Custom Built Motorcycles motorcycles for sale in North Carolina

1-15 of 53

Sort By

1998 Custom Built Motorcycles Other  1998 Suzuki TL1000R

1998 Custom Built Motorcycles Other 1998 Suzuki TL1000R "ALPHAMILLE" V-Twin Sportbike

$11,500

Holly Ridge, North Carolina

Year 1998

Make Custom Built Motorcycles

Model -

Category Sport Bikes

Engine 1000

Posted Over 1 Month

*BIKE EXIF 'S top 5 best custom motorcycle of the week (published on Jan 29 2017)*Featured also on BikeBound, Gearheads and many others. SPECS: This is a Custom built sportbike 1/1 The whole concept behind this build was to bring simplicity to an extremely complicated bike. For starters, the braking and suspension system: Braking: The tokiko 6 piston calipers (a true nightmare if not rebuilt properly) have been taken apart, the chambers honed, pistons polished on the lathe and seals replaced, result = one finger stoppies.New wavy rotors installed in place of the old OEM ones and new pads The front forks have been rebuild with better springs and sealsIn the Rear, the over engineered rotary damper and spring (the infamous rotary damper i should say) was thrown in the trash followed by a brief celebration in the shop.I'm still wondering what Suzuki's engineers were thinking when they came up with that thing. In its place, we installed a modern fully adjustable rear shock that does the job at ¼ of the weight of the OEM setup. Frame: The OEM subframe was discarded in favor of a custom built one. GSXR Gas tank and Custom tail section: Adapting a gas tank meant to gravity feed carburetors to work with a fuel injection motorcycle wasn't exactly a piece of cake, after a few days in the work i managed to make everything work like it came from the factory. The tail section was handmade with fiberglass, gel coated and painted The whole new Gas tank / tail section setup was engineered in a way that can be taken apart without tools for a super fast maintenance. The wiring was simplified where possible, and relocated within the frame lines (between gas tank and motor) exception made for the ecu, positioned as far away as possible from heating sources. The Numbers:Originally known as an incredibly heavy sportbike228Kg /503lbs wet,Producing 135HP (120 hp of which at the wheel)with a power to weight ratio of 0.53hp/kg after the “treatment” the ALPHAMILLE finally feels like the type of bike that you can really squeeze all the potential out of. After scoring a WET weight of only 420lbs (190kg) over 80 lbs lighter than stock and a Dry weight of 390lbs (176kg) this bike now places itself amongst the lightest production sportbikes available on the market even compared to newer models. There are margins of improvements available regarding the weight.It wouldn't be too hard to get into the 400 lbs Wet by installing lighter wheels, 520 chain, removing the lower radiator. Based on the actual power to the wheel 120 hp and wet weight a stock TL1000R hada power / weight ratio = 0.52 Hp/Kg Thanks to a custom fuel mapping the motor power output increased to 125 WHP that along with the enormous weight loss we were able to achieve aNEW power / weight ratio = 0.65 Hp/Kg An outstanding 23% improvementThat's equivalent of adding 30hp at the wheel on a stock TLR The bike's loud, rumbles as you'd expect from a V-twin without cans. Baffles can be installed at your discretion Motor Tune up:20K miles valve clearance checkCharging system checkOil and filter changeCoolant flushNew brake and clutch fluidsCustom fuel mapStraight Exhaust with racing bafflesOpen intake filters Other mods:- Exhaust tips fabricated in the shop- Custom front fender fabricated- One off headlight with LED Hi beam- Throttle bodies balanced- Digital aftermarket Speedo/Tach with coolant temp reading- Oil and filter service- Low profile Hi flow/water resistant radiator fans- Radiator fan switch on handlebar- Custom fit belly pan- New aluminum radiator over flow tank- Map based fuel injection tuning module FI TUNER PRO- Handlebar mounts and handlebar- Rebuilt and relocated steering damper- Fabricated 3/8” petcock adapter plate and new petcock with reserve- Inline K&N fuel filter- New 530 9000lbs tensile strenght Gold chain- Vanzuki blue triple clamp stem nut- Vanzuki blue stator cover plug with new o-ring- New clutch and brake master cylinders- New Braided brake lines- New Pirelli Rosso Corsa II tires (front and back)- Drilled rear rotor- Candy blue forks legs- LED rear brake/tail light- Gas tank mounts- Airbox delete- Lithium battery 230cca- New Sub-frame fabricated in the shop- Rare "Graves" clutch cover FURTHER CUSTOMIZATION AVAILABLE. WE SHIP WORLDWIDE Website: magnumopuscustombikes . com Socials:Facebook: MagnumOpusCustomBikesInstagram: magnumopuscustombikes Phone: 347-235-9405 Ezio *Immediate deposit of 500$ required to hold the bike, if you fail to pay the deposit the bike will be relisted and the sale cancelled.Full payment required within 7 days from the purchasing date.

Custom Built Motorcycles : Chopper custom motorcycle

Custom Built Motorcycles : Chopper custom motorcycle

$22,500

Salisbury, North Carolina

Year 2013

Make Custom Built Motorcycles

Model Chopper

Category Chopper Motorcycles

Engine 1460

Posted Over 1 Month

2013 custom chopper. 8 Ball Mfg custom frame with custom molded sheet metal by Big Mike at Malibu Motorcycle Works. 120 ci Ultima polished and diamond cut motor with 6 speed transmission. Adjustable air ride suspension. PM primary and hand and foot controls. Ferrari red paint with white scallops for a sleek hot rod look. Alligator skin seat to add to the exotic look of the bike. Eye catching and attention getting bike where ever it goes. For those serious inquires, if you have any further questions or want more details on the bike you can reach me at 502-655-2224.

Custom Built Motorcycles : Chopper **CHOPPER**WCC**S&S**BOBBER**CUSTOM**PATINA**FRISCO**ONE COOL BIKE**MUST SEE**

Custom Built Motorcycles : Chopper **CHOPPER**WCC**S&S**BOBBER**CUSTOM**PATINA**FRISCO**ONE COOL BIKE**MUST SEE**

$14,998

Boone, North Carolina

Year 1998

Make Custom Built Motorcycles

Model Chopper

Category -

Engine -

Posted Over 1 Month

BIKE WAS BUILT BY THE FAMOUS CYCLE REFINERY 1998 AMERICAN EAGLE FRAME96'' S&SS&S SUPER E CARBJIMS 6 SPEED TRANSBMC PRIMARYGARAGE KEPTAPPROX 7500 MILESNEW FRISCO STYLE 3.5G TANKBIKE HAS NEW JESSE JAMES FRONT AND REAR FENDERTANK AND FENDERS HAVE AWESOME RUST PATINA AND HAVE BEEN PROFESSIONALLY CLEAREDNEW SEAT & SPRINGSLAF DRAG EXHAUSTPINGEL PETCOCKBILTWELL THROTTLEVELOCITY STACK INTAKEPERFORMANCE MACHINE BRAKESMOST PARTS ARE NEWRUNS LIKE A SEWING MACHINE!NO LEAKS!BIKE WAS JUST FULLY SERVICEDCLEAN AND CLEAR TITLEONE OF A KIND!REAL HEAD TURNER! IT GETS THUMBS UP EVERYWHERE I GO ON IT!BLAST TO RIDE AND SOUNDS SO SICK! ANY QUESTIONS CALL ZANE 336-756-1081 MILEAGE MAY BE HIGHER AT TIME OF SALE, IM PERIODICALLY STILL RIDING THE BIKE AS THE WEATHER ALLOWS I HAVE INCLUDED 75+ HD PHOTOS AND HD RUNNING VIDEO PLEASE BE SURE TO LOOK THROUGH THEM ALL Terms of Sale Payment Terms: The successful high bidder will submit a $500.00 nonrefundable deposit via Paypal within 24 hours of the close of the auction to secure the vehicle. Buyer agrees to pay remaining balance due within 7 days of the close of the auction. All financial transactions must be completed before delivery of the vehicle. Payment Methods: Cash (In Person), certified check, cashier’s check, or third party approved financing. Please call prior to bidding to insure your third party financing is acceptable terms of payment. All checks are made payable to Creed Enterprises LLC.**HAVE ANY AND ALL FUNDS SECURED BEFORE SUBMITTING AN OFFER OR BIDDING** NO DOC FEE WILL BE COLLECTEDAll NC buyers will be responsible for 3% State Sales Tax, Title, and Registration.Out of state buyers are responsible for all state, county, city taxes and fees, as well as title or registration fees in the state that the vehicle will be registered. Contact:Creed Enterprises LLC. We are located at 2029 Red Brush Rd. Mount Airy, NC 27030ALL VEHICLE'S LISTED ARE ON LOCATION AT THIS FACILITY You can reach us via email at creedenterprises@rocketmail.comOffice (336) 836-0036Cell (336) 756-1081Fax (336) 836-0033 Terms and Conditions:All vehicles are for sale locally, our company reserve's the right to end listing early due to local sale. Any and all bidders will be notified before listing is ended. All vehicles are sold AS-IS with no warranty expressed or implied unless noted differently above. All inspections must be completed and financing arranged prior to bidding. Pre-sale inspections are encouraged. Additional keys, owner’s manuals, key fobs,Factory Floor Mats, and navigation disc may not be available if not included in the listing. Creed Enterprises LLC. agrees to make every responsible effort to complete timely pick up and delivery, however, we cannot guarantee specific dates and times. All carriers are subcontracted therefore we are not responsible or liable for any claim or loss of any kind in the event that subcontractors are late in picking up customer’s vehicle(s) and/or delivering customer’s vehicle(s), regardless of the length of the delay. All pick up and delivery dates and times are estimates only. NO EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES ARE MADE WITH RESPECT TO PICKUP OR DELIVERY TIMES OR DATES. We reserve the right to notify bidders and cancel this auction. We reserve the right to cancel bids from those with excessive negative feedback. Please email or call us if you have negative feedback or zero feedback prior to bidding. Zero feedback bidders who don't contact us will have their bid canceled. Upon final inspection of the vehicle, if it's not as described, purchaser doesn't have to complete the transaction. If your vehicle is shipped and upon its arrival, if it not as described we will gladly accept the vehicle back for a 100% refund of the vehicle price, vehicle must remain with the transportation company. Buyer pays for all shipping charges. Please expect wear associated with age, miles, and vehicle history. Vehicle may have dings, dents, paint chips, previous paint work, windshield chips, wheel scuffs, scratches, rust and other wear or defects that are associated with age and mileage that are not visible in photos. Please expect stains in carpets, stress lines and worn spots on seats, and other common interior wear even if NOT shown in photos. We attempt to accurately describe our vehicles condition with photos and text. The content in this listing is subjective and should be used as a guide to determine a vehicles condition prior to bidding. If you don’t see something photographed or specifically described, please don’t assume anything, we are here to answer all questions. Please expect wear and flaws, this is standard on most used vehicles. Maintenance and check engine lights and related issues are the responsibility of the new owner. Prior to bidding, arrangements must be made with our company if your vehicle is not to be picked up in person or if shipping is arranged by the buyer within 7 days. Storage fees of twenty five dollars per day incur after the 7th day if no prior arrangement are made. Non paying bidders are subject to guidelines of the Better Business Bureau, a five hundred dollar re listing fee and also eBay's non paying bidder’s recourse. All non paying bidders that don't communicate with our company are subject to judgments of five thousand dollars with Surry County District Court. Suits are filed automatically. All transactions take place in Surry County so that’s where all claims from buyer and seller will be filed. If you don't intend on paying for your purchase we highly encourage you not to bid on our auctions. We pursue all non paying bidders. All Deposits are non-refundable. We value the integrity of our company, products, and most of all, our customers, so by bidding on our auctions you are in agreement to our complete terms of sale.

Custom Built Motorcycles : Pro Street CUSTOM CHOPPER MOTORCYCLE S&S 124 SIDEWINDER 5 SPEED BAKER

Custom Built Motorcycles : Pro Street CUSTOM CHOPPER MOTORCYCLE S&S 124 SIDEWINDER 5 SPEED BAKER

$15,620

St. Pauls, North Carolina

Year 2002

Make Custom Built Motorcycles

Model Pro Street

Category -

Engine 124 CUBIC INCH

Posted Over 1 Month

BID IS FOR BIKE IN PICTURES NOT FOR NEW RIDERS THANK YOU FOR LOOKING

Custom Built Motorcycles : Other 2014 kawasaki ninja ex 300 h 2 race replica by bexton craft motorcycles

Custom Built Motorcycles : Other 2014 kawasaki ninja ex 300 h 2 race replica by bexton craft motorcycles

$9,500

Cary, North Carolina

Year 2014

Make Custom Built Motorcycles

Model -

Category Caf Racer

Engine 300

Posted Over 1 Month

Up for sale is another Bexton Moto build. I wanted to build a bike that looked like the 1973 Nixon and Erv Kanemoto Kawasaki 750cc H2R and I decided to combine the build with my affinity for 300 Ninjas. So I set out to create a replica of the original bike as closely as I could using a 2014 Kawasaki EX300 Ninja (with ABS). This bike is the result. The 300 Ninja that I used as the base for this build came to me with only 54 miles on the clock, it now has about 400 miles on it. It was crashed, the sub frame was bent and all the fairings were destroyed. It has a salvage title as a result.I cut off the sub frame, straightened it out and modified it to suit the H2 replica seat. I stripped it down to the frame, made sure it was all dead straight and then powder coated it in flat black. The swing arm and all the brackets, of which there are more than 30 that are custom made, were also powder coated.This bike is very small and the clip-ons are quite low so if you are over 6 feet you will most likely be cramped riding it. I am 5’11 and it is a doable, but a tight fit for me. I have taken it on a ride of over an hour without any issues though.Below is the build list.2014 Kawasaki EX300 Ninja ABS2006 Kawasaki ZXR6 Forks, triple clamps and right brake caliper2005 Suzuki GSXR rear shockCopy of the original H2R seat in fiberglassModified Yamaha TZR250 race fairing upper and lower in fiberglassModified Kawasaki 300 Ninja gas tank with 18 gauge steel skirts welded onCustom sub frame to accommodate the narrow seatLED tail light and turn signal combinationKawasaki H2R replica front fender in fiberglassSingle headlight and led turn signals up frontYoshimura full race exhaustPower commanderK&N air filter inside stock air boxPaint is a replica of the original Gary Nixon bikeWheels were painted gold to match the upside down front fork and caliper Oil was changed at 300 miles with Castrol GTX 10w40 If you have any questions please feel free to ask. Bike is sold as is with no warranty stated or implied. Local pickup or shipping provided by buyer. I am willing to work with your chosen shipper. Payment strictly cash or by cashier’s check. Title is labeled as salvage but it is titled and inspected and ready to ride.

Trim EX 300 Ninja

Custom Built Motorcycles : Bobber 1983 yamaha xs 650 custom built bobber

Custom Built Motorcycles : Bobber 1983 yamaha xs 650 custom built bobber

$9,000

Holly Ridge, North Carolina

Year 1983

Make Custom Built Motorcycles

Model Bobber

Category Cruiser Motorcycles

Engine 650

Posted Over 1 Month

83 xs650 heritage special. I finished this bike this year. Fully Built from the frame up. Clear Colorado title. One kick bike. Daily rider Pamco Points Ignition, HHB PMA with capacitor (no Battery), 64 spoke heritage special 21" with a 3" drop and shaved forks, brand new Mikuni VM34s. let me know if you have any questions.Ask for availability as i reserve the right to sell it locally at any time

Custom Built Motorcycles : Chopper Custom Carolina Chopper

Custom Built Motorcycles : Chopper Custom Carolina Chopper

$7,900

Jacksonville, North Carolina

Year 2010

Make Custom Built Motorcycles

Model Chopper

Category -

Engine 1340

Posted Over 1 Month

2010 Carolina Custom Chopper, Harley EVO motor, EV 27 cam, S & S carb, 10 over front end, 21 front, 300 back tire, flat black with cool custom pin stripe. LAF pipes, West Coast Choppers original Villian tank. Beautiful hand tooled leather seat. 3 inch belt drive. Cool flat black and brass headlight. Road ready. Clear title. Bike Show winner. My loss your gain.

Trim Carolina

Custom Built Motorcycles : Bobber Custom Bobber Project Bike

Custom Built Motorcycles : Bobber Custom Bobber Project Bike

$5,500

Jacksonville, North Carolina

Year 2013

Make Custom Built Motorcycles

Model Bobber

Category -

Engine 1340

Posted Over 1 Month

2013 Custom Bobber Build Project, Harley EVO motor, EV 27 cam, S & S carb, 2 under Springer front end, 21 Mammoth Spoke front, 200 Mammoth Spoke back tire, flat black. LAF pipes, Sick Lo-Bro custom Frisco tank. Quality leather seat. 3 inch belt drive. Cool flat black paint job (power coat), really cool hand shifter and foot clutch. Chrome oil tank Needs to be wired Ultima Single Fire Ignition, valves (adjustable) needs to be adjusted and Carb tuned. tranny and motor are solid and both have been professionally gone through and rebuilt. No title, but I have the MSOs for the rigid frame, tranny cases and the EVO cases. I can provide bill of sale to all engine component parts, tranny parts, wheels and gas tank. This paperwork will successfully get the bike titled. The right side forward control is slightly bent, but can be easy straighten by a press. I need the money and do not have the time anymore. Great project for someone who wants a head turning Bar Hopper! My loss your gain.

Custom Built Motorcycles : Other 1982 yamaha xv 750 custom vintage cafè racer by magnum opus

Custom Built Motorcycles : Other 1982 yamaha xv 750 custom vintage cafè racer by magnum opus

$11,000

Holly Ridge, North Carolina

Year 1982

Make Custom Built Motorcycles

Model Yamaha XV750

Category Dual Purpose Motorcycles

Engine -

Posted Over 1 Month

I'm proud to announce that this bike has been featured by Bike Exifamong the best bikes of the week bikeexif.com/bikes-of-the-week-2 We're also on The Bike Shed facebook.com/BikeShedMotorcycleClub/posts/1052790164744568 Check out some of our other creations on: magnumopuscustombikes.com Facebook: Magnum Opus Custom Bikes Description: Here's the latest creation from Magnum Opus Custom Bikes called "#88 Dual Racer" We went through the motor and the bike is currently under testing to assure reliability to the buyer.This bike features NO Starter issues very common with early viragos. The motor has great compression, the carbs have been rebuilt, re-jetted and the floats adjusted to the new stance of the bike. No gas/vacuum leaks.The exhaust is handmade here in our shop, protected with a layer of paint to prevent rust and wrapped with titanium fiberglass wrap.We installed vortex clip ons, CNC aluminum handgrips, drilled the rotor, installed custom made brake line, new master cylinder, rebuilt the caliper and installed new pads.The headlight is one of a kind handmade and features triple cree led, it has only 1 beam but 3 times the brightness of regular halogen lights. No more dark, dangerous rides at night. We installed a 2.5" in speedometer to preserve a minimalistic look of the bike, relocated the ingnition switch on the right side of the bike and customized the wiring hareness under the tankThe tank comes from a honda CB750, it's in great conditions and it's been adapted to the new yamaha frame.it's easy to take off the bike having only one bolt accessible under the seat.it features a beautiful custom paint job candy gold/whiteThe subframe has been fabricated in our shop to fit this super comfortable Motolanna cafe racer seat.The battery (non spillable) fitted under the seat and hidden with stainless steel mesh on the sides.We installed new rear sets to get a more comfortable riding position, forks boots to keep the forks clean and at the same time to accomplish a specific look of the front endThe bike rides and sounds wonderfully, it has straight pipes (yes, loud pipes save lives) but i can install some baffles to reduce the noise of 10/15 db. upon request.I personally love it this way, the noise it's totally manageable. We obviously got rid of the air box and installed a single velocity stack right where the air box was, we also installed some screens to keep the intake clean from big particlesLed headlight, Led blinkers, led tail and brake light.Front and rear suspensions are adjustable so you can adapt it to your riding We were able to shave 50-60 pound off the bike resulting into a faster and safer machine In the end we opted for dual sport tires as they give this bike a beefier/sportier look If you're local (Wilimington, NC area) we give you a 500 miles/30 days warranty as we're sure of the way we built this bike. NO other builder gives you any warranty on a vintage bike.Unfortunately there's NO warranty expressed or implied for out of area / state / country buyers, due to possible scams. MAKE SURE TO WHATCH IN HD!!! The sound picked by the mic doesn't give it justice. Our bikes have been featured on all the major motorcycle websites, blogs like "Cafè racer TV" , "The Distinguished Gentlemans ride" and many more We accept credit card payments - 3.2% credit card fee will be added to the total Clean/clear title as for all our bikes Feel free to contact me with any question/concern Shipping references available upon request. Make sure you read the "Payment and Shipping" section as well. Buy with confidence and as always WE SHIP WORLDWIDE! Disclaimer:Depending on what part of the globe you live in, you might need to re-jet the carburetors in order to have a smooth ride.If your weather and altitude are similar to Wilmington NC, you won't need to do change anything.

Custom Built Motorcycles : Chopper Custom built motorcycle with great design features and perfomance

Custom Built Motorcycles : Chopper Custom built motorcycle with great design features and perfomance

$21,500

Salisbury, North Carolina

Year 2013

Make Custom Built Motorcycles

Model Chopper

Category -

Engine 1460 cc

Posted Over 1 Month

Bike was started in 2012 as a Malibu Motorcycle Works rolling chassis from Big Mike. Final assembly & paint was done in Lexington, KY by the guys at The Bike Shop. Bike features 300mm back tire with a 26" front wheel. Polished Ultima 120 cubic inch motor with diamond cut fins and matching 6 speed transmission. PM foot and hand controls along with PM primary. Black components integrated into design of bike to offer contrast to chrome and paint features. Bike performs exceptionally with a great ride. Interested buyers can reach me at 502-655-2224 for any further details. All receipts, certificate of orgins, and documents available.

Custom Built Motorcycles : Pro Street Redneck Mutant Pro Street 330 Rear

Custom Built Motorcycles : Pro Street Redneck Mutant Pro Street 330 Rear

$10,900

Bladenboro, North Carolina

Year 2008

Make Custom Built Motorcycles

Model Pro Street

Category Pro Street

Engine 1200

Posted Over 1 Month

2008 Redneck radical mutant, 330 rear tire. Has integrated signal lights, horn and mirrors.Around 3500 total miles, Buell Lightning motor and trans. with an automatic centrifugal clutch. Recently installed gel seat with ostrich leather covering. $6000 House of Kolors tangelo pearl paint job. Handlebars and front light powder coated. Built by Pro Street Choppers of Virginia Beach. Have over 25k worth of receipts from the original build sheet. not perfect but close. Runs and rides perfect and fast. Beware, its not a cruiser so the rigid frame provides an up close and personal feel with the road. Garage kept, adult ridden. I will take cash upon pickup. If you're not serious do not bid, thanks.

Custom Built Motorcycles : Other 1976 suzuki gt 750 cafe racer by bexton craft motorcycles

Custom Built Motorcycles : Other 1976 suzuki gt 750 cafe racer by bexton craft motorcycles

$9,500

Cary, North Carolina

Year 1976

Make Custom Built Motorcycles

Model -

Category Caf Racer

Engine 738

Posted Over 1 Month

This 1976 Suzuki GT750 Cafe Racer project is called "Threesome" due to it's 3 cylinder engine configuration. If you are familiar with this model you will know that when those three cylinders start firing in rapid 2 stroke fashion anywhere above 4500 rpm it will make the hair on your neck stand up and give you goosebumps. The sensation is sublime. This bike has been part of my collection for the past 2.5 years. The Bexton garage recently acquired another GT project bike that will replace this one.The donor bike had 16XXX miles on it and the motor ran strong without any leaks or other issues. Due to this the motor was given a fresh water pump and a fresh coat of black paint. Otherwise it was left alone. I have put another 1500 trouble free miles on it since the build was completed. It has since started to push a bit of oil out the breather when ridden too spiritedly, which indicates that the crank seals are starting to go. I installed a pipe to catch the oil and then drain it back into the engine to contain it. Performance remained unchanged due to this. However it will require a fresh set of crank seals if you plan to ride it cross country. I am pointing this out so as not to catch the new owner by surprise. But if you plan to just ride it occasionally like I do it will probably be good for years to come, just remember to change the oil regularly. The frame was modified to suit the Rickman tail section and seat. The entire frame and every single bracket was also powder coated. Electronics and battery are now housed under the tail. It has also been equipped with updated modern electronic ignition and voltage regulator and rectifier. I added a few gussets in the center triangle to tighten up the frame a little. The front end comes from a Suzuki Hayabusa, complete with forks, wheel and 6 piston caliper brakes. The front fender is from a Ducati Monster. In the rear I built a custom swingarm, using the swingarm and brake from a modern Suzuki 750 Katana as a donor. The Katana swingarm was shortened to retain the original wheelbase and some shock mounts welded on to retain the stock twin shock setup. It now runs on needle bearings instead of the original plastic bushings. I used a Suzuki SV650 rear wheel and also SV650 race rear sets. The fairing is from a Ducati SuperSport. The motor was adorned with a Jethot coated set of Jemco chambers and the carburetors cleaned and re-jetted to suit the chambers and K&N tube filters. The bike is very well sorted and easy to ride, but also a wolf in sheeps clothing, when you hit 5000 rpm you better hang on when that 2 stroke power band kicks in. The rear shock are Chinese knockoffs imitating a famous brand, so do not mistake them for being the real deal. They work as well as their origin suggests under normal riding conditions. This is an old bike design and the kickstand sits under the left chamber not leaving much room before things start touching down so you cannot expect to ride this bike at Grand Prix speeds anyway. The Hayabusa forks work extremely well and so do the brakes. I have a very detailed write up of the build with pictures and some video on my website MyBikeProject where you can see some of my other builds also. The bike was also featured on Silodrome Silodrome If you have any questions please feel free to ask. Local pickup only by your chosen shipper. I will work with the buyer to enable pickup locally. On Aug-11-15 at 07:30:02 PDT, seller added the following information: Video of the bike riding can be seen here: GT750-Riding

Trim GT 750

Custom Built Motorcycles : Chopper 2010 texas chopper s s engine 300 rear tire rigid frame trotta bourget

Custom Built Motorcycles : Chopper 2010 texas chopper s s engine 300 rear tire rigid frame trotta bourget

$10,995

Rutherfordton, North Carolina

Year 2010

Make Custom Built Motorcycles

Model Chopper

Category -

Engine 110

Posted Over 1 Month

THIS TEXAS CHOPPER WHAT YOU SEE IS WHAT YOU GET WITH A BIS S&S MOTOR 300 REAR TIRE AND RAKED JUST ENOUGH TO GET YOU THE OLD SCHOOL CHOPPER LOOK . IN THIS CASE I THINK YOU ALL WILL AGREE LESS IS MORE WHEN TRYING TO ACHIEVE THE OLD SCHOOL CHOPPER LOOK. BIKE WAS A TRAD IN ON A CUSTOM BAGGER WE HAD BUILT NO REASONABLE OFFER WILL BE REFUSED CALL 828-286-9211 SPEAK WITH JOEY OR ALLEN FOR MORE INFO ON THIS BIKE

Trim TEXAS CHOPPER

Custom Built Motorcycles : Chopper 2010 custom chopper pro street hard tail

Custom Built Motorcycles : Chopper 2010 custom chopper pro street hard tail

$12,000

Fayetteville, North Carolina

Year 2010

Make Custom Built Motorcycles

Model Chopper

Category Custom Motorcycles

Engine 2100 cc 127 cubic inch

Posted Over 1 Month

Built in 2010 with 3498 original miles. Gloss black with lots of chrome, custom airbrush wolf head on tank. Carolina Custom curved backbone drop seat rigid frame, frame powder coated gloss black. Custom hand made three piece handlebars. Engine is an Ultima 127ci, Ultma six speed transmission, Ultma 2” belt open primary. PM front and rear brakes, Billet controls and pegs, RC custom cut wheels 21” front, 300 rear with Avon Venom tires. Custom etched points cover and black cone air intake and filter. Mikuni carburetor, short drop exhaust wrapped in black heat wrap. Headwinds headlight and LED tail light. Wires Plus wiring harness and digital speedometer. Custom fiberglass seat pan and covering in ostrich skin. Does need a battery. The sissy bar is cracked through and needs a new one fabricated.

Custom Built Motorcycles : Other 2003 yamaha v star 1100 custom bagger

Custom Built Motorcycles : Other 2003 yamaha v star 1100 custom bagger

$15,000

Mooresville, North Carolina

Year 2003

Make Custom Built Motorcycles

Model V-Star

Category -

Engine 1100

Posted Over 1 Month

Custom bagger on Yamaha V-star frame. The entire bike has been built, everything from the seats to the handle-bars. 2 into 1 exhaust system, stretch fenders, custom seat tank extension, and a bluetooth sound system that will blow your ears off. Local Pickup only near Charlotte, North Carolina. Only one owner, all work done professionally. Asking $15,000. Cash/cashier's check only.