Off Road Motorcycles for sale in Salem, Oregon

1-3 of 3

Sort By

Honda : XR XL350 Powroll 403cc Megacycle Cam Al Baker's Pipe XL500 Mugen WORKS Shocks VMX

Honda : XR XL350 Powroll 403cc Megacycle Cam Al Baker's Pipe XL500 Mugen WORKS Shocks VMX

$1,995

Salem, Oregon

Year 1977

Make Honda

Model XR

Category Off Road Motorcycles

Engine 350

Posted Over 1 Month

FOR SALE 1977 HONDA XL350 We bought this bike a few years ago from a long time friend. This friend had owned this bike since 1985. Way back in 1985 he set off on a journey to create his own version of Bill Bell's Baja Bullet from the late 1970's. Clean and clear Oregon title. First off was the installation of a 403cc Powroll big bore kit. Also installed at that time was a mild Megacycle cam. While disassembled a brief clean up and smoothing out of the cylinder ports was done. Next was the fitting of a 1980 Honda XR500 carburetor. Well known for running great and good gas mileage. While the bike was apart the frame was cleaned up and any unneeded mounting hardware or tabbing for the OEM air filter box and battery stuff was neatly removed. Frame was professionally painted as Bob was pro-painter and owned his own auto body shop. At this time a custom "Mugen-like" air box was handmade and neatly installed/mounted on this bike. Bob is also a great fabricator. A new Al Baker's XR's Only exhaust pipe was purchased and installed. Still looks good. Sounds great! Header pipe has minor surface rust. While the rear end was apart the frame rails were custom modified for the installation of a at-the-time "modern" 1982 CR480 seat and rear fender section. Eliminating the big heavy XL350 seat and seat lock/helmet holder parts. All street-legal parts including: lights, wireharness, switches ETC were removed and are not included in the purchase of this bike. This bike could be made street legal again with time and effort finding the parts. We'd leave it just like it is though. A de-tabbed Honda XR500 rear swingarmwas mated up to the frame at this time as well. New mounts were made for the install of an UNKNOWN brand chain slider and chain guide. Both slider and guide are intact and in good used shape 1981-ish Honda XR500 front forks and clamps were installed. Increasing suspension travel and dampening. Custom steering stops were added to frame to make the new forks clear the then-new Clarke plastic tank. The Clarke tank now is a bit faded with some discoloration. Some of this fade disappears when you spray shiny stuff on it. We sprayed shiny stuff on it for the pics. You can see some of the stain on the sides though. Petcock currently functions fine. The vent tube nipple on the Clarke cap is broken. New caps are still avail from Clarke. In 1985, new Works Performance shocks were installed at that time too. Shocks are not leaking currently in 2016. Both seem to rebound and dampen nicely. Bike starts are runs well. Makes excellent power. Ideal for Vintage MX, trail riding or perhaps even flat tracking. Instant 2-3 gear wheelies on command. No clutch slipping needed. Brakes work decently well. Could probably use a good cleaning of the drums and shoes. Both still work OK and do not drag or stick when used. Shorty front brake lever decreased leverage and makes the cable pull harder than OEM. Front/rear tires are in good used shape. Mileage unknown. Front and rear rims are clean without dents or damage. Each wheel has 3-4 corroded spokes. Could be cleaned up and detailed with little effort. Front CR480 fender is faded but is not cracked. Rear CR480 fender is in good clean shape. Seat does not have any rips or tears. Foam feels nice and comfy. The aluminum Inter-Am handlebars are in good shape. After market controls work decently well also. The shorty clutch lever makes the clutch pull seem a bit firm. Throttle operates decently. The upper end of the throttle cable housing is separated from the end cap on the housing. Still works OK. Has a SUPER COOL solid aluminum exhaust valve cover with manual decompressor device built it. Cable is hooked up to a lever on the handlebar. All these parts work nicely. This bike was casually trail ridden in the Oregon coastal mountains for several years before being parked. Exact mileage on engine and performance parts is UNKNOWN. Mileage on the speedometer reads 9369. Bob said these meter was purchased at a local salvage yard though. Right before we purchased it Bob removed the top end to inspect for wear. All looked great and was reassembled with new gaskets. Bike starts and runs cleanly. No smoke. No unusual knocks, ticks or smoke, Transmission shifts smoothly. All kickstart parts operate properly too. This is an old bike with a lot of cool parts on it. Lots of time and effort was spent on this bike way back in 1985 to make it what it is. Bob is very meticulous. He was a auto-body paint shop owner and was also known to build custom tube-frames for sand rails. With a couple new fenders, number plates and perhaps that Bill Bell MR250 gas tank you would have quite the vintage racer!!!! Or simply ride and enjoy as-is. This bike does not have any remaining warranty. Sold as-is. With any 39 year old bike you will need to clean/replace/adjust/tune to your specific needs. If you have specific questions please ask them via the ebay message system. Yes we do ship anywhere in the USA 48 states !!!!We are Bill's Motorcycles Plus in Salem Oregon. Award winning, long time "real-deal" Gas-Gas and Husqvarna motorcycle dealer and riders. Oregon Dealer # DM0280.If you have questions please call toll free 1-888-806-1153 and ask for Bill Shipping and crating is available within the USA 48 states. Shipping to your local business with a fork lift or local shipping terminal approx. cost is $250-450 depending on your location and distance from us. Call or ask for shipping quotes, please include your zip code.Please no bidders below +5 current feedbacks. Any new members or zero feedbackers must please call us first to communicate interest and intent to complete payment in case they should win the auction. Zero feedbackers who do not do so will be blocked. On Jan-22-16 at 13:42:14 PST, seller added the following information: CLEAN AND CLEAR OREGON TITLE.

Trim XL350 Baja Bullet

Honda : CT 1969 honda ct 90 trail

Honda : CT 1969 honda ct 90 trail

$2,000

Salem, Oregon

Year 1969

Make Honda

Model CT

Category Off Road Motorcycles

Engine 90

Posted Over 1 Month

This bike is a complete restoration. And it looks and runs great.It’s a frame up restoration. Frame and all metal parts were parts sand blasted andpowder coated. All chrome parts were re-chromed. It has new brakes, tires rimsspokes, seat, exhaust system, wiring harness, brake cables, throttle cables, headlightbucket, side covers. Engine and carb are completely rebuilt. Has about 20 miles on itsince restoration. I have two CT-90’s and one CT200. I have restored and I need the room.There were many other things done to these bikes, too numerous to mention.I also have several boxes of CT90 parts that will go alone with these bikes. This is one of two CT90’s I have listed. They are beautiful bikes and have clear titles and restoration.Feel free to ask questions and international buyers are always welcome.Please note; all of the items I sell are on eBay and are considered to be antiques, they are not new, and carry no warranty.Please read the item description, I worked really hard to tell it like it is, so we can both be happy with our experience. Every attempt has been made to describe them accurately and thoroughly without boring the audience. Again feel free to as questions before you bid; I will do my best to answer all questions.

Husqvarna : FC250 NEW 2015 Husqvarna FC250 Motocrosser 5-Speed Electric Start 4-Stroke

Husqvarna : FC250 NEW 2015 Husqvarna FC250 Motocrosser 5-Speed Electric Start 4-Stroke

$5,975

Salem, Oregon

Year 32767

Make Husqvarna

Model FC250

Category Off Road Motorcycles

Engine 250

Posted Over 1 Month

New 2015 Husqvarna FC250. New, in stock and in limited quantities we have for you, the 2015 Husqvarna FC250. 5-speed MX model. Electric start. Reserve price is CLOSE TO $2000 below the MSRP of $8149 !!!!!!!!!!! WE DO NOT CHARGE ORIGINAL FREIGHT FEES, SET UP FEES OR DOC FEES! We are Bill's Motorcycles Plus in Salem Oregon. Award winning, long time "real-deal" Husqvarna motorcycle dealer and riders. Oregon Dealer # DM0280. If you have questions please call toll free 1-888-806-1153 and ask for Lon or Bill. Local guys ask about the green cash in hand discount!!!! Great financing is also available for local buyers. As low as $119mo for 60mo OAC!!!!!! Sorry no out of state financing. You must be here in person!!!!!! Shipping and crating is available within the USA 48 states. Shipping to your local business with a fork lift or local shipping terminal approx. cost is $350-500 depending on your location and distance from us. Call or ask for shipping quotes, please include your zip code. We personally own one of these FC250's and it is one of the most fun bikes we have ever ridden on the track and in the woods. All of Bill's bikes are assembled, pre-delivered and test ran so that when you get it, IT IS READY TO RIDE!!! If we crate and ship a bike to you the front wheel and handlebars will need to be installed.Great deals on all in-stock models. 2015 $9995 FE350S $0 DOWN $190 FOR 60 MONTHS 2015 $7495 FC450 $0 DOWN $151 FOR 60 MONTHS 2015 $7795 FC350 $0 DOWN $167 FOR 60 MONTHS 2015 $8495 FE350 $0 DOWN $167 FOR 60 MOS. 2015 $9949 FE501 $0 DOWN $188 FOR 60 MOS. 2015 $8449 TE250 $DOWN $158 FOR 60 MOS. 2015 $6995 TE125 $0 DOWN $135 FOR 60 MOS. 2015 $6795 TC250 $0 DOWN $139 FOR 60 MONTHS 2015 $5995 TC125 $0 DOWN $116 FOR 60 MONTHS 2012 $5995 TXC511 $0 DOWN $110 FOR 60 MONTHS

Trim 250F 4 Stroke MX Bike