Ktm 450 motorcycles for sale in Union City, Tennessee

2017 KTM 450 EXC-F Six days

Request Price

Union City, Tennessee

Year 2017

Make KTM

Model 450 EXC-F Six Days

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 EXC-F Six days, 2017 KTM 450 EXC-F Six days SIX DAYS, SIX WINS KTM has ruled offroad for decades. The special edition SIX DAYS models celebrate this success with special performance upgrades and top-of-the-line components. In 2016 the ISDE (International Six Days Enduro) will be held in Navarra, Spain and the KTM model line-up has been suitably equipped to handle anything the dusty and rocky terrain can throw at it. Arriba! Features may include: FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a half of a pound lighter than its predecessor. ENGINE MANAGEMENT SYSTEM The state-of-the-art Keihin Engine Management System with electronic fuel injection features an all-new 42mm throttle body. Thanks to its unique injector position, the engine s response gives a whole new meaning to the word instantaneous . And to make life even easier, separate systems for cold starts and idle adjustment await you. Push the throttle back when the engine s alive and well, and the cold start mode disengages. As a proud owner of a SIX DAYS 4-stroke model you can select a stronger power curve and activate the unique traction control system for maximized grip. A bonus mapping via the map select switch on the handlebar, brings even more ferocity to the game. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. The orange coating truly makes it stand out; precisely what an engineering

2017 KTM 350 EXC-F

Request Price

Union City, Tennessee

Year 2017

Make KTM

Model 450 EXC-F Six Days

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 EXC-F Six days, 2017 KTM 450 EXC-F Six days SIX DAYS, SIX WINS KTM has ruled offroad for decades. The special edition SIX DAYS models celebrate this success with special performance upgrades and top-of-the-line components. In 2016 the ISDE (International Six Days Enduro) will be held in Navarra, Spain and the KTM model line-up has been suitably equipped to handle anything the dusty and rocky terrain can throw at it. Arriba! Features may include: FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a half of a pound lighter than its predecessor. ENGINE MANAGEMENT SYSTEM The state-of-the-art Keihin Engine Management System with electronic fuel injection features an all-new 42mm throttle body. Thanks to its unique injector position, the engine s response gives a whole new meaning to the word instantaneous . And to make life even easier, separate systems for cold starts and idle adjustment await you. Push the throttle back when the engine s alive and well, and the cold start mode disengages. As a proud owner of a SIX DAYS 4-stroke model you can select a stronger power curve and activate the unique traction control system for maximized grip. A bonus mapping via the map select switch on the handlebar, brings even more ferocity to the game. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds. The orange coating truly makes it stand out; precisely what an engineering

2017 KTM 450 XC-F

Request Price

Union City, Tennessee

Year 2017

Make KTM

Model 450 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 XC-F, 2017 KTM 450 XC-F Features may include: HOLESHOT BRAGGING RIGHTS If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015. AIRBOX The new airbox design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in conjunction with lighter intake snorkel that is made of a new material to reduce the deformation due to air intake pulse for improved performance. The new Twin Air filter is easier and safer to mount and can be changed without tools in seconds, a standard and original KTM feature. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For MY 2017 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. SEAT Ergonomically perfect, the new seat has a higher foam volume, which offers great comfort and durability, while weighing the same as the previous model. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling, and last but not least it´s lighter than the previous model. GRAPHICS New modern in-mold graphics highlight the Ready to Race character of the cutting-edge 2017 XC-F range of bikes. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. FOOTPEG A new sophisticated "No-Dirt" footpeg solution prevents dirt from blocking the pegs in order to keep them in the correct position, even when dragging in deep ruts. In addition, the new footpegs are larger, lighter and mor

2017 KTM 450 SX-F

Request Price

Union City, Tennessee

Year 2017

Make KTM

Model 450 SX-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 SX-F, 2017 KTM 450 SX-F DROP THE HAMMER If gold is what you re after, a 450 SX-F is what you get. Thanks to its compact engine delivering explosive but controllable power, it s the weapon of choice for the Red Bull KTM Factory Team and the champion, Ryan Dungey. This READY TO RACE bike rules the AMA Supercross Championship. Its secret? Precise handling and arm-stretching grunt. Winners - line up here. Features May Include: 100.2 KG KTM engineers just love dropping weight year after year. The result: the 2017 SX models are the slimmest, lightest dirt bikes out there - even though the 4-strokes are equipped with an electric starter as a standard feature, while the competition still needs to be kickstarted. You can just focus on kicking ***. AIRBOX The airbox design offers maximum protection of the air filter while ensuring maximum airflow. The large twin-air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you could still pop a fresh one in with a face full of mud. Without tools. In seconds. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds FOOTPEGS Sophisticated ´No Dirt´ footpegs prevent clogging of the footpeg pivot, even when digging in deep ruts. Looking for a higher riding position? Then just mount the footpegs of the MY2017 EXC models, which are 6mm higher than the SX versions. HANDLEBAR KTM engineers sure know how to handle handlebars. This tapered one, made of high-strength aluminum by NEKEN, is fixed in damped rubber mounts and has two different positions. From 2017 onwards, the lower handlebar clamps are separated, while on the upper side a new bridge-type clamp guarantees more torsional stiffness. It s also easier to replace the bar in case it gets twisted in a nasty crash. ODI lock-on grips make grip changes easy which does not require any wire or glue to be secured. SWINGARM The cast aluminum design offers low weight and a perfect flex behavior. T

2017 KTM 250 SX-F

Request Price

Union City, Tennessee

Year 2017

Make KTM

Model 450 XC-F

Category -

Engine -

Posted Over 1 Month

2017 KTM 450 XC-F, 2017 KTM 450 XC-F Features may include: HOLESHOT BRAGGING RIGHTS If maximum power is required, there is no other way but the 450 XC-F. The compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power shares 95% of the parts with the bike of Ryan Dungey winning the AMA Supercross championship 2015. AIRBOX The new airbox design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in conjunction with lighter intake snorkel that is made of a new material to reduce the deformation due to air intake pulse for improved performance. The new Twin Air filter is easier and safer to mount and can be changed without tools in seconds, a standard and original KTM feature. BATTERY AND WIRING HARNESS As in the past, all new XC-F engines are fitted with the proven electric starter - a unique KTM feature and a major benefit at all levels of motocross racing. For MY 2017 the XC-F range fits a super compact and lightweight lithium-ion starter battery, providing safe starting of the engine while reducing the weight significantly. SEAT Ergonomically perfect, the new seat has a higher foam volume, which offers great comfort and durability, while weighing the same as the previous model. BRAKES High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling, and last but not least it´s lighter than the previous model. GRAPHICS New modern in-mold graphics highlight the Ready to Race character of the cutting-edge 2017 XC-F range of bikes. HANDLEBAR The new generation XC-F models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions. All 4-Stroke models feature a new throttle assembly with model-specific throttle cams for different opening characteristics and new ODI grips featuring lock-on fixing clamp on the left-hand side. FOOTPEG A new sophisticated "No-Dirt" footpeg solution prevents dirt from blocking the pegs in order to keep them in the correct position, even when dragging in deep ruts. In addition, the new footpegs are larger, lighter and mor

2017 KTM 450 SX-F FACTORY EDITION

Request Price

Union City, Tennessee

Year 2016

Make KTM

Model 450 XC-W

Category Dirt Bikes

Engine -

Posted Over 1 Month

2016 KTM 450 XC-W, 2016 KTM 450 XC-W The Benchmark The 450 XC-W is one of the most powerful enduro machines of its class. Combining low weight and high displacement, high-tech SOHC 4-stroke technology is the right choice for all who are looking for maximum performance. Features May Include: ENGINE Developed for tough off-road duty, the SOHC engine with 449.3cc is distinguished by an extremely compact design, easy maintenance and excellent durability at a minimal weight. Together with the Keihin EFI system, this provides unrivalled off-road specific performance and rideability. DDS CLUTCH The one-piece basket of the DDS clutch (damped diaphragm steel) is machined from solid high-tensile steel in one solid part together with the primary drive gear. This process guarantees unbeatable reliability and, together with the thin steel linings, contributes to the narrow engine width due to a compact rivet-less design. The diaphragm spring makes it possible to implement an additional rubber damping system inside the clutch hub, ensuring reliability for the transmission and excellent traction. Finally, the hydraulic clutch mechanism by Brembo in conjunction with the diaphragm spring provides a very light clutch operation and controllable modulation. ENGINE MANAGEMENT SYSTEM The Engine Management System by Keihin with electronic fuel injection via a 42mm throttle body ensures a snappy response and maximum engine performance. An oil-cooled 196 W alternator provides sufficient energy for the fuel injection, lighting and other electrical loads. With an optional map-select switch from the Power Parts program, the EMS can allow the rider to select different engine characteristics. In addition, the optional User-Setting-Tool provides the ability to readout engine data with a laptop and change the ignition and injection mapping with just a few mouse clicks. PISTON The lightweight, forged bridged box-type piston shares its high performance piston rings with the 450 SX-F. HANDLEBAR All XC-W models are fitted with super strong, tapered Neken handlebars made of high tensile aluminum alloy that can be mounted in four positions. Standard equipment hand guards made of a new 2-component polymer for durability and effective hand protection. COOLING SYSTEM The proven integrated KTM cooling system routes the coolant from the cylinder head through the frame triangle directly to the WP aluminum radiators. A radiator fan is standard equipment for the big displacement 450 XC-W. SUSPENSION/DAMPING The KTM 450 XC-W is fitted with a new front fork featuring newly designed fork boots with shorter offset, increased trail and a new suspension settings, optimally tuned to weight and engine. In addition, the fork features new fork guards allowing for easier cleaning. At the rear, a PDS shock absorber from WP Suspension works with a direct linkage to

2016 KTM 350 XCF-W Six Days

Request Price

Union City, Tennessee

Year 2016

Make KTM

Model 450 SX-F

Category Dirt Bikes

Engine -

Posted Over 1 Month

2016 KTM 450 SX-F, 2016 KTM 450 SX-F Holeshot Bragging Rights If maximum power is required, there is no other way but the 450 SX-F. This model has proven itself in the main championships around the world over the years. Thanks to its compact SOHC (single overhead camshaft) engine that delivers explosive but controllable power, it is the weapon of choice for the US KTM Factory Team and Ryan Dungey winning the AMA Supercross championship 2015. Features May Include: FRAME The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4° steeper steering angle and a 10 mm shorter wheel base contribute to better handling and last but not least it´s around 380 g lighter than the previous model. SWINGARM As on the predecessor models, the new SX generation features a reworked cast aluminium swingarm. The updated design offers reduced weight and an optimized flex behavior supporting the frame and suspension created with a single-component casting process. The weight reduction is 250 grams. MONOSHOCK The new generation of monoshock made by WP Suspension has been developed for the new SX models in conjunction with the new frame and swingarm architecture, including the reworked linkage system and the new WP forks. The linkage system has also been reworked with a revised geometry and longer pull rods, which was tested last season in most of the KTM factory bikes. FORKS The KTM SX models are fitted with a revolutionary new and super-lightweight WP fork, a 48 mm USD air-sprung fork developed by WP Suspension in close collaboration with KTM. It is a split fork with separate functions for each fork leg. The damping functions are on the right side, whereas the air spring is in the left. The left leg features a capsuled air cartridge. This air spring is easy to adjust to any rider weight via a single air valve and a standard fork air pump. The right fork leg integrates a completely new damping cartridge to fit single damping leg requirements, and the damping can be adjusted to the track conditions or the rider s preferences with a twist of a dial. The new fork with approximately 300 mm travel has outstanding response and excellent, very consistent damping characteristics, while also with a reduced weight of 1.4 kg compared to its predecessor. ENGINE With new features such as its much more compact dimensions, stronger performance throughout the rev range and a weight reduction of 1.8 kg, this newly developed powerplant is the lightest 450 engine on the MX market. With a reworked single overhead camshaft cylinder head and the latest electronic fuel injection, it is dist