Motorcycles for sale in Doerun, Georgia

1-9 of 9

Sort By

2008 Harley-Davidson Dyna  2008 Harley Davidson FXDC SuperGlide

2008 Harley-Davidson Dyna 2008 Harley Davidson FXDC SuperGlide

$7,500

Doerun, Georgia

Year 2008

Make Harley-Davidson

Model Dyna

Category -

Engine -

Posted Over 1 Month

Motorcycle is in excellent condition. Kept in an enclosed shop when not driven. Includes a single mustang seat and a double sundowner seat that can be changed out when you have a passenger.

Trim FXDC

2008 Harley-Davidson DYNA SPORT GLIDE

2008 Harley-Davidson DYNA SPORT GLIDE

$7,200

Doerun, Georgia

Year 2008

Make Harley-Davidson

Model DYNA SPORT GLIDE

Category -

Engine -

Posted Over 1 Month

Motorcycle is in excellent condition. Kept in enclosed shop when it's not driven. Only has 15,800 miles. Only used for recreational purposes since I bought the bike in 2012. Includes a single mustang seat as pictured plus has a double sundowner seat can be changed out if you have a passenger.

2005 Harley-Davidson FXSTI Softail

2005 Harley-Davidson FXSTI Softail

$4,000

Doerun, Georgia

Year 2004

Make Kawasaki

Model KX 250

Category -

Engine -

Posted Over 1 Month

Low Hour Survivor Bike, Less than 20 Original Hours!! © craigslist - Map data © OpenStreetMap (google map) 2004 KX250 fuel: gas transmission: manual more ads by this user 2004 KX 250 in absolutely PERFECT condition. Original piston survivor bike with around 40 hours. New Pro Taper Contour fat bars with CR High bend, new grips, chain and sprockets, new plastics with updated graphics, new control cables, recent fork seals and rear shock serviced, new seat cover and foam, wide aftermarket foot pegs, FMF Gold Series pipe and Shorty silencer, new tires, tubes, rim strips and bead locks, stainless front brake line with factory brake pads, new chain slider and guide and much more. Fresh coolant, brake fluid and trans oil. This bike is as close to new as these last gen KX smokers can possibly get. Asking $4000.....if you want a bike to ride and NOT wrench on, one that gets attention even sitting still, then this may be it! This bike was treated to a complete frame up restoration....every nut bolt and component was inspected and cleaned before assembly. If you want a cheap $1500 clunker, then this bike is not for you. Serious inquiries only, no trades!

2005 Harley-Davidson Dyna Wide Glide

2005 Harley-Davidson Dyna Wide Glide

$7,400

Doerun, Georgia

Year 2003

Make Harley-Davidson

Model Springer SOFTAIL

Category Cruiser Motorcycles

Engine 1,450 cc

Posted Over 1 Month

2003 Harley-Davidson Springer SOFTAIL, 2003 Harley Davidson Softail Springer Custom paint job, 16 inch apes, Harley reaper front rim, and solid chrome back wheel. Boom audio. Vance & Hines big radius pipes $7,400.00 2297980327

2007 Honda Cr Series 125R5

2007 Honda Cr Series 125R5

$3,450

Doerun, Georgia

Year 2007

Make HONDA

Model Cr Series 125R5

Category Dirt Bikes

Engine 125 cc

Posted Over 1 Month

2007 Honda Cr Series 125R5, Up for sale is a truly rare find..... a low-hour 2007 CR125R with all the goodies. These last-generation aluminum frame CRs and the best and last 2 strokes Honda made and the 07's represent the pinnacle of Honda 2 stroke performance and reliability. The turning and suspension characteristics of this chassis are stellar and the engine has all the over-rev roosting power you would expect....all that with predictable Honda workmanship. In addition to a clean and solid unmolested chassis, this particular bike features- -recent piston, rings, air filter and V-Force3 reeds -properly jetted Mikuni TMX TPS carb for decent low-end grunt and outstanding upper rev potential -recent clutch kit -new x-ring chain, slider, guide, rollers and sprockets -V-Force3 reeds for even more power -recent tires, tubes on front and rear -new Pro Wheel Gen 3 rear wheel with stainless spokes -new plastics and modern graphics -new bars and cross bar pad -new control cables -new fork bleeders -recent fork seals and fork oil changed - rear shock serviced -fresh trans oil, brake fluid and engine coolant -OEM radiators -recent FMF Fatty expansion chamber and shorty silencer -wheel bearings checked and lubed -all steering and rear suspension linkage bearings cleaned, checked and lubed -new grips and throttle tube -new Trackside unbreakable and adjust-on-the-fly clutch perch and front brake levers with easy-pull lever geometry -new brake pads. During the teardown and rebuild of my restorations, I go through every component, system and assembly to ensure everything is in spec- replacing worn parts with OEM and quality aftermarket parts. The result is a legendary 2 smoker ready to ride without the hassles normally associated with used dirt bikes. LOTS of people sell used bikes- I sell off-road works of art that incorporate modern style into the beloved bikes of yesteryear. Check out all the fasteners and frame spars- this bike was gently ridden and well-cared for before I bought it from the previous owner. I then performed a thorough frame-up restoration; replacing worn parts, addressing all issues and servicing all components per the OEM Honda workshop manual. I DO NOT "FLIP" BIKES- I buy solid 2 strokes that have tons of potential and then, through many many hours of patience and dedication, bring this potential to light for a few lucky riders! Of course, you can buy a $1500 bike- there are plenty of them out there. THAT machine will not only leave you stranded on your first ride but later cost you hundreds of dollars, countless hours of wrenching and time lost that you could be riding a bike bought from me.....knowing that your ride was built by someone who knows and loves 2 strokes. See my Facebook page "Honda 2 Stroke" in Doerun, Ga. for more pics of this bike, as well as pics of past, present and future projects. 2298814080 $3,450.00 2298814080

Honda : CR 2007 07 honda cr 125 fully restored 2 stroke powerhouse mx dirt bike

Honda : CR 2007 07 honda cr 125 fully restored 2 stroke powerhouse mx dirt bike

$3,450

Doerun, Georgia

Year 2007

Make Honda

Model CR

Category Off Road Motorcycles

Engine 125

Posted Over 1 Month

Up for sale is a truly rare find..... a low-hour 2007 CR125R with all the goodies. These last-generation aluminum frame CR 2 smokers and the best and last 2 strokes Honda made and the 07's represent the absolute pinnacle of Honda 2 stroke performance and reliability. The turning and suspension characteristics of this chassis are nothing short of stellar and the engine has all the over-rev and roosting power you would expect....all that with predictable Honda workmanship, fit and finish. In addition to a clean and solid unmolested chassis, this particular bike features- -recent piston, rings, air filter and V-Force3 reeds -properly jetted Mikuni TMX carb for decent low-end grunt and outstanding upper rev potential -recent clutch kit -new x-ring chain, slider, guide, rollers and sprockets -V-Force3 reeds for even more power -new tires and tubes front and rear -new Pro Wheel Gen 3 rear wheel with stainless spokes -new plastics and modern graphics -new bars and cross bar pad -new control cables -recent fork seals and fork oil changed -fresh trans oil, brake fluid and engine coolant -OEM radiators -new FMF Fatty expansion chamber and shorty silencer -wheel bearings checked and lubed -all steering and rear suspension linkage bearings cleaned, checked and lubed -new grips and throttle tube -new unbreakable and adjust-on-the-fly clutch perch and front brake levers with easy-pull lever geometry -new brake pads Check out all the fasteners and frame spars- this bike was gently ridden and well-cared for before I bought it from the previous owner. I then performed a thorough and detailed frame-up restoration; replacing worn parts, addressing any and all issues and servicing all components per the OEM Honda workshop manual. I DO NOT "FLIP" BIKES- I buy solid 2 strokes that have tons of potential and then, through many many hours of patience and dedication, bring this potential to light for a few lucky riders! Of course, you can buy a $1500 bike- there are plenty of them out there. THAT machine will not only leave you stranded on your first ride but later cost you hundreds and hundreds of dollars, countless hours of frustrated wrenching and time lost that you could be riding a bike bought from me.....knowing that your ride was built by someone who knows and loves 2 strokes. When perusing used bikes, you may notice that most of them are covered from bars to wheels in mud or still soaking wet from the only washing since the first Bush was President. I don't use mud, dirt, water or gallons of Armor All to disguise a bike's issues. My machines appear just as they really are- low-hour 2 smokers built with pride and knowledge. Customers constantly tell me that my bikes look even better in person- I guess that says it all!! Please note that this bike is listed in many local selling arenas and I reserve the right to end this listing early if it sells elsewhere. Buyer is welcome to pick the bike up in person or they can arrange for shipping after payment is made. I will do everything possible to assist but the buyer is responsible for all shipping arrangements and costs. A $500 non-refundable PayPal deposit is required immediately by the winning bidder or the bike will be relisted. Remainder of balance can be paid by cash, cleared check or PayPal if buyer pays all related fees. For questions or to make arrangements, please call Vince 229 881 4080. My home state of Georgia does not title off road machines but I will give the buyer a bill of sale so they can get a title if desired. Please see my Facebook page "Honda 2 Strokes" in Doerun, Ga. for work-in-progress pics of this machine as well as pics of other past, future and present projects. I am always looking for more projects and usually have at least one completed restoration for sale and at least one in the works. Please "like" and follow my FB page to get future updates......thanks for looking, please ride safe and BRAAAAAAAP ON!!

Trim 125R

Honda : CR 2003 cr 125 r time capsule low hour restoration

Honda : CR 2003 cr 125 r time capsule low hour restoration

$2,950

Doerun, Georgia

Year 2003

Make Honda

Model CR

Category Off Road Motorcycles

Engine 125

Posted Over 1 Month

Up for sale is a rare find..... a low-hour 2003 CR125R with all the goodies. These last-generation aluminum frame CR 2 smokers and the best and last Honda 2 stroke made and they represent the pinnacle of Honda 2 stroke performance and reliability. The turning and suspension characteristics are nothing short of stellar and the tried-and true engine has all the over-rev and roosting power you would expect....all that with predictable Honda workmanship, fit and finish. In addition to a clean and solid unmolested chassis, this particular bike features- - recent piston, rings, air filter and reeds (only the second top end counting the original) -properly jetted Mikuni carb for decent low-end grunt and outstanding rev potential -recent clutch kit -new chain, slider, guide, rollers and sprox -V-Force3 reeds and cage for even more power -recent tires and tubes front and rear -new plastics and graphics -new bars and bar pad -new control cables -recent fork seals and fork oil changed -fresh trans oil, brake fluid and engine coolant -new oversized radiators for additional cooling on those long hot rides -FMF expansion chamber and shorty silencer with fresh packing -wheel bearings checked and lubed -all steering and rear suspension linkage bearings cleaned, checked and lubed -new grips -Adjust-on-the-fly clutch perch with easy-pull lever geometry -new front and rear brake pads Check out all the fasteners and frame spars- this bike was only gently ridden and well-cared for before I bought it from the original owner. I then performed a thorough and detailed frame-up restoration; replacing worn parts, addressing any and all issues and servicing all components per the OEM Honda workshop manual. I DO NOT "FLIP" BIKES- I buy solid 2 strokes that have tons of potential and then, through many many hours of patience and dedication, bring this potential to light for a few lucky riders! Of course, you can buy a $1500 bike- there are plenty of them out there. THAT machine will not only leave you stranded on your first ride but later cost you hundreds and hundreds of dollars, countless hours of frustrated wrenching and time lost that you could be riding a bike bought from me.....knowing that your ride was built by someone who knows and loves 2 strokes. Simply put, I do what you would do- buy a bike that is already clean with low ride time and then go thru it bolt by bolt until it's almost perfect!! When perusing used bikes, you may notice that most of them are covered from bars to wheels in mud or still soaking wet from the only washing since the first Bush was President. I don't use mud, dirt, water or gallons of Armor All to disguise a bike's issues. My machines appear just as they really are- low-hour 2 smokers built with pride and knowledge. Customers constantly tell me that my bikes look even better in person- I guess that says it all!! Please note that this bike is listed in many local selling arenas. I reserve the right to end this listing early if it sells elsewhere. If you are interested in this machine, please call Vince 229 881 4080 for more details or to discuss arrangements. Don't let this one slip by- not since 2007 (the LAST year of new Honda 2 strokes) can you get a perfect, problem free smoker that will make you grin during every ride.....put away your wrenches and get ready to enjoy yourself for once!! Please see my Facebook page "Honda 2 Strokes" in Doerun, Ga. for work-in-progress pics of this machine as well as pics of other past, future and present projects....thanks for looking and BRAAAAAAAP ON!!

Trim CR125R

Suzuki : RM 2002 suzuki rm 250 low hours time capsule

Suzuki : RM 2002 suzuki rm 250 low hours time capsule

$3,450

Doerun, Georgia

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

Up for sale is a rare and hard-to-find low hour example of Team Yellow's premier 2 stroke MX rolling iron. This 2002 Suzuki RM 250 came from a gentleman in northern Florida who only had put around 20 hours of ride time on this bike, which was bought new by him in 2008. I bought it and performed a total frame-up restoration to ensure EVERYTHING was in "as new" condition. THIS IS NOT A BIKE THAT HAS BEEN THRASHED AND TRASHED......this is a cream puff 2 smoker that looks and runs better today than it did on the showroom floor back in 02!!! It is my very great pleasure to bring these bikes back to new life- whether on the track, on the trails or in someone's private collection. In addition to the original specs of this time capsule MXer, this particular bike features..... -power valve cleaned and adjusted -properly jetted stock Kehin TPS carb with crisp, smooth power down low and a ripping top end -new Kenda MX tires,tubes, rim strips and bead locks front and rear with stock Excel wheels and stock hubs -front and rear suspension fluids and all bearings serviced -all fluids (coolant, trans oil and brake) flushed and changed -front and rear wheel bearings inspected and lubed and all linkages inspected and lubed -stock OEM plastics (except fork guards, front and rear fenders) -new number plate backgrounds and quality graphics installed for a fresh and modern look -stock OEM bars with new grips and bar pad -all OEM control cables inspected and lubed -new gold X-ring chain and sprockets with all new OEM hardware -new rear and front OEM brake pads -stock OEM pipe and freshly re-packed stock silencer -new adjustable AOF clutch perch -new air filter -all chain guides ,sliders and rollers inspected and replaced as needed As you can see from the frame spars, sparkling hardware and stock plastics, this baby is a genuine low-hour machine that has been made even better with the addition of a few functional and tasteful aftermarket and new OEM parts. Everything works like it should and is ready for the trails or track!! It's riding season again....this year, spend more time RIDING and less time WRENCHING on a $1500 Craig's List "special"... instead, buy a bike that has already been gone through top to bottom by an avid 2 stroke enthusiest and is ready to rip!! Save thousands of $$$$$ over buying a brand-new bike!!!! I buy, sell, ride and restore 2 strokes and all my bikes are assebled by someone who knows and loves these machines! Please see my Facebook page "Honda 2 Strokes" in Doerun, Ga. for pics of past, present and future projects or to inquire about selling your current bike or even to have a custom bike built to your specs. For questions and info, call Vince @ 229-881-4080. This bike is listed for sale in many local arenas and I reserve the right to end the auction early if it sells elsewhere. FYI- most of my bike auctions end early so don't hesitate to bid or to contact me!! I cannot ship this bike and I prefer old-fashioned face-to-face transactions. I do, however, realize this is not always possible and will work with a serious buyer to help meet their needs if at all possible. There are many companies that specialize in shipping bikes if the buyer so choose and makes all the needed arrangements. The winning bidder is expected to pay an immediate and non-refundable deposit of $500.00 via Paypal and make arrangments with me for the balance upon pickup. Please make plans for pickup and payment ASAP after auction ends. If payment or pickup arrangements are NOT made within 48 hours, the bike will be re-listed. --ONE FINAL NOTE-- When perusing pics of used bikes for sale, you will notice most people take pictures when the bike is either still wet from the recent washing, muddy from bars to frame or slathered in Armor All...my bikes appear just as they are in person- clean low-hour machines that have been treated to precise and thorough restorations. I do NOT use water, mud or Armor All to hide problems or defects. Customers constantly tell me that although my bikes looks great in the pics, they look EVEN BETTER in person....that says it all!! I DO NOT "FLIP" BIKES....see my feedback and the pics of past projects on my Facebook page- I buy choice machines with tons of potential and, through hours of hard work and loving dedication, bring this potential to light for a few lucky riders....HAPPY BIDDING!!! Thanks for looking.......BRAAAAAAAP ON!!

Honda : CR 2003 CR125- LOW HOURS, TWO STROKE POWERHOUSE!!

Honda : CR 2003 CR125- LOW HOURS, TWO STROKE POWERHOUSE!!

$2,889

Doerun, Georgia

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

Up for auction is a rare and hard-to-find low hour example of the last generation of Honda 2 Stroke motorcross rolling iron. The 2002 and up CR's are known for predictable and precise turning characteristics and stellar suspecsion action. These qualities, along with the case-reed RC-powervalve engines, make this 125 THE CHOICE for those wanting the best in Honda 2 stroke technology. This 2003 CR125 has low low ride time and was rarely ridden by the owner I bought it from. I then performed a total and very thorough teardown and inspection to fully address any issues or problems. In addition to a aolid, low-hour 3rd-gen aluminum frame platform, this particular bike features... -BRAND NEW standard-bore cylinder and piston, reeds and all gaskets -power valve cleaned and adjusted -properly jetted stock Mikuni TMX carb with crisp, smooth power down low and a ripping top end -new Kenda MX tires and tubes front and rear with stock wheels (painted texture black) and stock hubs -front and rear suspension fluids and all bearings serviced -all fluids (coolant, trans oil and brake) changed -front and rear wheel bearings replaced and all linkages lubed -new plastics, number plates and quality graphics installed for a fresh and updated look -CR-bend bars with ODI locking grips and throttle tube -all new control cables new X-ring chain and sprockets -new rear and front OEM brake pads and new stainless brake lines for improved brake feel -new Pro Circuit pipe and freshly re-packed stock silencer -adjustable clutch perch -new seat cover -new air filter -new red billet foot pegs with stainless cleats -new larger-core radiators -new fork seals As you can see from the frame spars and engine cradle, this baby is a genuine low-hour machine that has been made even better with the addition of a few functional and tasteful aftermarket and new OEM parts. Everything works like it should and is ready for the trails or track!! It's riding season again....this year, spend more time RIDING and less time WRENCHING... buy a bike that has already been gone through top to bottom by an avid Honda 2 stroke enthusiest and is ready to rip!! Save thousands of $$$$$ over buying a brand-new bike!!!! I buy, sell, ride and restore Honda 2 strokes and all my bikes are assebled by someone who knows and loves these machines! Please see my Facebook page "Honda 2 Strokes" in Doerun, Ga. for pics of past, present and future projects or to inquire about selling your current bike or even to have a custom bike built to your specs. For questions and info, call Vince @ 229-881-4080. This bike is listed for sale in many local arenas and I reserve the right to end the auction early if it sells elsewhere. FYI- most of my auctions end early so don't hesitate to bid or to contact me!! I cannot ship this bike and I prefer old-fashioned face-to-face transactions. I do, however, realize this is not always possible and will work with a serious buyer to help meet their needs if at all possible. There are many companies that specialize in shipping bikes if the buyer so choose and makes all the needed arrangements. The winning bidder is expected to pay an immediate and non-refundable deposit of $500.00 via Paypal and make arrangments with me for the balance upon pickup. Please make plans for pickup and payment ASAP after auction ends. If payment or pickup arrangements made within 48 hours, the bike will be re-listed. --ONE FINAL NOTE-- When perusing pics of used bikes for sale, you will notice most people take pictures when the bike is either still wet from the recent washing, muddy from bars to frame or slathered in Armor All...my bikes appear just as they are in person- clean low-hour machines that have been treated to precise and thorough servicing. I do NOT use water, mud or Armor All to hide problems or defects. Customers constantly tell me that although my bikes looks great in the pics, they look EVEN BETTER in person....that says it all!! Thanks for looking.......BRAAAAAAAP ON!!