2015 Husqvarna FC 250, 2015 Husqvarna® FC 250 HIGH TECH RACE WEAPON An exhilarating, high-revving power delivery and a lightweight and agile chassis, make the FC 250 a true contender in 250 4-stroke racing at all levels worldwide. The 14,000 RPM rev limit and peak power at well over 40 horsepower are benchmark performance figures. High quality standard equipment includes electric start, a hydraulic clutch, Brembo brakes and a handlebar-mounted map switch. Features May Include: ENGINE MANAGEMENT SYSTEMThe electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power.ENGINETechnologically advanced solutions in engine layout and components ensure explosive engine performance. The lightweight and compact DOHC 4-stroke engine has been designed to offer top performance without compromise. The large titanium valves (32.5mm intake and 26.5mm exhaust) weigh only 19.6g each on the intake side and 18g on the exhaust side.CRANKSHAFT, CONROD AND PISTONThe high revving 250cc engine demands high-tech and reliable engine components. The crankshaft features a plain big end bearing and force-fitted bearing shells, ensuring durability and long service intervals. The conrod and crankshaft are produced by industry leader Pankl to exacting standards. The piston is produced by König and has been designed for minimum weight to suit the high-revving, high output nature of the FC 250. The forged box-type piston weighs only 200g and combines high performance and reliability, and guarantees a compression ratio of 13.9:1 for maximum power output.FRAMEThe engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal feedback and complete confidence in every situation. This was achieved by designing the lightweight chromium molybdenum frame with precise longitudinal flex that helps absorb impacts from the rear wheel, working together with the suspension for better comfort and greater feedback. The torsional rigidity enhances turn-in, sharp handling and stability even on the roughest terrain, giving the rider complete confidence in finding his lines and increasing his pace lap after lap.SUBFRAMEThe lightweight polyamide rear subframe has been reinforced with an additional screw on the airbox side that improves the fitment between the left subframe arm and the airbox. The improved seal guarantees better performance and durability. The three-piece composite subframe, made of high strength polyamide with a precision injectio
The success of Husqvarna's signature Red Head on the 2012 TC 250 has led it to find its way on all of Husky's small-bore 4-strokes in 2013, including the revamped TXC 250 R. The new Red Head isn't all the quarter-liter off-roader gets this year. As well as a shot in the arm in the power department, the suspension has been upgraded to complement the more aggressive new motor. The TXC 250 R not only has a racier nature for 2013, but offers the absolute lightest handling when it comes to cross-country competition bikes.
2017 Husqvarna TE 250, Come in and check this bike out at Everett Powersports on Everett Mall Way! Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® TE 250 ENDURO REDEFINED The TE 250 takes the simple, low-maintenance motor concept that is a proven favourite of enduro riders, and progresses it with modern technological advancements. The combination of class-leading power and modern lightweight construction just got massively better for 2017. A new shaft arrangement improves mass centralisation, along with a counter-balancer shaft to reduce vibration. A new 38mm flat-slide MIKUNI TMX carburator is more resistant to altitude and temperature changes, requiring less-frequent adjustment than previous carbs. The new electric starter unit is located within the engine casings, keeping it secure from impacts. It is now linked to a lightweight and powerful Li- Ion battery for reliable starting when you need it most. Features may include: EngineFeaturing the very latest in 2-stroke technology, the TE 250 engine has a completely new construction featuring new shaft arrangements for better mass centralisation, a new counter balancer shaft reducing vibration, a new twin-valve controlled power valve and re-worked 6-speed enduro gearbox.CylinderThe 66.4mm bore cylinder features a newly developed power valve system which delivers smooth and controlled power throughout the RPM range. This can be further customised by simply changing between three springs supplied and altering the power delivery for different conditions and rider preference.Counter-balancerThe new engine design allows for the implementation of a laterally mounted counter balancer. The balancer is integrated in a very compact way and significantly reduces vibrations resulting in a smoother and more comfortable ride.CrankcaseThe lightweight, die-cast engine casings are developed to accommodate new shaft arrangements. The clutch shaft is now 8mm higher while the crankshaft position is 27mm higher centralising oscillating mass and improving ride-ability.Functional bodyworkDistinctive and futuristic bodywork highlight the impressive leap forward for MY17, while striking pearl blue and electric yellow colours and graphics stylishly adorn the Swedish inspired design. With completely new ergonomics, rider control and comfort are improved allowing the rider to perform at the peak for longer periods of time. The seat has a low profile design with a new high grip seat cover which keeps the rider planted under hard acceleration and in slippery conditions.Map select switchThe engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to rider
2017 Husqvarna TC 250, Come in and check this bike out at Everett Powersports on Everett Mall Way! Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® TC 250 HIGH INTENSITY THRILLS Completely new for MY 17, the TC 250 portrays the constant development and secure future of the historic 250cc 2-stroke in the Husqvarna line-up. With a newly designed chassis, the TC 250 sees a significant reduction in weight with increased agility and rider comfort. Additionally, the lightweight 2-stroke engine is completely redesigned and features increased efficiency, more centralised masses as well as a substantial reduction in vibration. Features may include: New engineThe 250cc 2-stroke engine is the ultimate combination of unsurpassed power and lightweight construction. The simplicity and low maintenance cost of the 2-stroke motor makes it a favourite amongst motocross riders. The new TC 250 engine has a completely new construction featuring a new shaft arrangements for better mass centralisation, a new counter balancer shaft reducing vibration, a new twin-valve controlled power valve and re-worked 5-speed gearbox.New cylinderThe 66.4mm bore cylinder features a newly developed power valve system which delivers smooth and controlled power throughout the RPM range. This can be further customised by simply changing two springs supplied and altering the power delivery for different track conditions or rider preference. The new cylinder and cylinder head incorporate a new water jacket design which guarantees better heat dissipation and improved cooling under the most extreme conditions. New cylinder head mountings secure the engine to the frame while also reducing vibrations for a smooth ride.New crankcasesIn an effort to centralize mass, the lightweight die-cast engine casings are developed to accommodate new shaft arrangements. The clutch shaft is now 4mm higher while the crankshaft position is also raised 19.5mm centralising oscillating mass and improving ride-ability. Additionally the new counter balancer shaft has been integrated in a very compact manner without compromising the overall design while new engine covers offer better resistance from wear created by riders boots.New counter balancer shaftThe new engine design incorporates a laterally mounted counter balancer shaft. This shaft significantly reduces vibrations resulting in a smoother, more comfortable ride.New frameWith years of experience in designing the most advanced steel frames in offroad, the engineers in Research and Development designed a chromium molybdenum steel frame that redefines every structural aspect that benefits handling, ergonomics and packaging. With carefully calculated tortional and longitudinal flex, the frame work
The TE 250 takes the simple, low-maintenance motor concept that is a proven favorite of enduro riders, and progresses it with modern technological advancements. The combination of class-leading power and modern lightweight construction just got massively better for 2017. A new shaft arrangement improves mass centralization, along with a counter-balancer shaft to reduce vibration. A new 38 mm flat-slide Mikuni TMX carburetor is more resistant to altitude and temperature changes, requiring less-frequent adjustment than previous carbs. The new electric starter unit is located within the engine casings, keeping it secure from impacts. It is now linked to a lightweight and powerful Li-Ion battery for reliable starting when you need it most.
Completely new for MY 17, the TC 250 portrays the constant development and secure future of the historic 250cc 2-stroke in the Husqvarna line-up. With a newly designed chassis, the TC 250 sees a significant reduction in weight with increased agility and rider comfort. Additionally, the lightweight 2-stroke engine is completely redesigned and features increased efficiency, more centralised masses as well as a substantial reduction in vibration.
2017 Husqvarna FC 250, In stock now!! 2017 Husqvarna® FC 250 RAZOR-SHARP AGILITY The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed. Features may include: EngineAll major components and shaft arrangements have been carefully designed and placed in specific positions that best suit the performance and handling characteristics of the FC 250. The 250 cc engine is not only light at 26.1 kg but also remarkably powerful with an overall power output of 46 hp at the output shaft. One way in which this was achieved was by engineering key components to produce the least amount of friction possible, reducing drag as a result.DOHC cylinder headThe DOHC cylinder head features finger followers with a DLC (diamond like carbon) coating resulting in minimal friction and optimal performance. These actuate large titanium valves (32.5 mm intake, 26.5 mm exhaust) which at the 14,000 rpm rev-limit open and close multiple times each second introducing fuel/air mixture to the carefully designed combustion chamber delivering efficient and optimal power throughout the rev-range. The cylinder head is now fixed to the frame using lightweight aluminium brackets saving 114 grams while keeping the same structural integrity.CrankcasesThe aluminium crankcases have been designed to house the internal components of the engine in the perfect position to achieve the ideal centre of gravity. The lightweight casings are manufactured using a high-pressure die cast production process, resulting in thin wall thickness while retaining exceptional reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers.Exhaust systemThe FC 250 exhaust system has been expertly designed to deliver the best possible performance while adhering to the FIM noise limits. The header pipe features a resonance chambers for optimal performance while the silencer is crafted from lightweight and strong aluminium.Magura hydraulic clutchThe FC 250 features a Magura hydraulic clutch system. The high quality German-made clutch system guarantees even wear, almost maintenance-free operation and perfect modulation in every condition. This means that play is constantly compensated so that the pressure point and function of the clutch remain identical in cold or hot conditions, as well as over time.CSS clutchThe 250 cc and 350 cc engines feature a CSS (coil spring steel) clutch with Magura hydraulics and lever. The CSS clutch has six coil springs a
2016 Husqvarna FC 250, only 3 hours on this lightly used Demo bike! 2016 Husqvarna® FC 250 RAZOR-SHARP AGILITY A completely new 250cc DOHC engine has been designed to perfectly match the new generation chassis. All internal components have been revised and repackaged in order to reposition the engine within the new chromoly steel frame, shifting the mass closer to the centre of gravity of the motorcycle. In combination with the shorter and lighter carbon fibre rear subframe, revised 4CS fork, new shock, new rear link and shorter exhaust, the new FC 250 has enormously improved handling, manoeuvrability and performance compared to the previous generation. Features May Include: NEW FRAMEThe engineers in Research and Development have designed a completely new chromium molibdenum steel frame that redefines every structural aspect in order to improve handling, ergonomics and packaging. The torsional rigidity and longitudinal stiffness have been completely rethought. The 6mm wider and 2mm lower steel tubes offer 20% more torsional rigidity and 30% less longitudinal stiffness compared to the previous generation frame design. These characteristics, matched to the new engine stays, improve handling precision while at the same time increasing bump-absorption and feeling.NEW SUSPENSIONWP s 4CS fork has a revised setup to match the new chassis characteristics of the MY16 generation motocross. As with all 4CS forks by WP, the clicker settings can be easily and quickly adjusted via the dials on the top of the fork tubes. The red dial on the right alters rebound damping, while the white dial on the left is for compression damping. A new, shorter and lighter shock by WP features a larger gas chamber designed to maintain consistent performance during use. New internal components, such as the piston and shock shaft increase setup options. A new clevis design contributes to shortening the overall length by 12 mm, while the stroke is reduced by 3 mm. The shock is completely adjustable for high and low speed compression damping as well as rebound. The rear link has been completely redesigned to match the new rear shock. 148.2 mm pull rods replace the previous link s 145 mm items and, combined with the redesigned bell crank, maintains a similar progressive rate as MY15. Rear wheel travel is now 300 mm and, thanks to the uprated rear suspension behaviour, softer springs can be used.NEW CRANKCASESThe new FC 250 features a completely redesigned engine with mass-centralisation and weight reduction as the main goals. All the major components have been repositioned; the crankshaft has been raised by 6 mm while the clutch shaft is 11.1 mm further back and 26.9 mm higher up. These modifications required a complete redesign of the crankcases which are now significantly more compact and lighter.NEW ENGINEThe crankshaft has been repositioned and is now 6 mm
2016 Husqvarna TC 250, Price Reduced $750. Two Stroke Competition. 2016 Husqvarna® TC 250 HIGH INTENSITY THRILLS Detail changes to the MY16 TC 250 are aimed at refining the riding experience thanks to a new CNC machined triple clamp with rubber damping and a new seat cover that greatly improves grip and durability. Stronger braking performance is guaranteed by new disc brakes and the 100 g lighter spokes reduce unsprung weight for improved agility. The standard handlebar map switch, polyamide rear subframe, hydraulic clutch and Brembo brakes make the TC 250 a formidable competitor to the more complex 4-strokes. Features May Include: IGNITIONThe ignition can be modified according to track layout and rider preference. The CDI unit features two ignition curves that can be switched via the handlebar-mounted Husqvarna accessories map select switch fitted as standard.ENGINEThe powerful 250 cc 2-stroke engine features an exhaust power valve to boost power and torque along the entire rev range. A precise 5-speed gearbox and smooth hydraulic clutch ensure accurate gear changes and perfect clutch modulation with almost no maintenance.CYLINDERThe cylinder head has been designed for throttle response and torque and is perfectly mated to the power valve for optimal power delivery in every circumstance.FRAMEThe engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal feedback and complete confidence in every situation. This was achieved by designing the lightweight chromium molybdenum frame with precise longitudinal flex that helps absorb impacts from the rear wheel, working together with the suspension for better comfort and greater feedback. The torsional rigidity enhances turn-in, sharp handling and stability even on the roughest terrain, giving the rider complete confidence in finding his lines and increasing his pace lap after lap.SUBFRAMEThe three-piece composite subframe, made of high strength polyamide with a precision injection moulded production process, has been designed to offer stiffness while flexing more than an aluminium subframe, complementing the flex characteristics of the frame in order to offer optimum rider feedback and feeling in all conditions. The lightweight design offers engineers unlimited opportunities in integrating features such as all the electronics and the airbox.SWINGARMThe single component construction of the aluminium swingarm eliminates welding, providing more reliability, stability and safety, as well as superior quality and consistent behaviour over time compared to other construction processes.4CS FORKWP 4CS fork is developed specifically for Motocross. As with all 4CS forks by WP, the clicker settings can be easily and quickly adjusted via the dial
The TE 250 takes the simple, low-maintenance motor concept that is a proven favorite of enduro riders, and progresses it with modern technological advancements. The combination of class-leading power and modern lightweight construction just got massively better for 2017. A new shaft arrangement improves mass centralization, along with a counter-balancer shaft to reduce vibration. A new 38 mm flat-slide Mikuni TMX carburetor is more resistant to altitude and temperature changes, requiring less-frequent adjustment than previous carbs. The new electric starter unit is located within the engine casings, keeping it secure from impacts. It is now linked to a lightweight and powerful Li-Ion battery for reliable starting when you need it most.
2017 Husqvarna FE 250, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FE 250 TOTAL ENDURO PRECISION The lightest, most compact Husqvarna 4-stroke enduro bike. Smooth 4-stroke torque and power in a much lighter and more compact chassis. A new precision-built frame offers improved agility, better bump absorption and optimum suspension functionality while only weighing 8.8 kg. New laterally-mounted head-stays increase handling agility and reduce vibration. All 2017 4-stroke models have new header pipes and shorter mufflers for maximum performance within the FIM noise limits. Enduro riders face some of the toughest conditions, always looking for positive traction to drive the bike forward. The 2017 range of 4-strokes have an optimised map-switch, which also activates the Traction Control feature. Features may include: WP Xplor 48The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up.WP rear shockThe WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption.Brembo brakesClass-leading Brembo callipers and controls with high quality GSK discs deliver superior stopping power instilling confidence in all situations. For MY17, the rear brake calliper uses a smaller piston diameter 24mm instead of 26mm, coupled with a 10mm longer rear brake lever the system delivers improved modulation and feeling.ODI lock on gripsThe ODI lock-on grip on the left side does not require gluing, while on the right, the vulcanised grip features an integrated throttle mechanism. The assembly has easy free-play adjustment and, by changing a cam, throttle progression can be altered.EngineThe new 250cc engine is re-designed to be more powerful, lighter and more compact. All major components and shaft arran
A completely new 250cc DOHC engine has been designed to perfectly match the new generation chassis. All internal components have been revised and repackaged in order to reposition the engine within the new chromoly steel frame, shifting the mass closer to the centre of gravity of the motorcycle.In combination with the shorter and lighter carbon fibre rear subframe, revised 4CS fork, new shock, new rear link and shorter exhaust, the new FC 250 has enormously improved handling, maneuverability and performance compared to the previous generation.
2017 Husqvarna FC 250, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FC 250 RAZOR-SHARP AGILITY The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed. Features may include: EngineAll major components and shaft arrangements have been carefully designed and placed in specific positions that best suit the performance and handling characteristics of the FC 250. The 250 cc engine is not only light at 26.1 kg but also remarkably powerful with an overall power output of 46 hp at the output shaft. One way in which this was achieved was by engineering key components to produce the least amount of friction possible, reducing drag as a result.DOHC cylinder headThe DOHC cylinder head features finger followers with a DLC (diamond like carbon) coating resulting in minimal friction and optimal performance. These actuate large titanium valves (32.5 mm intake, 26.5 mm exhaust) which at the 14,000 rpm rev-limit open and close multiple times each second introducing fuel/air mixture to the carefully designed combustion chamber delivering efficient and optimal power throughout the rev-range. The cylinder head is now fixed to the frame using lightweight aluminium brackets saving 114 grams while keeping the same structural integrity.CrankcasesThe aluminium crankcases have been designed to house the internal components of the engine in the perfect position to achieve the ideal centre of gravity. The lightweight casings are manufactured using a high-pressure die cast production process, resulting in thin wall thickness while retaining exceptional reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers.Exhaust systemThe FC 250 exhaust system has been expertly designed to deliver the best possible performance while adhering to the FIM noise limits. The header pipe features a resonance chambers for optimal performance while the silencer is crafted from lightweight and strong aluminium.Magura hydraulic clutchThe FC 250 features a Magura hydraulic clutch system. The high quality German-made clutch system guarantees even wear, almost maintenance-free operation and perfect modulation in every condition. This means that play is constantly compensated so that the pressure point and function of th
The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed.**NO FREIGHT OR SETUP FEES!!!**
