2017 KTM 450 XC-F, 2017 KTM 450 XC-F with a CAMSO snow kit! Don't mind the pallet, we just don't have enough powder to play in unfortunately.. but whoever gets this will have plenty of powder to play in!!! 2017 KTM 450 XC-F Features may include: HOLESHOT BRAGGING RIGHTS If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015. AIRBOX The new airbox design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in conjunction with lighter intake snorkel that is made of a new material to reduce the deformation due to air intake pulse for improved performance. The new Twin Air filter is easier and safer to mount and can be changed without tools in seconds, a standard and original KTM feature. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For MY 2017 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. SEAT Ergonomically perfect, the new seat has a higher foam volume, which offers great comfort and durability, while weighing the same as the previous model. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling, and last but not least it´s lighter than the previous model. GRAPHICS New modern in-mold graphics highlight the Ready to Race character of the cutting-edge 2017 XC-F range of bikes. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. FOOTPEG A new sophisticated "
2017 KTM 300 XC, With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 300 XC has one of the best power-to-weight ratios in it's class. The unrivalled power-to-weight ratio of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2017 the 300 XC features detail improvements and new colors and graphics, but basically retains the same chassis and engine specification as MY 2016. 2017 KTM 300 XC UNRIVALLED POWER-TO-WEIGHT RATIO With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 300 XC has one of the best power-to-weight ratios in it's class. The unrivalled power-to-weight ratio of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2017 the 300 XC features detail improvements and new colors and graphics, but basically retains the same chassis and engine specification as MY 2016. Features May Include: CYLINDER The cylinder of the 300 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference. CLUTCH The KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull. CARBURETOR The 300 XC is fitted with a proven Mikuni TMX 38 carburetor producing the perfect air-fuel mixture. For extreme temperature or altitude the setting can be tuned with supplied jets and needles according to a setting list in the manual. ENGINE The powerful KTM 300 SX engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. FRAME The modern frame design of the 300 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. LINKAGE/SHOCKABSORBER The linkage system of the 300 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences. FORK The XC model range features the 48mm WP AER 48 fork. The setting has been specifically developed for racing cross-country in the US. The forks can be easily adjusted for compression and rebound via the dials on the top of the fork tube
2017 KTM 300 XC-W Six Days, KTM has ruled off-road for decades. The special edition SIX DAYS models celebrate this success with special performance upgrades and top-of-the-line components. In 2016 the ISDE (International Six Days Enduro) will be held in Navarra, Spain and the KTM model line-up has been suitably equipped to handle anything the dusty and rocky terrain can throw at it. Arriba! 2017 KTM 300 XC-W Six Days SIX DAYS, SIX WINS KTM has ruled off-road for decades. The special edition SIX DAYS models celebrate this success with special performance upgrades and top-of-the-line components. In 2016 the ISDE (International Six Days Enduro) will be held in Navarra, Spain and the KTM model line-up has been suitably equipped to handle anything the dusty and rocky terrain can throw at it. Arriba! Features may include: FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a half of a pound lighter than its predecessor. ENGINE MANAGEMENT SYSTEM The state-of-the-art Keihin Engine Management System with electronic fuel injection features an all-new 42mm throttle body. Thanks to its unique injector position, the engine s response gives a whole new meaning to the word instantaneous . And to make life even easier, separate systems for cold starts and idle adjustment await you. Push the throttle back when the engine s alive and well, and the cold start mode disengages. As a proud owner of a SIX DAYS 4-stroke model you can select a stronger power curve and activate the unique traction control system for maximized grip. A bonus mapping via the map select switch on the handlebar, brings even more ferocity to the game. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while maki
2017 KTM 300 XC, 2017 KTM 300 XC UNRIVALLED POWER-TO-WEIGHT RATIO With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 300 XC has one of the best power-to-weight ratios in it's class. The unrivalled power-to-weight ratio of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2017 the 300 XC features detail improvements and new colors and graphics, but basically retains the same chassis and engine specification as MY 2016. Features May Include: CYLINDER The cylinder of the 300 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference. CLUTCH The KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull. CARBURETOR The 300 XC is fitted with a proven Mikuni TMX 38 carburetor producing the perfect air-fuel mixture. For extreme temperature or altitude the setting can be tuned with supplied jets and needles according to a setting list in the manual. ENGINE The powerful KTM 300 SX engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. FRAME The modern frame design of the 300 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. LINKAGE/SHOCKABSORBER The linkage system of the 300 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences. FORK The XC model range features the 48mm WP AER 48 fork. The setting has been specifically developed for racing cross-country in the US. The forks can be easily adjusted for compression and rebound via the dials on the top of the fork tubes. TRIPLE CLAMPS Top quality, CNC-machined triple clamps have been something of a KTM trademark for years. Ensuring precise handling, they provide proper clamping force for correct flex characteristics, thus improving the action of the forks. For 2017 the upper triple clamp features a newly developed rubber damping system for the handlebar clamp in order to reduce the vibration levels felt through the handlebar. The clamps retain their forward and back adjustabili
2017 KTM 300 XC-W Six Days, 2017 KTM 300 XC-W Six Days SIX DAYS, SIX WINS KTM has ruled off-road for decades. The special edition SIX DAYS models celebrate this success with special performance upgrades and top-of-the-line components. In 2016 the ISDE (International Six Days Enduro) will be held in Navarra, Spain and the KTM model line-up has been suitably equipped to handle anything the dusty and rocky terrain can throw at it. Arriba! Features may include: FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a half of a pound lighter than its predecessor. ENGINE MANAGEMENT SYSTEM The state-of-the-art Keihin Engine Management System with electronic fuel injection features an all-new 42mm throttle body. Thanks to its unique injector position, the engine s response gives a whole new meaning to the word instantaneous . And to make life even easier, separate systems for cold starts and idle adjustment await you. Push the throttle back when the engine s alive and well, and the cold start mode disengages. As a proud owner of a SIX DAYS 4-stroke model you can select a stronger power curve and activate the unique traction control system for maximized grip. A bonus mapping via the map select switch on the handlebar, brings even more ferocity to the game. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. The orange coating truly makes it stand out; precisely what an engineering m
2016 KTM 250 XC, ONLY ONE(1) LEFT AT THIS PRICE!!! 2016 Motocross models on sale!!!! Sale pricing good until 11/30/2016. Sale pricing reflects any factory incentives available at the time of sale. 2016 KTM 250 XC Unrivalled 2-Stroke Perfromance With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 250 XC has one of the best power-to-weight ratios in it's class. The unrivalled performance of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2016 the 250 XC features detail improvements and new colors and graphics, but basically retains the same chassis and engine specification as MY 2015. Features May Include: ENGINE The powerful KTM 250 XC engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. CLUTCH The KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull. CYLINDER The cylinder of the 250 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference. LINKAGE/SHOCKABSORBER The linkage system of the 250 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences. FRAME The modern frame design of the 250 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. HANDLEBAR The 250 XC is equipped with a tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. A new, larger handlebar pad protects the rider in case of a crash. BODYWORK KTM engineers have focused on designing the bodywork ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail. The front fender is a perfect example of how molded plastic components can gain maximum stability with a well thought out structure. WHEELS The 250 XC is fitted with lightweight, CNC-machined hubs, high-end Giant rims and black spokes with lightweight aluminum nipples providing maximum
2016 KTM 350 XC-F, Sale pricing good until 11/30/2016. Sale pricing reflects any factory incentives available at the time of sale. 2016 KTM 350 XC-F The Ultimate Combination With the arrival of the new generation 350 XC-F the success story can continue. The nimble but powerful bike comprises of almost as much power as a 450, but with the agility of a 250 so the basic idea is easily summarized, and has been a concept with success from the start. Features May Include: ENGINE The new DOHC (Double Overhead Camshaft) engine of the 350 XC-F features a completely new construction in order to make it even more compact and powerful than before. Fitted with the latest electronic fuel injection system, it has a very wide and usable power spread while still delivering high performance. The new design has made the engine 20 mm shorter than before, while reducing the weight by 2 lbs. 350 SX-F ENGINE CASES AND COVERS The completely new design of the die-cast engine cases allowed for a much more centralized shaft configuration, raising the crankshaft by 6 mm closer to the bike's center of gravity. Newly designed engine covers made of magnesium feature an advanced surface structure, which reduce the wear caused by the rider's boots. ENGINE MANAGEMENT SYSTEM The completely reworked Keihin Engine Management System, with electronic fuel injection, features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For 2016 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. In addition the handlebar-mounted map switch allows easy selection of different maps and the activation of a launch control. FUEL TANK All XC-F models have new lightweight polyethylene tanks fitted with an integrated fue
2016 KTM 250 XC-F, ONLY ONE(1) AT THIS PRICE!!! 2016 Motocross models on sale!!!! Sale pricing good until 11/30/2016. Sale pricing reflects any factory incentives available at the time of sale. 2016 KTM 250 XC-F Small-Bore Domination Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features May Include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. ENGINE MANAGEMENT SYSTEM The completely reworked Keihin Engine Management System with electronic fuel injection features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed and weight-reduced Wave discs made by GALFER featuring improved heat resistance. Weight reduction is 63g on the front disc, and 32 g for the rear. This is the ultimate solution in braking technology. FUEL TANK All XC-F models have new lightweight polyethylene tanks fitted with an integrated fuel
2016 KTM 350 XC-F, 2016 Competition Models now on sale!!! Pricing good through 11/30/2016 Sale pricing reflects any factory incentives currently available. 2016 KTM 350 XC-F The Ultimate Combination With the arrival of the new generation 350 XC-F the success story can continue. The nimble but powerful bike comprises of almost as much power as a 450, but with the agility of a 250 so the basic idea is easily summarized, and has been a concept with success from the start. Features May Include: ENGINE The new DOHC (Double Overhead Camshaft) engine of the 350 XC-F features a completely new construction in order to make it even more compact and powerful than before. Fitted with the latest electronic fuel injection system, it has a very wide and usable power spread while still delivering high performance. The new design has made the engine 20 mm shorter than before, while reducing the weight by 2 lbs. 350 SX-F ENGINE CASES AND COVERS The completely new design of the die-cast engine cases allowed for a much more centralized shaft configuration, raising the crankshaft by 6 mm closer to the bike's center of gravity. Newly designed engine covers made of magnesium feature an advanced surface structure, which reduce the wear caused by the rider's boots. ENGINE MANAGEMENT SYSTEM The completely reworked Keihin Engine Management System, with electronic fuel injection, features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For 2016 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. In addition the handlebar-mounted map switch allows easy selection of different maps and the activation of a launch control. FUEL TANK All XC-F models have new lightweight polyethylene tanks fitt
2017 KTM 300 XC-W, 2017 KTM 300 XC-W MORE THAN JUST LIGHTNING FAST 4-stroke rivals, beware: this tool might just be the sharpest in the shed. It s hard to find a better power-to-weight ratio in the world of Enduro. If you want torque by the bucket loads, a top-end to die for and a lightweight chassis ready to rise to any occasion, give this 300 cc lightning bolt a go. Features may include: CYLINDER The newly developed cylinder of the 300 XC-W, with a bore of 72mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. BODYWORK KTM R&D, Kiska Design and the factory racers had their say in shaping the plastics with one goal: complete harmony between rider and bike. Perfect ergonomics and contact points provide maximum comfort in movement on the XC-W. The I-beam structures of the front and rear fenders guarantee maximum stability and a low weight thanks to well thought-out construction and mounting. They also stay cleaner for longer. Cleaver brake hose routing on the front number plate prevents wear and tear. GRAPHICS New graphics convey the true READY TO RACE character of the 2017 XC-W model line. AIRBOX The airbox design, featuring new snorkels, offers maximum protection of the air filter against soiling, while ensuring maximum airflow in a quiet way. The new, large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you can pop a fresh one in with a face full of mud - without tools and in seconds. FUEL TANK The lightweight polyethylene tank has a capacity of 2.5 gallons. You will always be able to see how much fuel remains at a glance, thanks to the see-through plastic. By pushing the orange release button in the center of the filler cap, the bayonet mechanism makes refueling quick and easy. WHEELS The XC-W s wheels feature lightweight, CNC machined hubs and high-end Giant rims guaranteeing maximum stability at minimum weight. The wheels are fitted with the latest Maxxis tires. The rear tire features a reworked profile and internal structure for better grip under wet conditions and is more resilient to punctures. Take them wherever you like, traction will be there. SEAT
2017 KTM 250 XC-W, Just received this awesome 2017 KTM 250 XC-W! Check out the video as well! 2017 KTM 250 XC-W PYROTECHNICS When the smoke clears, you ll be the last rider standing. The new KTM 250 XC-W is one of the best pound-for-pound fighters in the world of Enduro, pummeling it s more complex 4-Stroke rivals. All muscle, no fat: this 2-stroke machine is as lean as it is powerful. Features may include: ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2-stroke symphony when you re on the pipe. CYLINDER The newly developed cylinder of the 250 XC-W, with a bore of 66.4mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers o
2017 KTM 150 XC-W, The 2017 KTM's continue to impress with their innovative designs and pure performance. Check out the video walk around of this bike as well! 2017 KTM 150 XC-W MINIMAL FUSS; MAXIMUM FUN XC means cross-country. W represents its wide-ratio transmission. KTM stands for winning. This model is a race-ready bike built for closed course enduro racing. With the agility of a 125 and enough muscle to take the fight to the 250 cc 4-Strokes, this bike punches well above its weight. That s why when the going gets tough, the tough get an XC-W. Features may include: WEIGHT REDUCTION The main target for the KTM engineers when developing the XC-W models was a massive weight reduction compared to the previous generation. The result: the current XC-W s are the slimmest, lightest bikes in the enduro segment. SWINGARM This updated design allows for an optimized mounting position of the PDS shock, providing more progressive action. Furthermore, the cast aluminum design guarantees lower weight and a perfect flex behavior. The single-component casting process also eliminates any inconsistencies and weak points. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated No Dirt footpegs prevent smudging up the pegs, even when digging in deep ruts. The pegs on the EXC models are 6mm higher than the ones used on SX models, which benefits ground clearance. But you can swap them at will. FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state
2016 KTM 450 XC-W, 2016 KTM 450 XC-W The Benchmark The 450 XC-W is one of the most powerful enduro machines of its class. Combining low weight and high displacement, high-tech SOHC 4-stroke technology is the right choice for all who are looking for maximum performance. Features May Include: ENGINE Developed for tough off-road duty, the SOHC engine with 449.3cc is distinguished by an extremely compact design, easy maintenance and excellent durability at a minimal weight. Together with the Keihin EFI system, this provides unrivalled off-road specific performance and rideability. DDS CLUTCH The one-piece basket of the DDS clutch (damped diaphragm steel) is machined from solid high-tensile steel in one solid part together with the primary drive gear. This process guarantees unbeatable reliability and, together with the thin steel linings, contributes to the narrow engine width due to a compact rivet-less design. The diaphragm spring makes it possible to implement an additional rubber damping system inside the clutch hub, ensuring reliability for the transmission and excellent traction. Finally, the hydraulic clutch mechanism by Brembo in conjunction with the diaphragm spring provides a very light clutch operation and controllable modulation. ENGINE MANAGEMENT SYSTEM The Engine Management System by Keihin with electronic fuel injection via a 42mm throttle body ensures a snappy response and maximum engine performance. An oil-cooled 196 W alternator provides sufficient energy for the fuel injection, lighting and other electrical loads. With an optional map-select switch from the Power Parts program, the EMS can allow the rider to select different engine characteristics. In addition, the optional User-Setting-Tool provides the ability to readout engine data with a laptop and change the ignition and injection mapping with just a few mouse clicks. PISTON The lightweight, forged bridged box-type piston shares its high performance piston rings with the 450 SX-F. HANDLEBAR All XC-W models are fitted with super strong, tapered Neken handlebars made of high tensile aluminum alloy that can be mounted in four positions. Standard equipment hand guards made of a new 2-component polymer for durability and effective hand protection. COOLING SYSTEM The proven integrated KTM cooling system routes the coolant from the cylinder head through the frame triangle directly to the WP aluminum radiators. A radiator fan is standard equipment for the big displacement 450 XC-W. SUSPENSION/DAMPING The KTM 450 XC-W is fitted with a new front fork featuring newly designed fork boots with shorter offset, increased trail and a new suspension settings, optimally tuned to weight and engine. In addition, the fork features new fork guards allowing for easier cleaning. At the rear, a PDS shock absorber from WP Suspension works with a direct linkage to
