Ktm Xc F motorcycles for sale in Indiana

2016 KTM 250 XC-F

$6,595

Evansville, Indiana

Year 2016

Make KTM

Model 250 XC-F

Category -

Engine -

Posted Over 1 Month

2016 KTM 250 XC-F, FRESH OFF COMPLETE CHASSIS AND ENGINE OVERHAUL. NEW TOP END AND ALL NEW BEARINGS, FRESH SUSPENSION REBUILD. CLEAN BIKE!! 2016 KTM 250 XC-F Small-Bore Domination Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features May Include: ENGINEThe new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders.ENGINE MANAGEMENT SYSTEMThe completely reworked Keihin Engine Management System with electronic fuel injection features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar.CYLINDER HEADThe centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm.BRAKESHigh-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed and weight-reduced Wave discs made by GALFER featuring improved heat resistance. Weight reduction is 63g on the front disc, and 32 g for the rear. This is the ultimate solution in braking technology.FUEL TANKAll XC-F models have new lightweight polyethylene tanks fitted with an integrated fuel pump system and capacity of 2.25 gallons. Inside thre

2013 KTM 350 XC-F

$6,000

New Palestine, Indiana

Year 2013

Make KTM

Model 350 XC-F

Category -

Engine -

Posted Over 1 Month

I have a 2013 ktm 350 xc-f. I am the second owner of it, and have put on about 15hrs. It has 75hrs total. Runs perfectly! This was my first bike ever and it has been a extremely good bike. Tires have lots of tread still. It has a brand new front wheel, and lots of extras. Stock exhaust, rear disc brake, new front and rear sprocket, new chain, extra air filter, frame grips, front disc guard, full wrap around hand guards, unbreakable clutch and brake levers, new grips, ignition map switch on handlebars- has mild, stock, and wild modes! This bike is loaded. You will not be disapponted! It has never been raced, just used in the trails. Asking $6,000 OBO. Serious inquiries only, and no trades! I have manual, title from first owner, and bill of sale from first owner. Please contact me with any questions and I have more pictures!

2017 KTM 450 XC-F

$10,099

Hobart, Indiana

Year 2017

Make KTM

Model 450 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 XC-F HOLESHOT BRAGGING RIGHTS If maximum power is required there is no other way but the 450 XC-F. Motorcycles Competition/Off Road DX80396266842487364701256609 DX1 . the compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015...

2014 KTM 450 XC-F

$8,599

Evansville, Indiana

Year 2014

Make KTM

Model 450 XC-F

Category -

Engine -

Posted Over 1 Month

2014 KTM 450 XC-F, COME CHECK ONE OUT! Charlie Mullins often leads the GNCC pack aboard the potent XC-F. No wonder, as the compact SOHC engine with the groundbreaking injection technology guarantees brute but highly controllable power. Among the large 4-strokes, the 450 XC-F scores mainly with its performance and agility. It is the right choice for every cross-country rider looking for torque and power with lots of control for XC1 racing.

2015 KTM 1290 Super Duke R ABS

$7,995

Evansville, Indiana

Year 2016

Make KTM

Model 450 XC-F

Category -

Engine 27 ci cc

Posted Over 1 Month

Holeshot Bragging Rights If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015.

2007 Harley-Davidson STREET BOB

$8,295

Evansville, Indiana

Year 2016

Make KTM

Model 450 XC-F

Category -

Engine 442 cc

Posted Over 1 Month

2016 Ktm 450 XC-F, HOLESHOT HITTER! - Holeshot Bragging Rights If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015.

2017 KTM 350 XC-F

Request Price

Westfield, Indiana

Year 2017

Make KTM

Model 350 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 350 XC-F, 2017 KTM 350 XC-F THE ULTIMATE COMBINATION With the arrival of the new generation 350 XC-F the success story can continue. The nimble but powerful bike comprises of almost as much power as a 450, but with the agility of a 250 so the basic idea is easily summarized, and has been a concept with success from the start. Features may include: ENGINE The new DOHC (Double Overhead Camshaft) engine of the 350 XC-F features a completely new construction in order to make it even more compact and powerful than before. Fitted with the latest electronic fuel injection system, it has a very wide and usable power spread while still delivering high performance. The new design has made the engine 20 mm shorter than before, while reducing the weight by 2 lbs. CYLINDER HEAD The new cylinder head features an improved combustion chamber geometry, two overhead camshafts with a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and high-flow ports. In conjunction with new valve springs and retainers for the four lightweight titanium valves (intake 36.3 mm, exhaust 29.1 mm) the flow rate has been maximized for an optimal power band with more performance across the entire range, which peaks at 13,400 rpm. The peak performance now is at 58 hp. CYLINDER AND PISTON In the redesigned and shorter cylinder, with a bore of 88 mm, works a weight-reduced forged bridged box-type piston made by CP. Its new piston crown geometry is adapted to the new high-compression combustion chamber and stands out with its extra rigid structure and low weight. Thanks to the low oscillating masses, the engine is extremely lively. The compression ratio is 14:1. ELECTRIC STARTER The new 350 XC-F is fitted with an electric starter as standard, which a clear advantage when it comes to crunch time in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight reduced starter drive guarantees more efficient and reliable starting CLUTCH The highly compact CSS clutch (Coil Spring Steel) features a weight reduced, wear-free steel basket, and now seven instead of eight clutch plates, which are extremely heat resistant due to their steel carrier discs. In addition, a reworked inner hub and a pressure plate guarantees a better oil supply along with even better cooling of the clutch. A smaller master cylinder diameter of the Brembo hydraulic clutch system provides lighter pull and precise modulation CRANKSHAFT The new 350 XC-F's crankshaft is lighter and features a stiffer design than before. It utilizes a shorter connecting rod, contributing to the compact and light engine with a snappy power delivery. This design is a major prerequisite for the extremely high engine speed levels and the unrivalled maximum power of the 350 cm³ engine. Not only that, it enhances the engine's durabi

2017 KTM 250 XC-F

Request Price

Westfield, Indiana

Year 2017

Make KTM

Model 250 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 250 XC-F, 2017 KTM 250 XC-F SMALL-BORE DOMINATION Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features may include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. CYLINDER & PISTON In the reworked and shorter cylinder that has a bore of 78 mm, is a weight-reduced, forged bridged box-type piston made by CP. It features a unique piston shape adapted to the new combustion chamber and stands out with its extra-rigid structure, combined with a low weight. The compression ratio is at 14.4:1. Thanks to the low oscillating masses, the engine offers extremely lively characteristics. COUNTER BALANCER SHAFT In order to balance the mass-forces, the new 250 XC-F engine uses a multifunctional counter balance shaft that also drives the water pump and timing chain. It features new sprockets fitted to the new timing chain. ELECTRIC STARTER The new 250 XC-F is fitted with an electric starter as standard, which a clear advantage in the heat of battle. A new starter motor made by Mitsuba (modified for easy disassembly) and a weight-reduced starter drive guarantees more efficient and reliable starting. ENGINE CASES AND COVER The completely new design of the die-cast engine cases allowed for a much more centralized shaft configuration. The engine is now shorter by 20 mm, contributing to a much more centralized mass. Newly designed engine covers made of ma

2017 KTM 450 XC-F

Request Price

Westfield, Indiana

Year 2017

Make KTM

Model 450 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 XC-F, 2017 KTM 450 XC-F HOLESHOT BRAGGING RIGHTS If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015. Features may include: AIRBOX The new airbox design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in conjunction with lighter intake snorkel that is made of a new material to reduce the deformation due to air intake pulse for improved performance. The new Twin Air filter is easier and safer to mount and can be changed without tools in seconds, a standard and original KTM feature. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For MY 2017 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. SEAT Ergonomically perfect, the new seat has a higher foam volume, which offers great comfort and durability, while weighing the same as the previous model. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling, and last but not least it´s lighter than the previous model. GRAPHICS New modern in-mold graphics highlight the Ready to Race character of the cutting-edge 2017 XC-F range of bikes. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. FOOTPEG A new sophisticated "No-Dirt" footpeg solution prevents dirt from blocking the pegs in order to keep them in the correct position, even when dragging in deep ruts. In addition, the new footpegs are larger, lighter and more stable, providing better grip.

2009 KTM 250 XC

$2,997

Terre Haute, Indiana

Year 2009

Make KTM

Model 450 XC-F

Category Motocross Bikes

Engine -

Posted Over 1 Month

2009 KTM 450 XC-F,

2015 KTM 1190 RC8 R

$6,199

Westfield, Indiana

Year 2015

Make KTM

Model 250 XC-F

Category Dirt Bikes

Engine -

Posted Over 1 Month

2015 KTM 250 XC-F, 2015 KTM 250 XC-F XC-2 DOMINANCE Features May Include: ENGINE MANAGEMENT SYSTEM (EMS) In combination with the revolutionary injector position as developed by KTM, the Keihin Engine Management System with electronic fuel injection and 44mm throttle body provides spontaneous throttle response & the possibility to change characteristics or read engine data with the PowerParts User-Setting-Tool. With an optional map-select switch from the PowerParts program the EMS allows for selecting different engine characteristics. In addition, the optional User-Setting-Tool provides the ability to analyze engine data with a laptop and change the ignition and injection mappings with a few mouse clicks. CYLINDER HEAD The centerpiece of the compact DOHC engine is its cutting-edge cylinder head with two overhead camshafts and DLC-coated followers a design that allows to break the engine speed sound barrier of 14,000 rpm. CRANKSHAFT The 250 crankshaft employs a plain big end bearing. Two force-fitted bearing shells run directly on the crank pin. This design is a major prerequisite for the extremely high engine speed levels and the unrivaled maximum power of the 250cc engine. It enhances the engine s durability, allowing a longer interval between crankshaft service. BALANCER SHAFT In order to balance the mass-forces, the 250 engine uses a multifunctional counter balance shaft which also drives the water pump and timing chain. The engine receives a new water pump cover with a new gasket in order to optimize the seal. BODYWORK In shaping the bodywork the KTM designers ergonomic and design focus was to achieve complete harmony between rider and bike. The front fender is a prime example of a molded polymer component, gaining maximum stability through a well thought-out structure and mounting system. FUEL TANK The XC s feature a large 2.6 gallon translucent fuel tank on the two stroke XC s and a 2.4 gallon translucent fuel tank on four strokes. The 1/4-turn fuel cap is easy to open and provides extremely quick refueling during a race. AIR BOX The airbox design offers maximum protection of the air filter against dirt while ensuring maximum airflow for top performance. The Twin Air filter can be changed without tools in seconds, a standard for KTM. HAND PROTECTION AND GRIPS Standard for all XC models, the hand guards use a new material for better impact resistance. New, softer two-compound grips are used on MY 2015 XC models for increased comfort and less stress on the rider s hands. BRAKES High-Tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. Being the class-leading brakes in offroad, they remain unchanged for MY 2015. WHEELS

2016 KTM 350 XC-F

Request Price

Westfield, Indiana

Year 2016

Make KTM

Model 350 XC-F

Category Dirt Bikes

Engine -

Posted Over 1 Month

2016 KTM 350 XC-F, 2016 KTM 350 XC-F The Ultimate Combination With the arrival of the new generation 350 XC-F the success story can continue. The nimble but powerful bike comprises of almost as much power as a 450, but with the agility of a 250 so the basic idea is easily summarized, and has been a concept with success from the start. Features May Include: ENGINE The new DOHC (Double Overhead Camshaft) engine of the 350 XC-F features a completely new construction in order to make it even more compact and powerful than before. Fitted with the latest electronic fuel injection system, it has a very wide and usable power spread while still delivering high performance. The new design has made the engine 20 mm shorter than before, while reducing the weight by 2 lbs. 350 SX-F ENGINE CASES AND COVERS The completely new design of the die-cast engine cases allowed for a much more centralized shaft configuration, raising the crankshaft by 6 mm closer to the bike's center of gravity. Newly designed engine covers made of magnesium feature an advanced surface structure, which reduce the wear caused by the rider's boots. ENGINE MANAGEMENT SYSTEM The completely reworked Keihin Engine Management System, with electronic fuel injection, features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For 2016 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. In addition the handlebar-mounted map switch allows easy selection of different maps and the activation of a launch control. FUEL TANK All XC-F models have new lightweight polyethylene tanks fitted with an integrated fuel pump system and capacity of 2.25 gallons. Inside threads on the filler cap make for an easy and reliable closure. MONOSHOCK The new generation of monoshock made by

2016 KTM 450 XC-F

Request Price

Westfield, Indiana

Year 2016

Make KTM

Model 450 XC-F

Category Dirt Bikes

Engine -

Posted Over 1 Month

2016 KTM 450 XC-F, 2016 KTM 450 XC-F Holeshot Bragging Rights If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015. Features May Include: ENGINE With new features such as more compact dimensions, stronger performance throughout the rev range and a weight reduction of 4 lbs, this newly developed powerplant is the lightest 450 engine on the off-road market. With a reworked single overhead camshaft cylinder head and the latest electronic fuel injection, the 450 XC-F has unrivalled power of more than 62 hp and a highly efficient power delivery. ENGINE CASES AND COVERS The completely new design of the die-cast engine cases allows for a much more centralized shaft configuration, raising the crankshaft by 7 mm and 9 mm backwards to centralize mass and for a weight savings of 1.2 lbs. Newly designed engine covers made of magnesium feature an advanced surface structure in order to reduce the wear caused by the rider's boots. ENGINE MANAGEMENT SYSTEM The completely reworked Keihin Engine Management System, with electronic fuel injection, features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar. MONOSHOCK The new generation of monoshock made by WP Suspension has been developed for the new XC models in conjunction with the new frame and swingarm architecture, including the reworked linkage system and the new WP forks. The new body features a revised reservoir for a larger gas chamber to reduce performance fade. The linkage system has also been reworked with a revised geometry and longer pull rods. WEIGHT REDUCTION The main target for the KTM engineers when developing the new XC-F generation was a massive weight reduction in conjunction with improved handling. The resulting loss of nearly 8 lbs is outstanding, making the new KTM models the lightest bikes on the track, even with electric starting. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. In addition the handlebar-

2016 KTM 250 XC-F

Request Price

Westfield, Indiana

Year 2016

Make KTM

Model 250 XC-F

Category Dirt Bikes

Engine -

Posted Over 1 Month

2016 KTM 250 XC-F, 2016 KTM 250 XC-F Small-Bore Domination Already known for its strong performance, the new generation 250 XC-F presents itself with a newly developed, stronger engine built into an all-new chassis. The performance combination of a powerful and much torqueier engine in a lightweight and agile chassis is sure to make the 250 XC-F the star of the show for the future. Features May Include: ENGINE The new 250 XC-F engine is based on the similar overall design of its predecessor, with some major refinements to make this power plant more compact and lighter, with the production of improved torque and power across the entire rpm range. Perhaps one of the most impressive benefits of the new design is a weight reduction of 2 lbs, while still including the incredibly beneficial electric starter. The reworked engine guarantees an improved power curve over the entire rev range up to 14,000 rpm, which makes the new 250 XC-F a winner for both amateur and professional riders. ENGINE MANAGEMENT SYSTEM The completely reworked Keihin Engine Management System with electronic fuel injection features an all-new 44 mm throttle body, which provides instantaneous response and maximum performance thanks to a revolutionary injector position. The new ECU (Engine Control Unit) includes a launch control for more efficient starts with the provision of different maps according to the gear sensor selection. In addition, the rider can activate an optional map for a different power delivery via the map select switch on the handlebar. CYLINDER HEAD The centerpiece of the compact DOHC (Double Overhead Camshaft) engine is the new cutting-edge cylinder head. It features improved combustion chamber geometry, two 150 g lighter overhead camshafts with new timing, plus a friction-optimized super-fine surface, new finger followers with a 30 % harder DLC coating and a reworked timing drive (friction reduced and shorter DID timing chain, new sprockets and chain guides). New valve springs and retainers for the four lightweight titanium valves (intake 32.5 mm, exhaust 26.5 mm) and high-flow ports create a maximized flow rate for an optimal power band and maximum performance, all the way up to a redline of 14,000 rpm. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed and weight-reduced Wave discs made by GALFER featuring improved heat resistance. Weight reduction is 63g on the front disc, and 32 g for the rear. This is the ultimate solution in braking technology. FUEL TANK All XC-F models have new lightweight polyethylene tanks fitted with an integrated fuel pump system and capacity of 2.25 gallons. Inside threads on the filler cap make for an easy and reliable closure. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength