Ktm 300 Xc W motorcycles for sale in Villa Park, Illinois

2008 Harley-Davidson VRSCDX/A - V-Rod Night Rod Special

$9,999

Villa Park, Illinois

Year 2017

Make KTM

Model 300 XC-W Six Days

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC-W Six Days, Check this one out, already accessorized for you to win that Enduro! 2017 KTM 300 XC-W Six Days SIX DAYS, SIX WINS KTM has ruled off-road for decades. The special edition SIX DAYS models celebrate this success with special performance upgrades and top-of-the-line components. In 2016 the ISDE (International Six Days Enduro) will be held in Navarra, Spain and the KTM model line-up has been suitably equipped to handle anything the dusty and rocky terrain can throw at it. Arriba! Features may include: FRONT SUSPENSION The all-new WP XPlor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. So the forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. In addition, a longer and sealed hydro-stop guarantees better resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new XPlor 48 fork - with approx. 300mm of travel - has outstanding response and damping characteristics and is about a half of a pound lighter than its predecessor. ENGINE MANAGEMENT SYSTEM The state-of-the-art Keihin Engine Management System with electronic fuel injection features an all-new 42mm throttle body. Thanks to its unique injector position, the engine s response gives a whole new meaning to the word instantaneous . And to make life even easier, separate systems for cold starts and idle adjustment await you. Push the throttle back when the engine s alive and well, and the cold start mode disengages. As a proud owner of a SIX DAYS 4-stroke model you can select a stronger power curve and activate the unique traction control system for maximized grip. A bonus mapping via the map select switch on the handlebar, brings even more ferocity to the game. FRAME The high-tech, lightweight chrome-moly steel frame is engineered for excellent handling, precise cornering and supreme stability. You can also count on high torsional rigidity and low longitudinal stiffness for better absorption of the energy created by the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 po

2017 KTM 300 XC-W

$9,099

Villa Park, Illinois

Year 2017

Make KTM

Model 300 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC-W, 2017 KTM 300 XC-W MORE THAN JUST LIGHTNING FAST 4-stroke rivals, beware: this tool might just be the sharpest in the shed. It s hard to find a better power-to-weight ratio in the world of Enduro. If you want torque by the bucket loads, a top-end to die for and a lightweight chassis ready to rise to any occasion, give this 300 cc lightning bolt a go. Features may include: CYLINDER The newly developed cylinder of the 300 XC-W, with a bore of 72mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. BODYWORK KTM R&D, Kiska Design and the factory racers had their say in shaping the plastics with one goal: complete harmony between rider and bike. Perfect ergonomics and contact points provide maximum comfort in movement on the XC-W. The I-beam structures of the front and rear fenders guarantee maximum stability and a low weight thanks to well thought-out construction and mounting. They also stay cleaner for longer. Cleaver brake hose routing on the front number plate prevents wear and tear. GRAPHICS New graphics convey the true READY TO RACE character of the 2017 XC-W model line. AIRBOX The airbox design, featuring new snorkels, offers maximum protection of the air filter against soiling, while ensuring maximum airflow in a quiet way. The new, large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you can pop a fresh one in with a face full of mud - without tools and in seconds. FUEL TANK The lightweight polyethylene tank has a capacity of 2.5 gallons. You will always be able to see how much fuel remains at a glance, thanks to the see-through plastic. By pushing the orange release button in the center of the filler cap, the bayonet mechanism makes refueling quick and easy. WHEELS The XC-W s wheels feature lightweight, CNC machined hubs and high-end Giant rims guaranteeing maximum stability at minimum weight. The wheels are fitted with the latest Maxxis tires. The rear tire features a reworked profile and internal structure for better grip under wet conditions and is more resilient to punctures. Take them wherever you like, traction will be there. SEAT Tai

2017 KTM 150 SX

$9,099

Villa Park, Illinois

Year 2017

Make KTM

Model 300 XC-W

Category -

Engine -

Posted Over 1 Month

2017 KTM 300 XC-W, 2017 KTM 300 XC-W MORE THAN JUST LIGHTNING FAST 4-stroke rivals, beware: this tool might just be the sharpest in the shed. It s hard to find a better power-to-weight ratio in the world of Enduro. If you want torque by the bucket loads, a top-end to die for and a lightweight chassis ready to rise to any occasion, give this 300 cc lightning bolt a go. Features may include: CYLINDER The newly developed cylinder of the 300 XC-W, with a bore of 72mm, has all-new ports and is fitted with a revised power valve system. This system features a sophisticated mechanism for the lateral support exhaust ports, providing smooth and controllable power on tap. Furthermore, it s possible to change the bike s power character in seconds thanks to two supplied powervalve springs. Limitless settings for different tracks and preferences are up for grabs. Throw everything you have at it; new water jackets in the cylinder and head will take care of excess heat and reworked lateral cylinder head brackets allow a more efficient fixation of the engine to the frame via two lightweight headstays. This is a serious piece of kit. BODYWORK KTM R&D, Kiska Design and the factory racers had their say in shaping the plastics with one goal: complete harmony between rider and bike. Perfect ergonomics and contact points provide maximum comfort in movement on the XC-W. The I-beam structures of the front and rear fenders guarantee maximum stability and a low weight thanks to well thought-out construction and mounting. They also stay cleaner for longer. Cleaver brake hose routing on the front number plate prevents wear and tear. GRAPHICS New graphics convey the true READY TO RACE character of the 2017 XC-W model line. AIRBOX The airbox design, featuring new snorkels, offers maximum protection of the air filter against soiling, while ensuring maximum airflow in a quiet way. The new, large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you can pop a fresh one in with a face full of mud - without tools and in seconds. FUEL TANK The lightweight polyethylene tank has a capacity of 2.5 gallons. You will always be able to see how much fuel remains at a glance, thanks to the see-through plastic. By pushing the orange release button in the center of the filler cap, the bayonet mechanism makes refueling quick and easy. WHEELS The XC-W s wheels feature lightweight, CNC machined hubs and high-end Giant rims guaranteeing maximum stability at minimum weight. The wheels are fitted with the latest Maxxis tires. The rear tire features a reworked profile and internal structure for better grip under wet conditions and is more resilient to punctures. Take them wherever you like, traction will be there. SEAT Tai

2016 KTM 300 XC-W

$8,699

Villa Park, Illinois

Year 2016

Make KTM

Model 300 XC-W

Category Dirt Bikes

Engine -

Posted Over 1 Month

2016 KTM 300 XC-W, 2016 KTM 300 XC-W Better Than Ever! The 300 XC-W has clearly proven what it can do in many offroad competitions. The combination of massive 2-stroke performance, unrivaled torque and a super agile chassis make it the first choice when the going gets really difficult. There is no better power-to-weight ratio on the market in a standard bike. The compact 2-stroke engine offers the strongest performance money can currently buy. A perfectly tuned exhaust control ensures a manageable power delivery, while the 6-speed gear box, specially geared for enduros, has always the right gear ratio on offer. With its enhanced cylinder head and reed valve, the 300 XC-W is better than ever. Features May Include: HANDLEBAR All XC-W models are fitted with super strong, tapered Neken handlebars made of high tensile aluminum alloy that can be mounted in four positions. Standard equipment hand guards made of a new 2-component polymer for durability and effective hand protection. OPTIMISED ENGINE The powerful KTM 300 XC-W engine fitted with 6-speed transmission and electric starter unites an unbeatable 2-Stroke power-to-weight ratio with outstanding performance and responsive handling. AIRBOX The air filter can be quickly replaced without the use of any tools, thanks to an ingenious airbox design guarantees optimum filter protection from flying dirt while creating maximum airflow for high performance. The airbox covers are manufactured in a 2-component process with in-mold graphics. In addition, two extra flaps on the left cover allow it to be secured with bolts if desired. COOLING SYSTEM The proven integrated KTM cooling system routes the coolant from the cylinder head through the frame triangle directly to the aluminum radiators made by WP. SUSPENSION/DAMPING The KTM 300 XC-W is fitted with a new front fork featuring newly designed fork boots with shorter offset, increased trail and a new suspension settings, optimally tuned to weight and engine. In addition, the fork features new fork guards allowing for easier cleaning. At the rear, a PDS shock absorber from WP Suspension works with a direct linkage to the upper side of the swingarm. A wide range of setting options for rebound damping and high- and low-speed compression damping are standard and can be adjusted to suit racing and trail conditions. FRAME The modern frame design of the 300 XC-W, comprising lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. This guarantees easy handling and precise steering behavior, as well as excellent ride stability. It clearly represents the benchmark in terms of weight and stability. Thanks to the frame design and the rear PDS damping system, impacts at the rear wheel are absorbed and dissipated optimally. For 2016 the frame is protected by a new, ro

Ktm 300 Xc W motorcycles for sale in Villa Park, Illinois

2008 Harley-Davidson VRSCDX/A - V-Rod Night Rod Special

2017 KTM 300 XC-W

2017 KTM 150 SX

2016 KTM 300 XC-W

Narrow Results

Current Search Reset All

ZIP Code

Year

Price

Options

Showcase Ads