2016 KTM 250 XC-F, FRESH OFF COMPLETE CHASSIS AND ENGINE OVERHAUL. NEW TOP END AND ALL NEW BEARINGS, FRESH SUSPENSION REBUILD. CLEAN BIKE!! 2016 KTM 250 XC-F Small-Bore Domination Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features May Include: ENGINEThe new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders.ENGINE MANAGEMENT SYSTEMThe completely reworked Keihin Engine Management System with electronic fuel injection features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar.CYLINDER HEADThe centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm.BRAKESHigh-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed and weight-reduced Wave discs made by GALFER featuring improved heat resistance. Weight reduction is 63g on the front disc, and 32 g for the rear. This is the ultimate solution in braking technology.FUEL TANKAll XC-F models have new lightweight polyethylene tanks fitted with an integrated fuel pump system and capacity of 2.25 gallons. Inside thre
2017 KTM 250 XC, AIR FORK WAS JUST REBUILT 2017 KTM 250 XC UNRIVALLED 2-STROKE PERFORMANCE With enough power to excel on all sorts of tracks and terrain, combined with an extremely lightweight chassis, the 250 XC has one of the best power-to-weight ratios in it's class. The unrivalled performance of the lightweight 2-stroke engine makes it a true contender against the more complex 4-strokes. Features may include: CYLINDERThe cylinder of the 250 XC is fitted with a sophisticated TVC (Twin Valve Control) power valve, providing adjustable power characteristics. The power character can be changed within a few seconds thanks to two supplied springs for different tracks and rider preference.CLUTCHThe KTM DDS (Damped Diaphragm Steel) clutch is fitted with a diaphragm spring, which allows implementation of an internal rubber damping system. Together with a lightweight steel basket and the Brembo hydraulic system the DDS clutch offers maximum reliability, excellent modulation and light lever pull.CARBURETORThe 250 XC is fitted with a proven Mikuni TMX 38 carburetor producing the perfect air-fuel mixture. For extreme temperature or altitude the setting can be tuned with supplied jets and needles according to a setting list in the manual.ENGINEThe powerful KTM 250 XC engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling.FRAMEThe modern frame design of the 250 XC, comprised of lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness.LINKAGE/SHOCKABSORBERThe linkage system of the 250 XC features a progressive curve with a high initial rate ensuring good stability. The high-end WP 5018 shock absorber guarantees outstanding response and damping characteristics. Compression and rebound damping can be adjusted to the track conditions and the rider's preferences.FORKThe XC model range features the 48mm WP AER 48 fork. The setting has been specifically developed for racing cross-country in the US. The forks can be easily adjusted for compression and rebound via the dials on the top of the fork tubes.TRIPLE CLAMPSTop quality, CNC-machined triple clamps have been something of a KTM trademark for years. Ensuring precise handling, they provide proper clamping force for correct flex characteristics, thus improving the action of the forks. For 2017 the upper triple clamp features a newly developed rubber damping system for the handlebar clamp in order to reduce the vibration levels felt through the handlebar. The clamps retain their forward and back adjustability for rider preference.GRAPHICSNew modern in-mold graphics highlight the Ready to Race character of the
2015 KTM 250 SX, VERY CLEAN BIKE!! NEW CHAIN AND SPROCKETS, NEW TIRES, FRESH SUSPENSION, NEW GRIPS, FMF TITANIUM SILENCER, ENDURO ENGINEERING ALUMINUM HAND HOLD! 2015 KTM 250 SX POWER UP The 250 SX is regarded as the motocross motorcycle with the best power-to-weight ratio. The lightweight 2-stroke engine scores highly with unrivalled performance packed in an extremely light chassis a formidable rival for the costlier 4-stroke competitors. Features May Include: Bodywork KTM engineers have focussed on designing the bodywork ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail. The front fender is a perfect example of how moulded plastic components can gain maximum stability with a well thought out structure and well-conceived attachment. Seat The ergonomically perfectly designed seat is equipped with a durable foam core, ensuring both greater comfort and higher stability. Airbox At the same time, the design of the airbox guarantees optimum protection of the air filter from dirt plus maximum air throughput for the highest performance. Quick replacement of the twin-air filter - without tools and in a matter of seconds - has long since been an unrivalled KTM standard. Fuel Tank All models in the SX range are equipped with a 7.5 liter, lightweight polyethylene fuel tank. Handlebar All SX models are equipped with the extremely sturdy, tapered Renthal Fatbar 827 handlebar that features an offset specially designed to meet the demands of motocross. In accordance with the proven KTM standard, the handlebar can be fixed in a choice of four positions. For MY 2015, it is equipped with softer two-component grips to spare the rider's hands. Wheels The wheels fitted for MY 2015 feature black coated, high-end Excel rims with lightweight, CNC-machined hubs and spokes with lightweight aluminium nipples, allowing highest levels of stability to be achieved, while keeping weight to a minimum. New Dunlop Geomax MX 52 tires were developed in collaboration with the KTM USA factory team and offer perfect traction with top performance. The new rear sprockets save 50 grams in unsprung mass. Brakes High-tech brakes from Brembo have always been standard equipment on KTM offroad bikes and, together with the lightweight Galfer Wave brake discs, they are the measure of all things in terms of brake technology. As the best brakes in the motocross class, they remain unchanged for MY 2015. Engine The powerful KTM 250 SX engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. Clutch A new DDS clutch (Damped Diaphragm Steel) with diaphragm spring and wear-free steel cage is fitted to the
2015 KTM 250 SX, VERY CLEAN BIKE!! NEW CHAIN AND SPROCKETS, NEW TIRES, FRESH SUSPENSION, NEW GRIPS, FMF TITANIUM SILENCER, ENDURO ENGINEERING ALUMINUM HAND HOLD! 2015 KTM 250 SX POWER UP The 250 SX is regarded as the motocross motorcycle with the best power-to-weight ratio. The lightweight 2-stroke engine scores highly with unrivalled performance packed in an extremely light chassis a formidable rival for the costlier 4-stroke competitors. Features May Include: Bodywork KTM engineers have focussed on designing the bodywork ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail. The front fender is a perfect example of how moulded plastic components can gain maximum stability with a well thought out structure and well-conceived attachment. Seat The ergonomically perfectly designed seat is equipped with a durable foam core, ensuring both greater comfort and higher stability. Airbox At the same time, the design of the airbox guarantees optimum protection of the air filter from dirt plus maximum air throughput for the highest performance. Quick replacement of the twin-air filter - without tools and in a matter of seconds - has long since been an unrivalled KTM standard. Fuel Tank All models in the SX range are equipped with a 7.5 liter, lightweight polyethylene fuel tank. Handlebar All SX models are equipped with the extremely sturdy, tapered Renthal Fatbar 827 handlebar that features an offset specially designed to meet the demands of motocross. In accordance with the proven KTM standard, the handlebar can be fixed in a choice of four positions. For MY 2015, it is equipped with softer two-component grips to spare the rider's hands. Wheels The wheels fitted for MY 2015 feature black coated, high-end Excel rims with lightweight, CNC-machined hubs and spokes with lightweight aluminium nipples, allowing highest levels of stability to be achieved, while keeping weight to a minimum. New Dunlop Geomax MX 52 tires were developed in collaboration with the KTM USA factory team and offer perfect traction with top performance. The new rear sprockets save 50 grams in unsprung mass. Brakes High-tech brakes from Brembo have always been standard equipment on KTM offroad bikes and, together with the lightweight Galfer Wave brake discs, they are the measure of all things in terms of brake technology. As the best brakes in the motocross class, they remain unchanged for MY 2015. Engine The powerful KTM 250 SX engine unites an unbeatable power-to-weight ratio with outstanding performance and extremely easy handling. Clutch A new DDS clutch (Damped Diaphragm Steel) with diaphragm spring and wear-free steel cage is fitted to the
The 250 SX is regarded as the motocross motorcycle with the best power-to-weight ratio. The lightweight 2-stroke engine scores highly with unrivalled performance packed in an extremely light chassis – a formidable rival for the costlier 4-stroke competitors.
2016 Ktm 250 XC-W, VERY HARD TO GET RIGHT NOW!! EXCELLENT CONDITION - The Victory Machine An unbeatable power-to-weight ratio, low ownership costs as well as straightforward technology make the 250 XC-W the prime choice for extreme enduro racing. The cutting-edge engine is started effortlessly via electric starter and has been considered the most successful 2-stroke power plant on the market. Best-in-class enduro performance, a newly developed intake reed valve, the perfectly geared 6-speed transmission and enhanced DDS clutch make this engine the absolute top dog of its segment.
