2017 Husqvarna FC 350, 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: EngineThe 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight.Cylinder headThe FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling.Cylinder and pistonThe 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1.CrankshaftA perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.New map switchThe FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction.Engine management systemThe Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear.44 mm throttle bodyThe FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle respon
2017 Husqvarna TC 65, 2017 Husqvarna® TC 65 SET YOUR SIGHTS ON NEW HORIZONS The TC 65 will be the first time many young riders experience a full race bike featuring a manual clutch and gearbox. This transition is made easy with a hydraulic clutch and precise 6-speed gearbox. The TC 65 features the same level of quality found on the larger motocross range with premium components fitted as standard. Features may include: EngineFeaturing the latest in 2-stroke technology, the TC 65 is highly competitive in the 65cc class. Apart from using the lightest and most durable materials, the engine features a pressure controlled exhaust valve which contributes in delivering top level performance. Additionally, the engine features a manual 6-speed transmission and hydraulic clutch allowing the rider to have full control of the power delivery.CylinderThe high performance cylinder is made from lightweight and durable aluminium and incorporates a pressure controlled exhaust valve (PCEV) which provides unrivalled performance giving the young motocross rider a distinct advantage.ClutchThe reliable and light hydraulic clutch system guarantees even wear, near maintenance-free operation and perfect modulation in every condition. Meaning that play is constantly compensated so that the pressure point and function of the clutch remain identical in cold or hot conditions, as well as over time.FrameThe high strength chromoly steel frame is produced by WP Performance Systems and integrates carefully calculated parameters of longitudinal flex and torsional rigidity to benefit handling and suspension functionality. It guarantees easy handling and precise cornering, along with outstanding stability. The subframe is fitted with 4 screws to the frame and is made of lightweight aluminium.WP AER 35Featuring the latest in suspension technology, the TC 65 is fitted with a revolutionary WP AER 35 fork. Besides being very light weight, the 35 mm USD forks feature exceptional damping and comfort characteristics allowing the rider to push the limit with complete confidence. With 215 mm of wheel travel, the air unit in the left fork leg can also be adjusted easily with the use of an air pump for rider preference, weight or track conditions.Rear shockLinked directly to the swingarm, the WP monoshock is matched perfectly to the front forks for the perfect balance and damping characteristics. Additionally, the rear shock offers 270mm of suspension travel and is fully adjustable allowing it to be tailored to rider preferences or track conditions.BrakesFeaturing the same level of technology offered on the full-size motocross range, the TC 65 is fitted with hydraulically operated brake callipers and large waved front (198mm) and rear (160mm) brake discs. The system ensures advan
2017 Husqvarna FC 250, 2017 Husqvarna® FC 250 RAZOR-SHARP AGILITY The 250cc DOHC engine has been designed in conjunction with the chassis to operate in perfect harmony. All internal components have been engineered to deliver the maximum performance and packaged in order to position the engine at the ideal centre of gravity within the chromoly steel frame. In combination with the carbon fibre rear subframe and new WP AER 48 front fork, the FC 250 is one of the most technologically advanced 250 4T motocrossers ever developed. Features may include: EngineAll major components and shaft arrangements have been carefully designed and placed in specific positions that best suit the performance and handling characteristics of the FC 250. The 250 cc engine is not only light at 26.1 kg but also remarkably powerful with an overall power output of 46 hp at the output shaft. One way in which this was achieved was by engineering key components to produce the least amount of friction possible, reducing drag as a result.DOHC cylinder headThe DOHC cylinder head features finger followers with a DLC (diamond like carbon) coating resulting in minimal friction and optimal performance. These actuate large titanium valves (32.5 mm intake, 26.5 mm exhaust) which at the 14,000 rpm rev-limit open and close multiple times each second introducing fuel/air mixture to the carefully designed combustion chamber delivering efficient and optimal power throughout the rev-range. The cylinder head is now fixed to the frame using lightweight aluminium brackets saving 114 grams while keeping the same structural integrity.CrankcasesThe aluminium crankcases have been designed to house the internal components of the engine in the perfect position to achieve the ideal centre of gravity. The lightweight casings are manufactured using a high-pressure die cast production process, resulting in thin wall thickness while retaining exceptional reliability. The iconic Husqvarna logo adorns the bronze finished crankcase covers.Exhaust systemThe FC 250 exhaust system has been expertly designed to deliver the best possible performance while adhering to the FIM noise limits. The header pipe features a resonance chambers for optimal performance while the silencer is crafted from lightweight and strong aluminium.Magura hydraulic clutchThe FC 250 features a Magura hydraulic clutch system. The high quality German-made clutch system guarantees even wear, almost maintenance-free operation and perfect modulation in every condition. This means that play is constantly compensated so that the pressure point and function of the clutch remain identical in cold or hot conditions, as well as over time.CSS clutchThe 250 cc and 350 cc engines feature a CSS (coil spring steel) clutch with Magura hydraulics and lever. The CSS clu
2017 Husqvarna TE 150, ELECTRIC START!! 2017 Husqvarna® TE 150 FEATHERWEIGHT ENDURO With a completely new design and replacing the TE 125, this is the ultimate lightweight enduro bike with a surprisingly powerful engine. New production processes allow thinner casings without compromising strength, while smarter shaft arrangement and a more compact gearbox centralise rotating masses and improve handling. It also results in a smaller, narrower and lower overall engine layout that is also much lighter. An innovative new power-valve design increases power throughout the RPM range.The TE models now all feature electric start. The 2017 2-stroke models all have a light new fuel tank made of translucent plastic for easy fuel level monitoring. Holding an impressive ten litres, the tank has a quick-release fuel cap, perfect for quick refuelling, making sure you cross the finish line ahead of the pack. Features may include: EngineThe new engine features an innovative construction featuring the latest in 2-stroke technology. As a result the engine delivers high levels of performance and usability. Additionally, the new engine is designed to improve mass centralisation resulting in better agility and reduced rider fatigue.Cylinder and pistonThe new cylinder features a 58 mm bore. Combined with an innovative power valve design that increases power throughout the RPM range, the cylinder also features a redesigned water jacket which improves cooling and increases durability. The new piston is designed to perfectly match the new cylinder layout and offer premium reliability.CrankcaseHigh-pressure die cast production processes results in a thin wall thickness and a weight saving of 600g. In order to centralise mass, the new layout features a new shaft arrangement. The clutch shaft is now 27mm higher and the crankshaft 37mm higher reducing the effect of oscillating mass for more precise handling. The historical Husqvarna logo adorns the bronze finished crankcase covers.CarburettorThe TE 150 features a 38mm flat slide Mikuni TMX carburettor replacing the previous Keihin model. This new carburettor provides a smooth and controllable power delivery with optimal performance over the entire RPM range. Additionally, the new Mikuni model is less sensitive to changes in temperature and altitude which reduces the need for setting changes in different conditions.Chromoly steel frameWhile keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for bett
2017 Husqvarna TC 50, BRAND NEW TO THE HUSQVARNA FAMILY COME CHECK THIS LITTLE BEAST OUT!!! 2017 Husqvarna® TC 50 PROGRESSION STARTS HERE Modelled after the full size motocross bikes, the TC 50 features the same striking looks and ergonomic feel in a reduced size to suite the future stars of tomorrow. The similarities between the TC 50 and the larger motocross range do not end there, a superior level of quality and attention to detail are incorporated into the TC 50 ensuring top level performance and a premium look and feel. Features may include: Frame The high strength chromoly steel frame is produced by WP Performance Systems and integrates carefully calculated parameters of longitudinal flex and torsional rigidity to benefit handling and suspension functionality. It guarantees easy handling and precise cornering, along with outstanding stability. WP AER 35 Featuring the latest in suspension technology, the TC 50 is fitted with a revolutionary WP AER 35 fork. Besides being very light weight, the 35 mm USD forks feature exceptional damping and comfort characteristics allowing the rider to push the limit with complete confidence. With 205 mm of wheel travel, the air unit in the left fork leg can also be adjusted easily with the use of an air pump for rider preference, weight or track conditions. Rear shock Linked directly to the swingarm, the WP monoshock is matched perfectly to the front forks for the perfect balance and damping characteristics. Additionally, the rear shock offers 185mm of suspension travel and is fully adjustable allowing it to be tailored to rider preferences or track conditions. Brakes Featuring the same level of technology offered on the full-size motocross range, the TC 50 is fitted with hydraulically operated brake callipers and waved front and rear brake discs. The system ensures advanced brake feeling and stopping performance in all conditions. Engine The modern and compact engine features the latest in 2-stroke technology offering class leading performance and ride-ability. By using a 3-shaft design, the crankshaft is positioned near the centre of gravity which not only benefits mass centralisation but also creates the ideal intake angle into the reed valve delivering top level performance. Additionally, a power reduction kit is available from Husqvarna accessories which limits the TC 50 to 5.5hp for first timers and complete beginners. Cylinder The high performance cylinder is made from lightweight and durable aluminium and incorporates a pressure controlled exhaust valve (PCEV) which provides unrivalled performance within the highly competitive 50cc class. Automatic clutch A key feature of the TC 50 is the automatic centrifugal clutch. This allows the young riders to focus on riding without the complexit
2017 Husqvarna FE 350, 2017 Husqvarna® FE 350 ENDURO PROGRESSION The perfect balance between power, weight and ease-of-use! The epitomy of versatility, the FE 350's engine has delivery and throttle response similar to a FE 250, but with broad tractable 450 rivalling performance. For 2017, the engine weighs 0.7 kg less than the old design and is also 20 mm shorter. With improved performance, mass centralisation and weight reduction, ride-ability has progressed to new levels. The FE 350 features a new six-speed gearbox with specific wide-range enduro type gearing. A low-friction shifter fork coating assists with shifting precision, while a new gear sensor allows the engine management system (EMS) to select a specific engine map for each gear. The smart new gear-lever design prevents dirt build-up, springing back into position for perfect control. Features may include: 42 mm throttle body The FE 350 features an all-new 42 mm Keihin throttle body. The injector position is revised and placed to ensure the most efficient flow of fuel into the combustion chamber. Additionally, the throttle cable is mounted directly without a throttle linkage providing more immediate throttle response and feeling while also saving 100g. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. Together with the Keihin throttle body, the system provides quick and reliable data calculation ensuring the best performance is delivered in every condition. Gear position sensor The FE 350 features a new 6-speed gearbox with specific wide-range enduro type gearing. The shifting fork now employs a special low friction coating to ensure smooth and precise shifting. A new gear sensor allows the EMS to deliver the optimal power delivery by selecting a specific engine map tailored for each gear. Electric starter A standard electric starter guarantees easy starting. The FE 350 is fitted with a new starter motor made by Mitsuba and is combined with a new Li-Ion battery saving 1 kg over the previous conventional battery. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new frame weighs only 8.8 kg making it 0.6 kg lighter than its predecessor. Composite carbon fibre subframe The composite subframe is a design unique to Husqvarna motorcycles showcasing pioneering technology and innovation. This 3 piece component
2017 Husqvarna FE 350, 2017 Husqvarna® FE 350 ENDURO PROGRESSION The perfect balance between power, weight and ease-of-use! The epitomy of versatility, the FE 350's engine has delivery and throttle response similar to a FE 250, but with broad tractable 450 rivalling performance. For 2017, the engine weighs 0.7 kg less than the old design and is also 20 mm shorter. With improved performance, mass centralisation and weight reduction, ride-ability has progressed to new levels. The FE 350 features a new six-speed gearbox with specific wide-range enduro type gearing. A low-friction shifter fork coating assists with shifting precision, while a new gear sensor allows the engine management system (EMS) to select a specific engine map for each gear. The smart new gear-lever design prevents dirt build-up, springing back into position for perfect control. Features may include: 42 mm throttle body The FE 350 features an all-new 42 mm Keihin throttle body. The injector position is revised and placed to ensure the most efficient flow of fuel into the combustion chamber. Additionally, the throttle cable is mounted directly without a throttle linkage providing more immediate throttle response and feeling while also saving 100g. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. Together with the Keihin throttle body, the system provides quick and reliable data calculation ensuring the best performance is delivered in every condition. Gear position sensor The FE 350 features a new 6-speed gearbox with specific wide-range enduro type gearing. The shifting fork now employs a special low friction coating to ensure smooth and precise shifting. A new gear sensor allows the EMS to deliver the optimal power delivery by selecting a specific engine map tailored for each gear. Electric starter A standard electric starter guarantees easy starting. The FE 350 is fitted with a new starter motor made by Mitsuba and is combined with a new Li-Ion battery saving 1 kg over the previous conventional battery. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new frame weighs only 8.8 kg making it 0.6 kg lighter than its predecessor. Composite carbon fibre subframe The composite subframe is a design unique to Husqvarna motorcycles showcasing pioneering technology and innovation. This 3 piece component
2017 Husqvarna FE 501, 2017 Husqvarna® FE 501 LIMITLESS ENDURO More power than you'll ever be able to use - but smooth, confidence-inspiring and ride-able enough that you could quite realistically try. The 2017 FE 501's brand-new 1.7 kg lighter engine is the most powerful in the Husqvarna enduro line-up. Class leading electronics to adjust the 510.4 cc power plant's delivery while the single overhead camshaft (SOHC) cylinder-head is designed for maximum performance with minimum weight. A new camshaft actuates four lightweight valves, while more stream-lined chain guides increase efficiency and performance. The new compact crankshaft increases inertia without increasing weight, while the new big-end bearing design increases reliability and durability, for long service intervals of 135 hours. Features may include: WP Xplor 48 The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up. WP rear shock The WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption. Wheels and tires Black high-strength alloy rims by DID are coupled to CNC machined hubs using lightweight spokes and silver anodised aluminium nipples. Fitted to the wheels are Continental TKC80 tyres which offer superior grip on a wide variety of terrain. CNC machined triple clamps The 22 mm offset black-anodised CNC machined triple clamps offer premium quality and style standard on all Husqvarna enduro models. The triple clamps have been expertly crafted using superior techniques and materials to provide high levels of quality and reliability. A 2-way handlebar adjustment is standard and allows for customisable ergonomics. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. T
2017 Husqvarna FE 501, 2017 Husqvarna® FE 501 LIMITLESS ENDURO More power than you'll ever be able to use - but smooth, confidence-inspiring and ride-able enough that you could quite realistically try. The 2017 FE 501's brand-new 1.7 kg lighter engine is the most powerful in the Husqvarna enduro line-up. Class leading electronics to adjust the 510.4 cc power plant's delivery while the single overhead camshaft (SOHC) cylinder-head is designed for maximum performance with minimum weight. A new camshaft actuates four lightweight valves, while more stream-lined chain guides increase efficiency and performance. The new compact crankshaft increases inertia without increasing weight, while the new big-end bearing design increases reliability and durability, for long service intervals of 135 hours. Features may include: WP Xplor 48 The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up. WP rear shock The WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption. Wheels and tires Black high-strength alloy rims by DID are coupled to CNC machined hubs using lightweight spokes and silver anodised aluminium nipples. Fitted to the wheels are Continental TKC80 tyres which offer superior grip on a wide variety of terrain. CNC machined triple clamps The 22 mm offset black-anodised CNC machined triple clamps offer premium quality and style standard on all Husqvarna enduro models. The triple clamps have been expertly crafted using superior techniques and materials to provide high levels of quality and reliability. A 2-way handlebar adjustment is standard and allows for customisable ergonomics. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. T
2017 Husqvarna FE 450, 2017 Husqvarna® FE 450 BOUNDLESS POWER Not that it was necessary at all, but the 2017 model has increased performance over the previous engine, with a broader spread and more torque. It is also a lot lighter and more compact. Making sense of all of that mighty power, the 2017 FE models boast an optimised new map-switch, which also activates Traction Control. Starting a bike in the most difficult positions is part of enduro riding and is why all FE and TE models come standard with an electric starter. For 2017 the bikes are fitted with a compact Li-Ion battery, 1 kg lighter than conventional batteries. The wiring harness is designed so that the rear sub-frame can be removed without removing any wiring. Class-leading BREMBO brakes control the 2017 line-up. Features may include: Tool-less air filter access The new airbox is designed with precisely positioned inlet ducts aimed at preventing air deformation and ensuring maximum airflow and filter protection. The air filter is easily accessed, without tools, by removing the left side panel. Easy maintenance is guaranteed by the Twin Air filter and filter cage design that features a simple fail proof mounting system for safe and accurate filter installation. CNC machined triple clamps The 22 mm offset black-anodised CNC machined triple clamps offer premium quality and style standard on all Husqvarna enduro models. The triple clamps are been expertly crafted using superior techniques and materials to provide high levels of quality and reliability. A 2-way handlebar adjustment is standard and allows for customisable ergonomics. Functional bodywork Distinctive and futuristic bodywork highlight the impressive leap forward for MY17, while striking pearl blue and electric yellow colours and graphics stylishly adorn the Swedish inspired design. With completely new ergonomics, rider control and comfort are improved allowing the rider to perform at the peak for longer periods of time. The seat has a low profile design with a new high grip seat cover which keeps the rider planted under hard acceleration and in slippery conditions. Electric start Standard electric start ensures effortless and reliable starting that is especially useful in difficult terrain. The system is now coupled with a new Li-Ion battery saving 1 kg over the previous model. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new
2017 Husqvarna FE 450, 2017 Husqvarna® FE 450 BOUNDLESS POWER Not that it was necessary at all, but the 2017 model has increased performance over the previous engine, with a broader spread and more torque. It is also a lot lighter and more compact. Making sense of all of that mighty power, the 2017 FE models boast an optimised new map-switch, which also activates Traction Control. Starting a bike in the most difficult positions is part of enduro riding and is why all FE and TE models come standard with an electric starter. For 2017 the bikes are fitted with a compact Li-Ion battery, 1 kg lighter than conventional batteries. The wiring harness is designed so that the rear sub-frame can be removed without removing any wiring. Class-leading BREMBO brakes control the 2017 line-up. Features may include: Tool-less air filter access The new airbox is designed with precisely positioned inlet ducts aimed at preventing air deformation and ensuring maximum airflow and filter protection. The air filter is easily accessed, without tools, by removing the left side panel. Easy maintenance is guaranteed by the Twin Air filter and filter cage design that features a simple fail proof mounting system for safe and accurate filter installation. CNC machined triple clamps The 22 mm offset black-anodised CNC machined triple clamps offer premium quality and style standard on all Husqvarna enduro models. The triple clamps are been expertly crafted using superior techniques and materials to provide high levels of quality and reliability. A 2-way handlebar adjustment is standard and allows for customisable ergonomics. Functional bodywork Distinctive and futuristic bodywork highlight the impressive leap forward for MY17, while striking pearl blue and electric yellow colours and graphics stylishly adorn the Swedish inspired design. With completely new ergonomics, rider control and comfort are improved allowing the rider to perform at the peak for longer periods of time. The seat has a low profile design with a new high grip seat cover which keeps the rider planted under hard acceleration and in slippery conditions. Electric start Standard electric start ensures effortless and reliable starting that is especially useful in difficult terrain. The system is now coupled with a new Li-Ion battery saving 1 kg over the previous model. Chromoly steel frame While keeping the same successful geometry from MY 16, the hydro-formed, laser-cut and robot-welded frame is expertly crafted by WP Performance Systems. The 6mm wider and 2 mm lower steel tubes offer 20% higher torsional rigidity while longitudinal stiffness is reduced by 30%. The increased torsional rigidity improves stability and agility while reducing the longitudinal stiffness creates increased flexibility for better bump absorption and suspension functionality. The new
2017 Husqvarna FX 350, 2017 Husqvarna® FX 350 UNMATCHED VERSATILITY The FX 350 shares much of its engine and chassis architecture with the motocross FC 350, but is tailored for closed course off-road usage. With a maximum output of 58 hp, the FX 350 has a 450 rivalling power-to-weight ratio while retaining the light, agile handling of 250-class machines. This is matched with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Include a larger 6-speed transmission, large fuel capacity and an 18-inch rear wheel and the FX 350 is one of the most advanced off-road machines created by Husqvarna Motorcycles. Features may include: Chromoly steel frame The hydro-formed, laser-cut and robot-welded frame expertly crafted by WP Performance Systems is specifically designed with calculated parameters of longitudinal and torsional flex. Aluminum engine mountings benefit suspension functionality and feeling while retaining a light, compact and strong package. The frame is finished off with a premium white powder coating and standard frame protectors guaranteeing supreme protection and durability. Composite carbon fibre subframe The composite subframe is a design unique to Husqvarna showcasing pioneering technologies and innovation. This 3 piece component is made up of 30% carbon fiber making it remarkably light (3.1 lbs.) and also particularly strong. Specific care has been taken to create a certain rigidity for optimal handling and rider ergonomics. Aluminium swingarm The hollow, cast aluminum swingarm is designed to offer optimal stiffness and reliability at the least possible weight. The machining on the side by Husqvarna motorcycle engineers is another mark of quality showcasing in depth attention to detail and superior craftsmanship. Self cleaning footpeg mount The Husqvarna frame features an innovative, self -cleaning footpeg mount which prevents the build-up of dirt collected through deep ruts or muddy terrain. As a result, the footpeg will spring back into its original position even in the toughest conditions. For riders who prefer a higher footpeg set-up, the MY17 enduro footpegs can be fitted raising the position by 6mm. WP AER 48 The 48 mm split air fork features an insulated air spring and pressurized oil chamber for progressive and consistent damping. The new component is lightweight and easily adjustable via a single air pressure valve for pre-load (on the left leg) as well as easy access clickers adjusting damping with 30 clicks (on the right leg). Additionally, the air pump needed to adjust air pressure in the fork will be provided as standard. WP rear shock The WP DCC rear shock is designed to provide advanced damping characteristics while conforming to a compact an
2017 Husqvarna FX 350, 2017 Husqvarna® FX 350 UNMATCHED VERSATILITY The FX 350 shares much of its engine and chassis architecture with the motocross FC 350, but is tailored for closed course off-road usage. With a maximum output of 58 hp, the FX 350 has a 450 rivalling power-to-weight ratio while retaining the light, agile handling of 250-class machines. This is matched with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Include a larger 6-speed transmission, large fuel capacity and an 18-inch rear wheel and the FX 350 is one of the most advanced off-road machines created by Husqvarna Motorcycles. Features may include: Chromoly steel frame The hydro-formed, laser-cut and robot-welded frame expertly crafted by WP Performance Systems is specifically designed with calculated parameters of longitudinal and torsional flex. Aluminum engine mountings benefit suspension functionality and feeling while retaining a light, compact and strong package. The frame is finished off with a premium white powder coating and standard frame protectors guaranteeing supreme protection and durability. Composite carbon fibre subframe The composite subframe is a design unique to Husqvarna showcasing pioneering technologies and innovation. This 3 piece component is made up of 30% carbon fiber making it remarkably light (3.1 lbs.) and also particularly strong. Specific care has been taken to create a certain rigidity for optimal handling and rider ergonomics. Aluminium swingarm The hollow, cast aluminum swingarm is designed to offer optimal stiffness and reliability at the least possible weight. The machining on the side by Husqvarna motorcycle engineers is another mark of quality showcasing in depth attention to detail and superior craftsmanship. Self cleaning footpeg mount The Husqvarna frame features an innovative, self -cleaning footpeg mount which prevents the build-up of dirt collected through deep ruts or muddy terrain. As a result, the footpeg will spring back into its original position even in the toughest conditions. For riders who prefer a higher footpeg set-up, the MY17 enduro footpegs can be fitted raising the position by 6mm. WP AER 48 The 48 mm split air fork features an insulated air spring and pressurized oil chamber for progressive and consistent damping. The new component is lightweight and easily adjustable via a single air pressure valve for pre-load (on the left leg) as well as easy access clickers adjusting damping with 30 clicks (on the right leg). Additionally, the air pump needed to adjust air pressure in the fork will be provided as standard. WP rear shock The WP DCC rear shock is designed to provide advanced damping characteristics while conforming to a compact an
2017 Husqvarna FE 250, 2017 Husqvarna® FE 250 TOTAL ENDURO PRECISION The lightest, most compact Husqvarna 4-stroke enduro bike. Smooth 4-stroke torque and power in a much lighter and more compact chassis. A new precision-built frame offers improved agility, better bump absorption and optimum suspension functionality while only weighing 8.8 kg. New laterally-mounted head-stays increase handling agility and reduce vibration. All 2017 4-stroke models have new header pipes and shorter mufflers for maximum performance within the FIM noise limits. Enduro riders face some of the toughest conditions, always looking for positive traction to drive the bike forward. The 2017 range of 4-strokes have an optimised map-switch, which also activates the Traction Control feature. Features may include: WP Xplor 48 The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up. WP rear shock The WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption. Brembo brakes Class-leading Brembo callipers and controls with high quality GSK discs deliver superior stopping power instilling confidence in all situations. For MY17, the rear brake calliper uses a smaller piston diameter 24mm instead of 26mm, coupled with a 10mm longer rear brake lever the system delivers improved modulation and feeling. ODI lock on grips The ODI lock-on grip on the left side does not require gluing, while on the right, the vulcanised grip features an integrated throttle mechanism. The assembly has easy free-play adjustment and, by changing a cam, throttle progression can be altered. Engine The new 250cc engine is re-designed to be more powerful, lighter and more compact. All major components and shaft arrangements are carefully positioned to best suit the performance and handling characteristics of the overall package. As a result, the engine is 20mm shorter and 0.7 kg lighter than before weighing in at a total of 27.6 kg inclu
2017 Husqvarna FE 250, 2017 Husqvarna® FE 250 TOTAL ENDURO PRECISION The lightest, most compact Husqvarna 4-stroke enduro bike. Smooth 4-stroke torque and power in a much lighter and more compact chassis. A new precision-built frame offers improved agility, better bump absorption and optimum suspension functionality while only weighing 8.8 kg. New laterally-mounted head-stays increase handling agility and reduce vibration. All 2017 4-stroke models have new header pipes and shorter mufflers for maximum performance within the FIM noise limits. Enduro riders face some of the toughest conditions, always looking for positive traction to drive the bike forward. The 2017 range of 4-strokes have an optimised map-switch, which also activates the Traction Control feature. Features may include: WP Xplor 48 The WP Xplor 48 front fork is a completely new feature developed by WP Performance Systems specifically for enduro type riding. The forks consist of an open cartridge layout with a spring in each circuit and split damping functions. Compression can be adjusted from the left side and rebound on the right via clickers situated on the top of the fork tube. Additionally, with the standard pre-load adjuster, pre-load can be adjusted by the rider without the use of tools making the new system simple and easy to set up. WP rear shock The WP DCC rear shock is designed to provide advanced damping characteristics while keeping to a compact and lightweight design. The new rear shock weighs only 3.7 kg which is 0.36 kg lighter than the previous version. With a pressure balance inside the shock, damping is improved resulting in greater rider comfort and handling while the outer contour of the reservoir increases cooling. The component is also fully adjustable and matched to a linkage system with a specific geometry to deliver the best possible traction and absorption. Brembo brakes Class-leading Brembo callipers and controls with high quality GSK discs deliver superior stopping power instilling confidence in all situations. For MY17, the rear brake calliper uses a smaller piston diameter 24mm instead of 26mm, coupled with a 10mm longer rear brake lever the system delivers improved modulation and feeling. ODI lock on grips The ODI lock-on grip on the left side does not require gluing, while on the right, the vulcanised grip features an integrated throttle mechanism. The assembly has easy free-play adjustment and, by changing a cam, throttle progression can be altered. Engine The new 250cc engine is re-designed to be more powerful, lighter and more compact. All major components and shaft arrangements are carefully positioned to best suit the performance and handling characteristics of the overall package. As a result, the engine is 20mm shorter and 0.7 kg lighter than before weighing in at a total of 27.6 kg inclu
