIP Code

Year

Price

Options

Showcase Ads