Ktm 250 motorcycles for sale in Atlantic, Iowa

2009 KTM 250 XC-W

$2,999

Atlantic, Iowa

Year 2009

Make KTM

Model 250 XC-W

Category -

Engine -

Posted Over 1 Month

2009 KTM 250 XC-W, This older KTM is in very good conditionfor it's age!!! Looks and runs great!Guided by expert hands, the 250 XC-W can easily take on any 450 four-stroke. Its low maintenance requirements and light weight makes this motorcycle the first choice of obsessive perfectionists. Also here the new cylinder delivers even more draft and top performance. DIMENSIONS WEIGHT 223.98 lbs. (101.6 kg)(without fuel) GROUND CLEARANCE 15.16 in. (385 mm) unloaded WHEELBASE 58.07 ± 0.39 in. (1,475 ± 10 mm) SEAT HEIGHT 38.78 in. (985 mm) ENGINE ENGINE 1-cylinder, 2-stroke, TVC 2-valve control DISPLACEMENT 249 cc BORE X STROKE 2.61 x 2.83 in. (66.4 x 72 mm) CARBURETION Keihin PWK 36 S AG FUEL TANK CAPACITY 2.9 gal. (11 l) IGNITION Kokusan digital 2K-3 STARTING Kick-start & e-start CLUTCH Wet multi-disc, operated hydraulically COOLING Liquid-cooled LUBRICATION Mixture oil 1:60 DRIVETRAIN TRANSMISSION 5-gears wide-ratio PRIMARY DRIVE 26:72 FINAL DRIVE 13:50 BRAKES/WHEELS/TIRES BRAKES Front: Brembo 2-piston, 10.24 in. (260 mm) disc Rear: Brembo 1-piston, 8.66 in. (220 mm) disc TIRES Front: 80/100-21 in. Rear: 110/100-18 in. OPERATIONAL FRAME Central double-cradle-type 25CrMo4 Subframe: Aluminum 7020, removable SUSPENSION Front: 1.89 in. (48 mm) WP USD; 11.81 in. (300 mm) travel Rear: WP monoshock PDS; 13.19 in. (335 mm) travel RA

2012 KTM 250 SX F

$3,499

Atlantic, Iowa

Year 2012

Make KTM

Model 250 SX F

Category -

Engine -

Posted Over 1 Month

2012 KTM 250 SX F, 2012 KTM 250 SX F The KTM 250 SX-F has been an established force in the MX2 World Championship for 8 years now. And the new generation appears with a completely new, even lighter engine and an updated injection system. In other words: a performance package that will redefine the MX2 class. Together with a new frame and new bodywork, the new 2013 KTM 250 SX-F is a winning bike that dominates the MX2 class.

2016 KTM 250 XC-F

$6,599

Atlantic, Iowa

Year 2016

Make KTM

Model 250 XC-F

Category -

Engine -

Posted Over 1 Month

2016 KTM 250 XC-F, 2016 KTM 250 XC-F Small-Bore Domination Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features May Include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. ENGINE MANAGEMENT SYSTEM The completely reworked Keihin Engine Management System with electronic fuel injection features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed and weight-reduced Wave discs made by GALFER featuring improved heat resistance. Weight reduction is 63g on the front disc, and 32 g for the rear. This is the ultimate solution in braking technology. FUEL TANK All XC-F models have new lightweight polyethylene tanks fitted with an integrated fuel pump system and capacity of 2.25 gallons. Inside threads on the filler cap make for an easy and reliable closure. HANDLEBAR The new generation X

2017 KTM 250 SX-F Factory Edition

$9,499

Atlantic, Iowa

Year 2017

Make KTM

Model 250 SX-F Factory Edition

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 SX-F Factory Edition, 2017 KTM 450 SX-F Factory Edition THE WHIP The 250 SX-F Factory Edition, the lightest and best performing bike in its class, is the right choice for both amateur and professional riders. The combination of a powerful and torquey engine in a lightweight and agile chassis is key to its success. A 14.000 rpm redline, factory spec WP AER 48 forks, orange anodized triple clamps and sprocket, an FMF muffler, launch control and Excel rims: this small bore superstar based on the prestigious 250 SX-F has what it takes to take on the big guns. And take them out. Features may include: ENGINE The new 250 SX-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 1,1 kg, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 SX-F a winner for both amateur and professional riders. ELECTRIC STARTER The new 250 SX-F is fitted with an electric starter as standard, which a clear advantage in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight-reduced starter drive guarantees more efficient and reliable starting. TRANSMISSION The new engine is fitted with an all-new and weight reduced, 5-speed gearbox. It features the same gear ratios as the previous model, but has wider gears that feature a special surface treatment on the 2nd, 3rd and 4th gears for improved reliability. One of the new and special features on the bike is an advanced "NO-DIRT" shift lever design, which prevents dirt from blocking the joint of the lever and guarantees safe shifting of the transmission. ENGINE MANAGEMENT SYSTEM The completely reworked Keihin Engine Management System, with electronic fuel injection, features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with different maps according to the gear sensor selection. In addition, the rider can activate optional maps for a different power delivery via the map select switch on the handlebar. CRANKSHAFT The new 250 SX-F's crankshaft features a stiffer design and employs a 6 mm shorter connecting rod, contributing to the compact and light engine with a snappy power delivery. A plain big end bearing features two force-fitted bearing shells run directly on the crank pin. This design is a major prerequisite for the extremely high engi

2017 KTM 250 SX-F

$8,499

Atlantic, Iowa

Year 2017

Make KTM

Model 250 SX-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 SX-F, 2017 KTM 250 SX-F SMALL-BORE SUSPERSTAR The 250 SX-F has been on top of the MX2 World Championship for many years now and added a second AMA Supercross Lites Championship to its crowded trophy cabinet. But that s no surprise. The successful combination of a powerful and torquey engine in a lightweight and agile ch***is is bound to place the 250 SX-F onto podium after podium. Features may include: 98.2 KG The main target for the KTM engineers when developing the SX models was a m***ive weight reduction compared to the previous generation. The result: the current SX-F models are the slimmest, lightest bikes on the track. Even though the 4-strokes are equipped with an electric starter as a standard feature, while the competition still needs to be kick started, the SX-F line weigh in pounds less. Rather than kicking to start - you can focus on kicking ***. AIRBOX The airbox design offers maximum protection of the air filter while ensuring maximum airflow. The large twin-air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple you could still pop a fresh one in with a face full of mud. Without tools. In seconds. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated ´No Dirt´ footpegs prevent clogging of the footpeg pivot, even when digging in deep ruts. Looking for a higher riding position? Then just mount the footpegs of the MY2017 EXC models, which are 6mm higher than the SX versions. SWINGARM The cast aluminum design offers low weight and a perfect flex behavior. The single-component casting process eliminates any inconsistencies and inherent weak points created by welding. It s better looking as well. HANDLEBAR KTM engineers sure know how to handle handlebars. This tapered one, made of high-strength aluminum by NEKEN, is fixed in damped rubber mounts and has two different positions. From 2017 onwards, the lower handlebar

2017 KTM 250 EXC-F

$9,399

Atlantic, Iowa

Year 2017

Make KTM

Model 250 EXC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 EXC-F, 2017 KTM 250 EXC-F A RECIPE FOR SUCCESS Fill an agile, state-of-the-art ch***is with an engine delivering cl***-leading power and torque. Then dress it with top cl*** components, ensuring that the lively little 4-stroke maintains its edge over the competition. Finished. First. And it s easy on the stomach for amateur explorers, while still satisfying fame-hungry pros. Eat that, adversaries. Features may include: WEIGHT REDUCTION The main target for the KTM engineers when developing the EXC models was a m***ive weight reduction compared to the previous generation. The result: the current EXCs are the slimmest, lightest bikes in the Enduro scene, even though the engines are equipped with an electric starter as a standard feature, while the competition still needs to be kick-started. You can just focus on kicking ***. SWINGARM This updated design allows for an optimized mounting position of the PDS shock, providing more progressive action. Furthermore, the cast aluminum design guarantees lower weight and a perfect flex behavior. The single-component casting process also eliminates any inconsistencies and weak points. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated No Dirt footpegs prevent jamming up of the pegs, even when digging in deep ruts. The pegs on the EXC models are 6mm higher than the ones used on SX models, which benefits ground clearance. But you can swap them at will. FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materi

2017 KTM 450 EXC-F Six Days

$9,399

Atlantic, Iowa

Year 2017

Make KTM

Model 250 EXC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 EXC-F, 2017 KTM 250 EXC-F A RECIPE FOR SUCCESS Fill an agile, state-of-the-art ch***is with an engine delivering cl***-leading power and torque. Then dress it with top cl*** components, ensuring that the lively little 4-stroke maintains its edge over the competition. Finished. First. And it s easy on the stomach for amateur explorers, while still satisfying fame-hungry pros. Eat that, adversaries. Features may include: WEIGHT REDUCTION The main target for the KTM engineers when developing the EXC models was a m***ive weight reduction compared to the previous generation. The result: the current EXCs are the slimmest, lightest bikes in the Enduro scene, even though the engines are equipped with an electric starter as a standard feature, while the competition still needs to be kick-started. You can just focus on kicking ***. SWINGARM This updated design allows for an optimized mounting position of the PDS shock, providing more progressive action. Furthermore, the cast aluminum design guarantees lower weight and a perfect flex behavior. The single-component casting process also eliminates any inconsistencies and weak points. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated No Dirt footpegs prevent jamming up of the pegs, even when digging in deep ruts. The pegs on the EXC models are 6mm higher than the ones used on SX models, which benefits ground clearance. But you can swap them at will. FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materi

2015 KTM 1190 ADVENTURE R

$7,699

Atlantic, Iowa

Year 2017

Make KTM

Model 250 SX

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 SX, 2017 KTM 250 SX LEADER OF THE PACK The new KTM 250 SX with its all-new engine has one of the best power-to-weight ratios in the world of dirt, forming the ultimate weapon against more complex 4-stroke rivals. With the grunt to devour all sorts of tracks and terrains, and a lightweight chassis keen to skim the surface, this masterpiece of KTM s R&D and Motorsport departments is born to lead the next pack of winners that prefer premix. Features may include: ENGINE The engine of the 250 SX has been known and respected for being the most powerful 2-stroke engine in its class. But we thought the segment could use an extra push and a solid statement: 2-strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity see to that. Putting our money where our mouth is, we gave the 250 SX engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counter balance shaft for less engine vibrations, a 5-speed transmission and a hydraulically operated DDS clutch. This compact firecracker truly outshines the competition with its ripping performance and is the right choice for lovers of low purchasing and maintenance costs. Oh, and of course don t forget that belly tingling 2-stroke symphony when you re on the pipe. CYLINDER The newly developed cylinder of the 250 SX - with a bore of 66.4mm - has all-new ports and is fitted with an overhauled power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s mood in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via lightweight head stays. Yes, this is a serious piece of kit. ENGINE CASES These all-new die-cast engine cases feature a 8mm higher clutch shaft and a 27mm higher crankshaft, resulting in better mass centralization. Which is nice if you care about sweet rideability. In addition, it allows the implementation of a counter balance shaft. So your ride will be as relaxed as it is rapid. Plus, your new favorite engine will keep looking as fresh as the day you bought it: redesigned engine covers feature a smart surface structure in order to reduce the wear caused by the rider s boots. CLUTCH The 250 SX employs the KTM-developed DDS clutch (damped diaphragm steel) with a wear-free steel basket and extremely heat resistant clutch plates. This clever design employs a diaphragm spring instead of the

2017 KTM 250 SX

$7,699

Atlantic, Iowa

Year 2017

Make KTM

Model 250 SX

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 SX, 2017 KTM 250 SX LEADER OF THE PACK The new KTM 250 SX with its all-new engine has one of the best power-to-weight ratios in the world of dirt, forming the ultimate weapon against more complex 4-stroke rivals. With the grunt to devour all sorts of tracks and terrains, and a lightweight chassis keen to skim the surface, this masterpiece of KTM s R&D and Motorsport departments is born to lead the next pack of winners that prefer premix. Features may include: ENGINE The engine of the 250 SX has been known and respected for being the most powerful 2-stroke engine in its class. But we thought the segment could use an extra push and a solid statement: 2-strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity see to that. Putting our money where our mouth is, we gave the 250 SX engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counter balance shaft for less engine vibrations, a 5-speed transmission and a hydraulically operated DDS clutch. This compact firecracker truly outshines the competition with its ripping performance and is the right choice for lovers of low purchasing and maintenance costs. Oh, and of course don t forget that belly tingling 2-stroke symphony when you re on the pipe. CYLINDER The newly developed cylinder of the 250 SX - with a bore of 66.4mm - has all-new ports and is fitted with an overhauled power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s mood in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via lightweight head stays. Yes, this is a serious piece of kit. ENGINE CASES These all-new die-cast engine cases feature a 8mm higher clutch shaft and a 27mm higher crankshaft, resulting in better mass centralization. Which is nice if you care about sweet rideability. In addition, it allows the implementation of a counter balance shaft. So your ride will be as relaxed as it is rapid. Plus, your new favorite engine will keep looking as fresh as the day you bought it: redesigned engine covers feature a smart surface structure in order to reduce the wear caused by the rider s boots. CLUTCH The 250 SX employs the KTM-developed DDS clutch (damped diaphragm steel) with a wear-free steel basket and extremely heat resistant clutch plates. This clever design employs a diaphragm spring instead of the

2017 KTM 250 XC-W

$8,899

Atlantic, Iowa

Year 2017

Make KTM

Model 250 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC-W, 2017 KTM 250 XC-W PYROTECHNICS When the smoke clears, you ll be the last rider standing. The new KTM 250 XC-W is one of the best pound-for-pound fighters in the world of Enduro, pummeling it s more complex 4-Stroke rivals. All muscle, no fat: this 2-stroke machine is as lean as it is powerful. Features may include: ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2-stroke symphony when you re on the pipe. CYLINDER The newly developed cylinder of the 250 XC-W, with a bore of 66.4mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2

2017 KTM 250 XC-W

$8,899

Atlantic, Iowa

Year 2017

Make KTM

Model 250 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC-W, 2017 KTM 250 XC-W PYROTECHNICS When the smoke clears, you ll be the last rider standing. The new KTM 250 XC-W is one of the best pound-for-pound fighters in the world of Enduro, pummeling it s more complex 4-Stroke rivals. All muscle, no fat: this 2-stroke machine is as lean as it is powerful. Features may include: ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2-stroke symphony when you re on the pipe. CYLINDER The newly developed cylinder of the 250 XC-W, with a bore of 66.4mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. ENGINE The engine of the 250 XC-W has been known and respected for being the most powerful 2-stroke engine in its class. It s obvious that 2-Strokes have a future at KTM. Their outstanding power-to-weight ratio, low cost and simplicity make them a viable alternative to more complicated and expensive 4-Strokes. Putting our money where our mouth is, we gave the 250 XC-W engine an all new architecture with a new shaft arrangement for better mass centralization, a new cylinder with twin-valve controlled power valve, a new counterbalancer shaft for less engine vibrations, a new electric starter, a 6-speed wide-ratio transmission and a hydraulically operated DDS clutch. This compact powerplant truly outshines the competition with its ripping performance and is the right choice for lovers of low purchase and maintenance costs. Oh, and of course don t forget that 2

2009 KTM 1190 RC8

$8,499

Atlantic, Iowa

Year 2017

Make KTM

Model 250 SX-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 SX-F, 2017 KTM 250 SX-F SMALL-BORE SUSPERSTAR The 250 SX-F has been on top of the MX2 World Championship for many years now and added a second AMA Supercross Lites Championship to its crowded trophy cabinet. But that s no surprise. The successful combination of a powerful and torquey engine in a lightweight and agile ch***is is bound to place the 250 SX-F onto podium after podium. Features may include: 98.2 KG The main target for the KTM engineers when developing the SX models was a m***ive weight reduction compared to the previous generation. The result: the current SX-F models are the slimmest, lightest bikes on the track. Even though the 4-strokes are equipped with an electric starter as a standard feature, while the competition still needs to be kick started, the SX-F line weigh in pounds less. Rather than kicking to start - you can focus on kicking ***. AIRBOX The airbox design offers maximum protection of the air filter while ensuring maximum airflow. The large twin-air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple you could still pop a fresh one in with a face full of mud. Without tools. In seconds. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. FOOTPEGS Sophisticated ´No Dirt´ footpegs prevent clogging of the footpeg pivot, even when digging in deep ruts. Looking for a higher riding position? Then just mount the footpegs of the MY2017 EXC models, which are 6mm higher than the SX versions. SWINGARM The cast aluminum design offers low weight and a perfect flex behavior. The single-component casting process eliminates any inconsistencies and inherent weak points created by welding. It s better looking as well. HANDLEBAR KTM engineers sure know how to handle handlebars. This tapered one, made of high-strength aluminum by NEKEN, is fixed in damped rubber mounts and has two different positions. From 2017 onwards, the lower handlebar

2016 KTM 65 SX

$8,999

Atlantic, Iowa

Year 2017

Make KTM

Model 250 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC-F, 2017 KTM 250 XC-F SMALL-BORE DOMINATION Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features may include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. CYLINDER & PISTON In the reworked and shorter cylinder that has a bore of 78 mm, is a weight-reduced, forged bridged box-type piston made by CP. It features a unique piston shape adapted to the new combustion chamber and stands out with its extra-rigid structure, combined with a low weight. The compression ratio is at 14.4:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. COUNTER BALANCER SHAFT In order to balance the mass-forces, the new 250 XC-F engine uses a multifunctional counter balance shaft that also drives the water pump and timing chain. It features new sprockets fitted to the new timing chain. ELECTRIC STARTER The new 250 XC-F is fitted with an electric starter as standard, which a clear advantage in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight-reduced starter drive guarantees more efficient and reliable starting. ENGINE CASES AND COVER The completely new design of the die-cast engine cases allowed for a much more centralized shaft configuration. The engine is now shorter by 20 mm, contributin

2017 KTM 250 XC-F

$8,999

Atlantic, Iowa

Year 2017

Make KTM

Model 250 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC-F, 2017 KTM 250 XC-F SMALL-BORE DOMINATION Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features may include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. CYLINDER & PISTON In the reworked and shorter cylinder that has a bore of 78 mm, is a weight-reduced, forged bridged box-type piston made by CP. It features a unique piston shape adapted to the new combustion chamber and stands out with its extra-rigid structure, combined with a low weight. The compression ratio is at 14.4:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. COUNTER BALANCER SHAFT In order to balance the mass-forces, the new 250 XC-F engine uses a multifunctional counter balance shaft that also drives the water pump and timing chain. It features new sprockets fitted to the new timing chain. ELECTRIC STARTER The new 250 XC-F is fitted with an electric starter as standard, which a clear advantage in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight-reduced starter drive guarantees more efficient and reliable starting. ENGINE CASES AND COVER The completely new design of the die-cast engine cases allowed for a much more centralized shaft configuration. The engine is now shorter by 20 mm, contributin