2016 KTM 250 XC-F, FRESH OFF COMPLETE CHASSIS AND ENGINE OVERHAUL. NEW TOP END AND ALL NEW BEARINGS, FRESH SUSPENSION REBUILD. CLEAN BIKE!! 2016 KTM 250 XC-F Small-Bore Domination Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features May Include: ENGINEThe new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders.ENGINE MANAGEMENT SYSTEMThe completely reworked Keihin Engine Management System with electronic fuel injection features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar.CYLINDER HEADThe centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm.BRAKESHigh-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed and weight-reduced Wave discs made by GALFER featuring improved heat resistance. Weight reduction is 63g on the front disc, and 32 g for the rear. This is the ultimate solution in braking technology.FUEL TANKAll XC-F models have new lightweight polyethylene tanks fitted with an integrated fuel pump system and capacity of 2.25 gallons. Inside thre
2017 KTM 250 XC, AIR FORK WAS JUST REBUILT 2017 KTM 250 XC UNRIVALLED 2-STROKE PERFORMANCE With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 250 XC has one of the best power-to-weight ratios in it's class. The unrivalled performance of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. Features may include: CYLINDERThe cylinder of the 250 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference.CLUTCHThe KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull.CARBURETORThe 250 XC is fitted with a proven Mikuni TMX 38 carburetor producing the perfect air-fuel mixture. For extreme temperature or altitude the setting can be tuned with supplied jets and needles according to a setting list in the manual.ENGINEThe powerful KTM 250 XC engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling.FRAMEThe modern frame design of the 250 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness.LINKAGE/SHOCKABSORBERThe linkage system of the 250 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences.FORKThe XC model range features the 48mm WP AER 48 fork. The setting has been specifically developed for racing cross-country in the US. The forks can be easily adjusted for compression and rebound via the dials on the top of the fork tubes.TRIPLE CLAMPSTop quality, CNC-machined triple clamps have been something of a KTM trademark for years. Ensuring precise handling, they provide proper clamping force for correct flex characteristics, thus improving the action of the forks. For 2017 the upper triple clamp features a newly developed rubber damping system for the handlebar clamp in order to reduce the vibration levels felt through the handlebar. The clamps retain their forward and back adjustability for rider preference.GRAPHICSNew modern in-mold graphics highlight the Ready to Race character of the
2017 KTM 250 XC-W, 2017 KTM 250 XC-W PYROTECHNICS When the smoke clears, you ll be the last rider standing. The new KTM 250 XC-W is one of the best pound-for-pound fighters in the world of Enduro, pummeling it s more complex 4-Stroke rivals. All muscle, no fat: this 2-stroke machine is as lean as it is powerful. Features may include: ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2-stroke symphony when you re on the pipe. CYLINDER The newly developed cylinder of the 250 XC-W, with a bore of 66.4mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2-stroke sym
2017 KTM 250 XC-F, 2017 KTM 250 XC-F SMALL-BORE DOMINATION Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features may include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. CYLINDER & PISTON In the reworked and shorter cylinder that has a bore of 78 mm, is a weight-reduced, forged bridged box-type piston made by CP. It features a unique piston shape adapted to the new combustion chamber and stands out with its extra-rigid structure, combined with a low weight. The compression ratio is at 14.4:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. COUNTER BALANCER SHAFT In order to balance the mass-forces, the new 250 XC-F engine uses a multifunctional counter balance shaft that also drives the water pump and timing chain. It features new sprockets fitted to the new timing chain. ELECTRIC STARTER The new 250 XC-F is fitted with an electric starter as standard, which a clear advantage in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight-reduced starter drive guarantees more efficient and reliable starting. ENGINE CASES AND COVER The completely new design of the die-cast engine cases allowed for a much more centralized shaft configuration. The engine is now shorter by 20 mm, contributing to a much more centralized mass. Newly designed engine covers made of ma
2017 KTM 250 XC, 2017 KTM 250 XC UNRIVALLED 2-STROKE PERFORMANCE With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 250 XC has one of the best power-to-weight ratios in its class. The unrivalled performance of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2017 the 250 XC features gets an all new engine and chassis based on the ultimate 2-stroke motocrosser, the 250 SX. The cross-country world has a new premix king. Features may include: CYLINDER The cylinder of the 250 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference. CLUTCH The KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull. CARBURETOR The 250 XC is fitted with a proven Mikuni TMX 38 carburetor producing the perfect air-fuel mixture. For extreme temperature or altitude the setting can be tuned with supplied jets and needles according to a setting list in the manual. ENGINE The powerful KTM 250 XC engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. FRAME The modern frame design of the 250 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. LINKAGE/SHOCKABSORBER The linkage system of the 250 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences. FORK The XC model range features the 48mm WP AER 48 fork. The setting has been specifically developed for racing cross-country in the US. The forks can be easily adjusted for compression and rebound via the dials on the top of the fork tubes. TRIPLE CLAMPS Top quality, CNC-machined triple clamps have been something of a KTM trademark for years. Ensuring precise handling, they provide proper clamping force for correct flex characteristics, thus improving the action of the forks. For 2017 the upper triple clamp features a newly developed rubber damping system for the handlebar clamp in order to reduce the vibration levels felt through the handlebar. The clamps retain their forward and back adjustability for rider preference. GRAPHICS New modern in-mold grap
2015 KTM 250 XC-F, 2015 KTM 250 XC-F XC-2 DOMINANCE Features May Include: ENGINE MANAGEMENT SYSTEM (EMS) In combination with the revolutionary injector position as developed by KTM, the Keihin Engine Management System with electronic fuel injection and 44mm throttle body provides spontaneous throttle response & the possibility to change characteristics or read engine data with the PowerParts User-Setting-Tool. With an optional map-select switch from the PowerParts program the EMS allows for selecting different engine characteristics. In addition, the optional User-Setting-Tool provides the ability to analyze engine data with a laptop and change the ignition and injection mappings with a few mouse clicks. CYLINDER HEAD The centerpiece of the compact DOHC engine is its cutting-edge cylinder head with two overhead camshafts and DLC-coated followers a design that allows to break the engine speed sound barrier of 14,000 rpm. CRANKSHAFT The 250 crankshaft employs a plain big end bearing. Two force-fitted bearing shells run directly on the crank pin. This design is a major prerequisite for the extremely high engine speed levels and the unrivaled maximum power of the 250cc engine. It enhances the engine s durability, allowing a longer interval between crankshaft service. BALANCER SHAFT In order to balance the mass-forces, the 250 engine uses a multifunctional counter balance shaft which also drives the water pump and timing chain. The engine receives a new water pump cover with a new gasket in order to optimize the seal. BODYWORK In shaping the bodywork the KTM designers ergonomic and design focus was to achieve complete harmony between rider and bike. The front fender is a prime example of a molded polymer component, gaining maximum stability through a well thought-out structure and mounting system. FUEL TANK The XC s feature a large 2.6 gallon translucent fuel tank on the two stroke XC s and a 2.4 gallon translucent fuel tank on four strokes. The 1/4-turn fuel cap is easy to open and provides extremely quick refueling during a race. AIR BOX The airbox design offers maximum protection of the air filter against dirt while ensuring maximum airflow for top performance. The Twin Air filter can be changed without tools in seconds, a standard for KTM. HAND PROTECTION AND GRIPS Standard for all XC models, the hand guards use a new material for better impact resistance. New, softer two-compound grips are used on MY 2015 XC models for increased comfort and less stress on the rider s hands. BRAKES High-Tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. Being the class-leading brakes in offroad, they remain unchanged for MY 2015. WHEELS
2016 Ktm 250 XC-W, VERY HARD TO GET RIGHT NOW!! EXCELLENT CONDITION - The Victory Machine An unbeatable power-to-weight ratio, low ownership costs as well as straightforward technology make the 250 XC-W the prime choice for extreme enduro racing. The cutting-edge engine is started effortlessly via electric starter and has been considered the most successful 2-stroke power plant on the market. Best-in-class enduro performance, a newly developed intake reed valve, the perfectly geared 6-speed transmission and enhanced DDS clutch make this engine the absolute top dog of its segment.
2016 KTM 250 XC-W, 2016 KTM 250 XC-W The Victory Machine An unbeatable power-to-weight ratio, low ownership costs as well as straightforward technology make the 250 XC-W the prime choice for extreme enduro racing. The cutting-edge engine is started effortlessly via electric starter and has been considered the most successful 2-stroke power plant on the market. Best-in-class enduro performance, a highly developed intake reed valve, the perfectly geared 6-speed transmission and the DDS clutch make this engine the absolute top of its segment. Features May Include: OPTIMISED ENGINE The powerful KTM 250 XC-W engine fitted with 6-speed transmission and electric starter unites an unbeatable 2-Stroke power-to-weight ratio with outstanding performance and responsive handling. HANDLEBAR All XC-W models are fitted with super strong, tapered Neken handlebars made of high tensile aluminum alloy that can be mounted in four positions. Standard equipment hand guards made of a new 2-component polymer for durability and effective hand protection. AIRBOX The air filter can be quickly replaced without the use of any tools, thanks to an ingenious airbox design guarantees optimum filter protection from flying dirt while creating maximum airflow for high performance. The airbox covers are manufactured in a 2-component process with in-mold graphics. In addition, two extra flaps on the left cover allow it to be secured with bolts if desired. SUSPENSION/DAMPING The KTM 250 XC-W is fitted with a new front fork featuring newly designed fork boots with shorter offset, increased trail and a new suspension settings, optimally tuned to weight and engine. In addition, the fork features new fork guards allowing for easier cleaning. At the rear, a PDS shock absorber from WP Suspension works with a direct linkage to the upper side of the swingarm. A wide range of setting options for rebound damping and high- and low-speed compression damping are standard and can be adjusted to suit racing and trail conditions. FRAME The modern frame design of the 250 XC-W, comprising lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. This guarantees easy handling and precise steering behavior, as well as excellent ride stability. It clearly represents the benchmark in terms of weight and stability. Thanks to the frame design and the rear PDS damping system, impacts at the rear wheel are absorbed and dissipated optimally. For 2016 the frame is protected by a new, robust skidplate. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. Being the class-leading brakes in off-road, they are unchanged for 2016. WHEELS The black colored al
2016 KTM 250 XC-F, 2016 KTM 250 XC-F Small-Bore Domination Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features May Include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. ENGINE MANAGEMENT SYSTEM The completely reworked Keihin Engine Management System with electronic fuel injection features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed and weight-reduced Wave discs made by GALFER featuring improved heat resistance. Weight reduction is 63g on the front disc, and 32 g for the rear. This is the ultimate solution in braking technology. FUEL TANK All XC-F models have new lightweight polyethylene tanks fitted with an integrated fuel pump system and capacity of 2.25 gallons. Inside threads on the filler cap make for an easy and reliable closure. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength
2016 KTM 250 XC, 2016 KTM 250 XC Unrivalled 2-Stroke Perfromance With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 250 XC has one of the best power-to-weight ratios in it's class. The unrivalled performance of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. For MY 2016 the 250 XC features detail improvements and new colors and graphics, but basically retains the same chassis and engine specification as MY 2015. Features May Include: ENGINE The powerful KTM 250 XC engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. CLUTCH The KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull. CYLINDER The cylinder of the 250 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference. LINKAGE/SHOCKABSORBER The linkage system of the 250 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences. FRAME The modern frame design of the 250 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. HANDLEBAR The 250 XC is equipped with a tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. A new, larger handlebar pad protects the rider in case of a crash. BODYWORK KTM engineers have focused on designing the bodywork ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail. The front fender is a perfect example of how molded plastic components can gain maximum stability with a well thought out structure. WHEELS The 250 XC is fitted with lightweight, CNC-machined hubs, high-end Giant rims and black spokes with lightweight aluminum nipples providing maximum stability at minimum weight. The latest Dunlop Geomax AT81 tires guarantee perfect traction and outstanding performance. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed
2013 KTM 250 XC, 2013 KTM 250 XC THE VICTORY MACHINE One of the most popular bikes for cross country racing is the 250 XC and for 2013 KTM has raised the bar to another level. It is a formidable weapon to combat the competition thanks to its incredible power combined with extremely low weight. Simply unbeatable in terms of power-to-weight ratio.
