$13,999
Watkins, Minnesota
Category
-
Engine
-
Posted Over 1 Month
2013 John Deere XUV 825i EPS 4x4, Financing available! This is an Executive Demo, still in good condition! Add $375 for installed half windshield Add $825 for installed camo Roof 50 HP, 44 MPH. The XUV 825i . Advanced Engine System Superior Terrain Capability Power Steering with anti-kick back feature Best in class ride quality Engine and Electrical Type: 4-cycle gas, Electronic Fuel Injection (EFI) Cylinders: 3 Valving: Dual Overhead Cam (DOHC) Horsepower: 50 (37 kw) @ 6000 rpm Displacement: 812 cc Maximum torque, ft.-lb. (Nm): 47 @ 3200 rpm Iginition type: Solid state 12V Lubrication: Full pressure Oil filter: Screw on filter RPM, idle (no load): 1125 +/- 75 RPM, fast (no load): Electronically controlled Cooling system: Liquid Air cleaner: Dry replaceable single element w/remote intake Muffler: Spark-arresting Battery: 340CCA Alternator: 75 amp @ 6000 rpm, regulated, 900 watts Headlights: Two 37.5 watt halogen Fuel System Capacity, U.S. gal. (L): 7 Fuel pump type: Electric 4WD System Type: On-demand true four-wheel drive system Front Differential (Engagement): Auto-locking (on/off rocker switch) Rear Differential (Engagement): Positive locking, mechanically actuated (hand-operated) Transmission Type: Continuously Variable Transmission (CVT) with clutch enclosure & engine braking Drive belt: Spun top cog, 31 mm wide Ground speed, mph (km/h): 0-44 hi forward, 0-17 lo forward, 0-20 reverse Transaxle: Two speed, oil bath Gear Selection: Forward (hi-lo), neutral, reverse Overall Reduction Ratio: Low: 86.8488:1 Overall Reduction Ratio: High: 42.1430:1 Overall Reduction Ratio: Reverse: 75.9333:1 Brakes: Front/rear hydraulic disk Park brake: Driveline mechanical disk, hand operated Bearings: Sealed, double-row ball Axle: 27 mm dia., forged CV-shaft with double offset joint Suspension and Steering Suspension, front: Fully Independent Dual A-Arm with adjustable coils Front Susp. Travel (total), in. (mm): 8 Suspension, rear: Fully Independent Dual A-Arm with adjustable coils and sway bar Rear Susp. Travel (total), in. (mm): 9 Steering: Rack and pinion Turning radius, ft. (m): 12.4 Hitch Front: Standard 2-in receiver Rear: Standard 2-in receiver Occupant Protective System (OPS) Tubular overhead structure: 1.75 steel tube Passenger grab handles: Front OPS post, front dash Seat belts: 3-point seat belts Certification: SAE J2194 and OSHA ROPS Ground Pressure (Max) With 200-lb. Operator Only, psi (kg/cm2): 14 Fully Loaded Vehicle, psi (kg/cm2): 14 Ground Clearance Ground Clearance, in. (mm): 11 Under Foot Platform, in. (mm): 12.25 Dimensions Length (w/out bumper), in. (mm): 116 Length (with bumper), in. (mm): 116 Width, in. (mm): 62 Front-tread Centers, in. (mm): 5
