2017 Husqvarna TX 300, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. Price Expires 4/29/17. 2017 Husqvarna® TX 300 THE FUTURE 2-STROKE Completely new for 2017, the TX 300 signifies the constant development and secure future of the historic 300cc 2-stroke in the Husqvarna off-road line-up. With a newly designed chassis based on the new generation 2016 FC and TC models, the TX 300 is a purpose-built closed course racing 2-stroke with off-road specific features. A larger fuel tank, an 18-inch rear wheel and a side-stand increase the ability and usability of the TX for its intended purpose. Additionally, the lightweight 2-stroke engine is efficienct, centralizes mass and features very little vibration thanks to a counter balancer shaft. As a result the TX 300 now offers a refined and manageable closed course racing package. Features may include: EngineThe 300cc 2-stroke engine has for long been the best combination of unsurpassed power and lightweight construction. The simplicity and low maintenance cost of the 2-stroke motor has made it a favorite amongst riders for generations. The TX 300 features an advanced construction with shaft arrangements aimed at centralizing oscillating mass. A counter balancer shaft reduces vibration while a twin-valve controlled power valve ensures optimal performance.TransmissionA 6-speed semi-close ratio gearbox compliments the off-road usage of the TX 300. An innovative shift lever reduces dirt build up guaranteeing easy operation in even the toughest conditions.CrankcasesThe TX 300 engine is designed with mass centralization as a key theme. As a result the lightweight, die-cast engine cases are developed to accommodate the specific location of shaft arrangements. Additionally the counter balancer shaft is integrated in a very compact manner having little affect on the compact design.CarburettorThe TX 300 features a 38mm flat slide Mikuni TMX carburettor. This carburettor provides a smooth and controllable power delivery with optimal performance over the entire RPM range. Additionally, the carburettor has minimal sensitivity to changes in temperature and altitude which reduces the need for setting changes in different conditions.Chromoly steel frameThe hydro-formed, laser-cut and robot-welded frame expertly crafted by WP Performance Systems is specifically designed with calculated parameters of longitudinal and torsional flex which best benefit handling and suspension functionality. The frame is finished off with a premium white powder coating and standard frame protectors guaranteeing supreme protection and durability.Composite carbon fibre subframeThe composite subframe i
2017 Husqvarna TE 250, Come in and check this bike out at Everett Powersports on Everett Mall Way! Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® TE 250 ENDURO REDEFINED The TE 250 takes the simple, low-maintenance motor concept that is a proven favourite of enduro riders, and progresses it with modern technological advancements. The combination of class-leading power and modern lightweight construction just got massively better for 2017. A new shaft arrangement improves mass centralisation, along with a counter-balancer shaft to reduce vibration. A new 38mm flat-slide MIKUNI TMX carburator is more resistant to altitude and temperature changes, requiring less-frequent adjustment than previous carbs. The new electric starter unit is located within the engine casings, keeping it secure from impacts. It is now linked to a lightweight and powerful Li- Ion battery for reliable starting when you need it most. Features may include: EngineFeaturing the very latest in 2-stroke technology, the TE 250 engine has a completely new construction featuring new shaft arrangements for better mass centralisation, a new counter balancer shaft reducing vibration, a new twin-valve controlled power valve and re-worked 6-speed enduro gearbox.CylinderThe 66.4mm bore cylinder features a newly developed power valve system which delivers smooth and controlled power throughout the RPM range. This can be further customised by simply changing between three springs supplied and altering the power delivery for different conditions and rider preference.Counter-balancerThe new engine design allows for the implementation of a laterally mounted counter balancer. The balancer is integrated in a very compact way and significantly reduces vibrations resulting in a smoother and more comfortable ride.CrankcaseThe lightweight, die-cast engine casings are developed to accommodate new shaft arrangements. The clutch shaft is now 8mm higher while the crankshaft position is 27mm higher centralising oscillating mass and improving ride-ability.Functional bodyworkDistinctive and futuristic bodywork highlight the impressive leap forward for MY17, while striking pearl blue and electric yellow colours and graphics stylishly adorn the Swedish inspired design. With completely new ergonomics, rider control and comfort are improved allowing the rider to perform at the peak for longer periods of time. The seat has a low profile design with a new high grip seat cover which keeps the rider planted under hard acceleration and in slippery conditions.Map select switchThe engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to rider
2017 Husqvarna TC 250, Come in and check this bike out at Everett Powersports on Everett Mall Way! Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® TC 250 HIGH INTENSITY THRILLS Completely new for MY 17, the TC 250 portrays the constant development and secure future of the historic 250cc 2-stroke in the Husqvarna line-up. With a newly designed chassis, the TC 250 sees a significant reduction in weight with increased agility and rider comfort. Additionally, the lightweight 2-stroke engine is completely redesigned and features increased efficiency, more centralised masses as well as a substantial reduction in vibration. Features may include: New engineThe 250cc 2-stroke engine is the ultimate combination of unsurpassed power and lightweight construction. The simplicity and low maintenance cost of the 2-stroke motor makes it a favourite amongst motocross riders. The new TC 250 engine has a completely new construction featuring a new shaft arrangements for better mass centralisation, a new counter balancer shaft reducing vibration, a new twin-valve controlled power valve and re-worked 5-speed gearbox.New cylinderThe 66.4mm bore cylinder features a newly developed power valve system which delivers smooth and controlled power throughout the RPM range. This can be further customised by simply changing two springs supplied and altering the power delivery for different track conditions or rider preference. The new cylinder and cylinder head incorporate a new water jacket design which guarantees better heat dissipation and improved cooling under the most extreme conditions. New cylinder head mountings secure the engine to the frame while also reducing vibrations for a smooth ride.New crankcasesIn an effort to centralize mass, the lightweight die-cast engine casings are developed to accommodate new shaft arrangements. The clutch shaft is now 4mm higher while the crankshaft position is also raised 19.5mm centralising oscillating mass and improving ride-ability. Additionally the new counter balancer shaft has been integrated in a very compact manner without compromising the overall design while new engine covers offer better resistance from wear created by riders boots.New counter balancer shaftThe new engine design incorporates a laterally mounted counter balancer shaft. This shaft significantly reduces vibrations resulting in a smoother, more comfortable ride.New frameWith years of experience in designing the most advanced steel frames in offroad, the engineers in Research and Development designed a chromium molybdenum steel frame that redefines every structural aspect that benefits handling, ergonomics and packaging. With carefully calculated tortional and longitudinal flex, the frame work
2017 Husqvarna TE 300, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® TE 300 LIMITLESS ENDURO There is no wiser choice for serious hard- and extreme-Enduro riders. Built to tackle extraordinary challenges, the 2017 model is completely new and boasts improved performance, reduced weight and smoother power across a wider rev range. Redesigned bodywork and chassis are thinner between the legs, slightly shorter front to back and less tall - keeping the centre of gravity low and centred. This makes movement easier in extreme situations. The new engine design has a laterally-mounted counter balancer shaft to significantly reduce vibrations and offers a smoother and more comfortable ride for even more hours in the saddle. WP's new enduro-specific Xplor forks and shock will make tackling the roughest terrain much easier. Features may include: EngineThe 300cc 2-stroke engine sets the benchmark in unrivalled power and lightweight construction. The engine has a completely new construction featuring new shaft arrangements for improved mass centralisation, a new counter balancer shaft reducing vibration, a new twin-valve controlled power valve and re-worked 6-speed enduro gearbox.Counter-balancerThe new engine design allows for the implementation of a laterally mounted counter-balancer. The balancer is integrated in a very compact way and significantly reduces vibrations resulting in a smoother and more comfortable ride.CrankcaseThe lightweight, die-cast engine casings are developed to accommodate new shaft arrangements. The clutch shaft is now 8mm higher while the crankshaft position is 27mm higher centralising oscillating mass and improving ride-abilityCarburettorThe TE 300 features a 38mm flat slide Mikuni TMX carburettor replacing the previous Keihin model. This new carburettor provides a smooth and controllable power delivery with optimal performance over the entire RPM range. Additionally, the new Mikuni model is less sensitive to changes in temperature and altitude which reduces the need for setting changes in different conditions.Electric and kick startThe TE 300 is fitted with a new electric starter located below the engine. This position ensures that the unit is always protected while the new design is less complex and more reliable. Additionally, the system is now linked to a lightweight and powerful Li-Ion battery which is 1 kg lighter than the previous model. A standard kick starter is fitted as a fail safe.Map select switchThe engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to
2017 Husqvarna FC 350, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.New map switchThe FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction.Engine management systemThe Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear.44 mm throttl
2017 Husqvarna FE 450, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FE 450 BOUNDLESS POWER Not that it was necessary at all, but the 2017 model has increased performance over the previous engine, with a broader spread and more torque. It is also a lot lighter and more compact. Making sense of all of that mighty power, the 2017 FE models boast an optimised new map-switch, which also activates Traction Control. Starting a bike in the most difficult positions is part of enduro riding and is why all FE and TE models come standard with an electric starter. For 2017 the bikes are fitted with a compact Li-Ion battery, 1 kg lighter than conventional batteries. The wiring harness is designed so that the rear sub-frame can be removed without removing any wiring. Class-leading BREMBO brakes control the 2017 line-up. Features may include: Tool-less air filter accessThe new airbox is designed with precisely positioned inlet ducts aimed at preventing air deformation and ensuring maximum airflow and filter protection. The air filter is easily accessed, without tools, by removing the left side panel. Easy maintenance is guaranteed by the Twin Air filter and filter cage design that features a simple fail proof mounting system for safe and accurate filter installation.CNC machined triple clampsThe 22 mm offset black-anodised CNC machined triple clamps offer premium quality and style standard on all Husqvarna enduro models. The triple clamps are been expertly crafted using superior techniques and materials to provide high levels of quality and reliability. A 2-way handlebar adjustment is standard and allows for customisable ergonomics.Functional bodyworkDistinctive and futuristic bodywork highlight the impressive leap forward for MY17, while striking pearl blue and electric yellow colours and graphics stylishly adorn the Swedish inspired design. With completely new ergonomics, rider control and comfort are improved allowing the rider to perform at the peak for longer periods of time. The seat has a low profile design with a new high grip seat cover which keeps the rider planted under hard acceleration and in slippery conditions.Electric startStandard electric start ensures effortless and reliable starting that is especially useful in difficult terrain. The system is now coupled with a new Li-Ion battery saving 1 kg over the previous model.Chromoly steel frameWhile keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiff
2017 Husqvarna FX 450, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FX 450 CLASS-LEADING PERFORMANCE Husqvarna Motorcycles new for 2017 FX 450 offers class leading performance in a lightweight, capable package. All aspects are designed to offer exceptional performance in conjunction with rider comfort and ergonomics making the FX 450 equally appealing to amateur and professional off-road riders alike. Traction control, map select and WP AER 48 forks are just a few of the standard features which ensure the FX 450 embodies premium quality and feel. Features may include: 44 mm throttle bodyThe FX 450 features the same 44 mm Keihin throttle body found on the FC 450. The injector is positioned to ensure the most efficient flow into the combustion chamber while to ensure optimal throttle response the throttle cable is mounted directly without a throttle linkage providing more immediate throttle response and feeling.EMSThe Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps via the switch on the handlebar as well as traction control. Combined with the new gear sensor, power delivery is tailored for each gear.Launch controlLaunch control is easily engaged from the handlebar map switch. This function limits the amount of power to the rear wheel, improving traction and preventing loss of control under hard acceleration at the start line.Electric starterAlong with the benefit of easy starting the electric starting system is combined with a compact Li-Ion battery which is 2.2 pounds lighter than a conventional battery. The wiring harness has been purposefully designed so that the rear subframe can be removed without having to remove any wiring.EngineThe SOHC engine is the perfect example of the advanced engineering techniques used by Husqvarna motorcycles offering a peak power of 63 hp at an overall weight of just 61.3 pounds. Mass-centralization is key in the engine design, enabling chassis engineers to position the engine closer to the center of gravity for optimal handling and maneuverability.CrankshaftThe inertia produced by the crankshaft is carefully calculated to deliver optimal traction and ride-ability from the powerful 450 cc plant. The crankshaft is specifically positioned to harness the rotating mass in the ideal center of gravity resulting in a lightweight and agile handling feel. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.Cran
2017 Husqvarna FE 501, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FE 501 LIMITLESS ENDURO More power than you'll ever be able to use - but smooth, confidence-inspiring and ride-able enough that you could quite realistically try. The 2017 FE 501's brand-new 1.7 kg lighter engine is the most powerful in the Husqvarna enduro line-up. Class leading electronics to adjust the 510.4 cc power plant's delivery while the single overhead camshaft (SOHC) cylinder-head is designed for maximum performance with minimum weight. A new camshaft actuates four lightweight valves, while more stream-lined chain guides increase efficiency and performance. The new compact crankshaft increases inertia without increasing weight, while the new big-end bearing design increases reliability and durability, for long service intervals of 135 hours. Features may include: WP Xplor 48The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up.WP rear shockThe WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption.Wheels and tiresBlack high-strength alloy rims by DID are coupled to CNC machined hubs using lightweight spokes and silver anodised aluminium nipples. Fitted to the wheels are Continental TKC80 tyres which offer superior grip on a wide variety of terrain.CNC machined triple clampsThe 22 mm offset black-anodised CNC machined triple clamps offer premium quality and style standard on all Husqvarna enduro models. The triple clamps have been expertly crafted using superior techniques and materials to provide high levels of quality and reliability. A 2-way handlebar adjustment is standard and allows for customisable ergonomics.Chromoly steel frameWhile keeping the same successful geometry from MY 16,
2017 Husqvarna FX 350, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FX 350 UNMATCHED VERSATILITY The FX 350 shares much of its engine and chassis architecture with the motocross FC 350, but is tailored for closed course off-road usage. With a maximum output of 58 hp, the FX 350 has a 450 rivalling power-to-weight ratio while retaining the light, agile handling of 250-class machines. This is matched with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Include a larger 6-speed transmission, large fuel capacity and an 18-inch rear wheel and the FX 350 is one of the most advanced off-road machines created by Husqvarna Motorcycles. Features may include: Chromoly steel frameThe hydro-formed, laser-cut and robot-welded frame expertly crafted by WP Performance Systems is specifically designed with calculated parameters of longitudinal and torsional flex. Aluminum engine mountings benefit suspension functionality and feeling while retaining a light, compact and strong package. The frame is finished off with a premium white powder coating and standard frame protectors guaranteeing supreme protection and durability.Composite carbon fibre subframeThe composite subframe is a design unique to Husqvarna showcasing pioneering technologies and innovation. This 3 piece component is made up of 30% carbon fiber making it remarkably light (3.1 lbs.) and also particularly strong. Specific care has been taken to create a certain rigidity for optimal handling and rider ergonomics.Aluminium swingarmThe hollow, cast aluminum swingarm is designed to offer optimal stiffness and reliability at the least possible weight. The machining on the side by Husqvarna motorcycle engineers is another mark of quality showcasing in depth attention to detail and superior craftsmanship.Self cleaning footpeg mountThe Husqvarna frame features an innovative, self -cleaning footpeg mount which prevents the build-up of dirt collected through deep ruts or muddy terrain. As a result, the footpeg will spring back into its original position even in the toughest conditions. For riders who prefer a higher footpeg set-up, the MY17 enduro footpegs can be fitted raising the position by 6mm.WP AER 48The 48 mm split air fork features an insulated air spring and pressurized oil chamber for progressive and consistent damping. The new component is lightweight and easily adjustable via a single air pressure valve for pre-load (on the left leg) as well as easy access clickers adjusting damping with 30 clicks (on the right leg). Additionally, the air
2017 Husqvarna FE 350, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FE 350 ENDURO PROGRESSION The perfect balance between power, weight and ease-of-use! The epitomy of versatility, the FE 350's engine has delivery and throttle response similar to a FE 250, but with broad tractable 450 rivalling performance. For 2017, the engine weighs 0.7 kg less than the old design and is also 20 mm shorter. With improved performance, mass centralisation and weight reduction, ride-ability has progressed to new levels. The FE 350 features a new six-speed gearbox with specific wide-range enduro type gearing. A low-friction shifter fork coating assists with shifting precision, while a new gear sensor allows the engine management system (EMS) to select a specific engine map for each gear. The smart new gear-lever design prevents dirt build-up, springing back into position for perfect control. Features may include: 42 mm throttle bodyThe FE 350 features an all-new 42 mm Keihin throttle body. The injector position is revised and placed to ensure the most efficient flow of fuel into the combustion chamber. Additionally, the throttle cable is mounted directly without a throttle linkage providing more immediate throttle response and feeling while also saving 100g.Engine management systemThe Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. Together with the Keihin throttle body, the system provides quick and reliable data calculation ensuring the best performance is delivered in every condition.Gear position sensorThe FE 350 features a new 6-speed gearbox with specific wide-range enduro type gearing. The shifting fork now employs a special low friction coating to ensure smooth and precise shifting. A new gear sensor allows the EMS to deliver the optimal power delivery by selecting a specific engine map tailored for each gear.Electric starterA standard electric starter guarantees easy starting. The FE 350 is fitted with a new starter motor made by Mitsuba and is combined with a new Li-Ion battery saving 1 kg over the previous conventional battery.Chromoly steel frameWhile keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new frame weighs only 8.8 kg making it 0.6 k
2017 Husqvarna FE 250, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FE 250 TOTAL ENDURO PRECISION The lightest, most compact Husqvarna 4-stroke enduro bike. Smooth 4-stroke torque and power in a much lighter and more compact chassis. A new precision-built frame offers improved agility, better bump absorption and optimum suspension functionality while only weighing 8.8 kg. New laterally-mounted head-stays increase handling agility and reduce vibration. All 2017 4-stroke models have new header pipes and shorter mufflers for maximum performance within the FIM noise limits. Enduro riders face some of the toughest conditions, always looking for positive traction to drive the bike forward. The 2017 range of 4-strokes have an optimised map-switch, which also activates the Traction Control feature. Features may include: WP Xplor 48The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up.WP rear shockThe WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption.Brembo brakesClass-leading Brembo callipers and controls with high quality GSK discs deliver superior stopping power instilling confidence in all situations. For MY17, the rear brake calliper uses a smaller piston diameter 24mm instead of 26mm, coupled with a 10mm longer rear brake lever the system delivers improved modulation and feeling.ODI lock on gripsThe ODI lock-on grip on the left side does not require gluing, while on the right, the vulcanised grip features an integrated throttle mechanism. The assembly has easy free-play adjustment and, by changing a cam, throttle progression can be altered.EngineThe new 250cc engine is re-designed to be more powerful, lighter and more compact. All major components and shaft arran
2017 Husqvarna TC 85 17/14, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration 2017 Husqvarna® TC 85 17/14 BIG PERFORMANCE, MINI PACKAGE New stylish colours and graphics adorn the MY17 TC 85. The agile and powerful little 2-stroke is equipped with the most advanced technology available in small-size motocross. The TC 85 is the ideal entry into motocross for the champions of tomorrow. Features may include: EngineThe high performance 2-stroke engine on the TC 85 features a power valve to maximise the power band and is mated to a 6-speed gearbox and a Formula hydraulic clutch for smooth and precise shifting.CylinderThe high performance cylinder has flow-optimised ports and an exhaust control valve for top performance.CrankshaftThe crankshaft of the TC 85 is optimised for maximum performance while guaranteeing durability.Gearbox and clutchThe precision-engineered 6-speed gearbox is mated to a smooth and precise Formula hydraulic clutch.FrameThe chromoly steel frame and lightweight aluminium rear subframe combine to offer unrivalled precision and rider confidence.Rear subframeThe bolt-on aluminium rear subframe is perfectly matched to the lightweight feeling of the TC 85.SwingarmThe single-component casting process eliminates welding and guarantees consistent behaviour and quality. Strong but light, the beautifully styled aluminium cast swing arm provides perfect stability and safety.WP suspensionThe TC 85 features completely adjustable WP suspension front and back for maximum performance on any track. The 43 mm upside down fork with 270 mm of travel is completely adjustable for rebound and compression damping. The PDS rear suspension offers stability and precision. The shock features complete adjustability and can be setup to perfectly match rider preference and track conditions.WheelsBlack Excel rims and CNC machined hubs play an important role in keeping overall weight at a minimum, while offering great stability as well as adding to the aggressive look of the TC 85.TyresMaxxis tyres that deliver outstanding performance on a variety of terrain are fitted as standard. The pattern design and rubber compound deliver exceptional straight-line stability and excellent traction and predictability.BrakesA Formula four piston brake caliper and 220mm wave disc at the front, and a two piston caliper and 210mm wave disc at the rear, offer superior stopping power and feeling.ErgonomicsTightly wrapped around the engine and frame, Husqvarna's bodywork is de
2017 Husqvarna FC 250, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® FC 250 RAZOR-SHARP AGILITY The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed. Features may include: EngineAll major components and shaft arrangements have been carefully designed and placed in specific positions that best suit the performance and handling characteristics of the FC 250. The 250 cc engine is not only light at 26.1 kg but also remarkably powerful with an overall power output of 46 hp at the output shaft. One way in which this was achieved was by engineering key components to produce the least amount of friction possible, reducing drag as a result.DOHC cylinder headThe DOHC cylinder head features finger followers with a DLC (diamond like carbon) coating resulting in minimal friction and optimal performance. These actuate large titanium valves (32.5 mm intake, 26.5 mm exhaust) which at the 14,000 rpm rev-limit open and close multiple times each second introducing fuel/air mixture to the carefully designed combustion chamber delivering efficient and optimal power throughout the rev-range. The cylinder head is now fixed to the frame using lightweight aluminium brackets saving 114 grams while keeping the same structural integrity.CrankcasesThe aluminium crankcases have been designed to house the internal components of the engine in the perfect position to achieve the ideal centre of gravity. The lightweight casings are manufactured using a high-pressure die cast production process, resulting in thin wall thickness while retaining exceptional reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers.Exhaust systemThe FC 250 exhaust system has been expertly designed to deliver the best possible performance while adhering to the FIM noise limits. The header pipe features a resonance chambers for optimal performance while the silencer is crafted from lightweight and strong aluminium.Magura hydraulic clutchThe FC 250 features a Magura hydraulic clutch system. The high quality German-made clutch system guarantees even wear, almost maintenance-free operation and perfect modulation in every condition. This means that play is constantly compensated so that the pressure point and function of th
2017 Husqvarna TC 50, Come check this out at Everett Powersports on Everett Mall Way in Everett. 425-347-4545.Price does not include Destination and Set-up fees. Up to $150 dealer documentation fee is applicable. No price expiration. 2017 Husqvarna® TC 50 PROGRESSION STARTS HERE Modelled after the full size motocross bikes, the TC 50 features the same striking looks and ergonomic feel in a reduced size to suite the future stars of tomorrow. The similarities between the TC 50 and the larger motocross range do not end there, a superior level of quality and attention to detail are incorporated into the TC 50 ensuring top level performance and a premium look and feel. Features may include: FrameThe high strength chromoly steel frame is produced by WP Performance Systems and integrates carefully calculated parameters of longitudinal flex and torsional rigidity to benefit handling and suspension functionality. It guarantees easy handling and precise cornering, along with outstanding stability.WP AER 35Featuring the latest in suspension technology, the TC 50 is fitted with a revolutionary WP AER 35 fork. Besides being very light weight, the 35 mm USD forks feature exceptional damping and comfort characteristics allowing the rider to push the limit with complete confidence. With 205 mm of wheel travel, the air unit in the left fork leg can also be adjusted easily with the use of an air pump for rider preference, weight or track conditions.Rear shockLinked directly to the swingarm, the WP monoshock is matched perfectly to the front forks for the perfect balance and damping characteristics. Additionally, the rear shock offers 185mm of suspension travel and is fully adjustable allowing it to be tailored to rider preferences or track conditions.BrakesFeaturing the same level of technology offered on the full-size motocross range, the TC 50 is fitted with hydraulically operated brake callipers and waved front and rear brake discs. The system ensures advanced brake feeling and stopping performance in all conditions.EngineThe modern and compact engine features the latest in 2-stroke technology offering class leading performance and ride-ability. By using a 3-shaft design, the crankshaft is positioned near the centre of gravity which not only benefits mass centralisation but also creates the ideal intake angle into the reed valve delivering top level performance. Additionally, a power reduction kit is available from Husqvarna accessories which limits the TC 50 to 5.5hp for first timers and complete beginners.CylinderThe high performance cylinder is made from lightweight and durable aluminium and incorporates a pressure controlled exhaust valve (PCEV) which provides unrivalled performance within the highly competitive 50cc class.Automatic clutch
