Husqvarna motorcycles for sale in Clovis, California

2016 Husqvarna FC 350

$8,199

Clovis, California

Year 2016

Make Husqvarna

Model FC 350

Category Dirt Bikes

Engine -

Posted Over 1 Month

2016 Husqvarna FC 350, 2016 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine architecture with the smaller FC 250, therefore combining compact dimensions, light weight and 450-rivalling power. All the packaging benefits of the new DOHC engine are matched to the most advanced electronics. Standard launch control, switchable engine maps and a faster, more powerful engine management system, guarantee that all the 58 horsepower is put to the ground in total control. Features May Include: NEW CRANKSHAFT A new stiffer crankshaft is at the heart of the high power output, high-revving FC 350 engine. The plain big end bearing and two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours. NEW ENGINE The repositioning of the crankshaft and clutch shaft, together with the complete redesign of all the internal components as well as the crankcases, results in a 20 mm shorter engine. Weighing only 27.2 kg, the 58 horsepower 350 cc engine is 1 kg lighter than the previous generation engine and is mounted closer to the centre of gravity of the bike. The multifunctional counter balance shaft reduces vibrations while also driving the water pump and timing chain. NEW CYLINDER HEAD The cylinder head retains the DOHC architecture but features a completely redesigned combustion chamber, new ports, new camshafts and new valve springs. The DLC (Diamond Like Carbon) coating on the finger followers is 30% harder, therefore reducing friction. Large, lightweight 36.3 mm diameter, 22.4 g titanium intake and 29.1 mm, 22.7 g titanium exhaust valves allow the engine to rev freely to the 13,400 rpm ceiling. NEW FRAME With years of experience in designing the most advanced steel frames in offroad, the engineers in Research and Development have designed a completely new chromium molibdenum steel frame that redefines every structural aspect in order to improve handling, ergonomics and packaging. The torsional rigidity and longitudinal stiffness have been completely rethought. The 6mm wider and 2mm lower steel tubes offer 20% more torsional rigidity and 30% less longitudinal stiffness compared to the previous generation frame design. These characteristics, matched to the new engine stays, improve handling precision while at the same time increasing bump-absorption and feeling. NEW CARBON FIBRE SUBFRAME The use of carbon fibre strips away weight, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is now 30% carbon fibre and the overall 3-piece construction is 1 kg lighter than the previous subframe, for an overall weight of 1.4 kg. It is also more compact as well as being shorter, for greatly improved ergonomics. MAP SWITCH AND LAUNCH CONTROL As in previous model years, the MY16 motocros

2016 Husqvarna FE 350

$7,799

Clovis, California

Year 2016

Make Husqvarna

Model TE 250

Category -

Engine -

Posted Over 1 Month

2016 Husqvarna TE 250, 2016 Husqvarna® TE 250 PERFORMANCE WITHOUT COMPROMISE The 250cc 2-stroke engine s 4-stroke rivalling 52 horsepower is made accessible thanks to high-tech equipment such as the adjustable power valve and CDI, now with a standard handlebar map switch, and Boyesen reed valve. Power is channelled to the rear wheel through a precise 6-speed gearbox and high quality Brembo hydraulic clutch. Class-leading 11 litre fuel capacity ensures longer running in the remotest areas, with both electric and kick starting sure to get riders out of even the most difficult terrain. Features May Include: ENGINE Tractable low-end torque and manageable high-end power are provided by the sophisticated power valve and Boyesen reed valve. The engine characteristics can be tailored thanks to the standard map switch that modifies the CDI curve between two ignition curves according to rider preference, conditions and terrain. Further optimisation of the power delivery can be obtained by varying the spring stiffness in the exhaust valve. CHROMIUM MOLYBDENUM STEEL FRAME High-strength steel of the highest quality is laser cut and robot welded to exacting standards by WP Performance Systems, according to precise torsional rigidity, longitudinal flex and weight defined by our R&D department. Finely-tuned torsional rigidity provides sharp handling and stability, while calculated longitudinal flex helps absorb impacts from the terrain, working together with the suspension for better comfort and greater feedback. The lightweight design allows riders to confidently pick faster lines while maintaining race-winning pace over extended periods of time. POLYAMIDE REAR SUBFRAME The lightweight, three-piece polyamide rear subframe is more flexible than a traditional aluminium rear subframe. Combined with the longitudinal flex of the frame and the rear linkage system, this gives riders a more comfortable and confidence-inspiring feeling on the bike, allowing them to push the limits in every condition and on any terrain. The design of the composite subframe features an integrated airbox and rear grab handles. ALUMINIUM SWINGARM A great deal of development effort has been put into designing the aluminium swingarm to reach the incredible targets that our pro riders set. The precisely designed flex of the swingarm allows riders to accurately feel the terrain, enabling them to feed the right amount of power to the rear wheel in order to optimise traction and speed. The single component construction of the aluminium swingarm eliminates welding, providing more reliability, stability and safety, as well as superior quality and consistent behaviour over time compared to other construction processes. 4CS FRONT FORK With the new offset on triple clamp and fork shoes, the 4CS setup has been revised to suit the new front-end geometry. Now in its 4th year of producti

2016 Husqvarna FE 350 S

$6,999

Clovis, California

Year 2016

Make Husqvarna

Model TE 125

Category -

Engine -

Posted Over 1 Month

2016 Husqvarna TE 125, 2015 Husqvarna® TE 125 WHERE THE FUN BEGINS Weighing only 96 kg without fuel, the TE 125 is the lightest enduro model in the Husqvarna range. With 38 hp available from the small 2-stroke engine, the TE 125 delivers top-level performance and lightning fast manoeuvrability. Strong Brembo calipers and new, more powerful discs inspire confidence, while the Magura hydraulic clutch and 6-speed gearbox provide smooth shifting for maximum control and precision. Features May Include: ENGINE The TE 125 s high performance 125 cc 2-stroke engine delivers 38 hp and strong torque across the entire rev range thanks to an advanced power valve that optimises power delivery. Boyesen reeds guarantee excellent response, durability and intake flow rates. CYLINDER AND PISTON The high performance cylinder, power valve and Vertex piston are designed to deliver strong bottom-end torque and high peak power while guaranteeing maximum reliability. CLUTCH Excellent clutch modulation, low maintenance and consistent behaviour are guaranteed by the German-made Magura hydraulic clutch. The clutch lever reduces the risk of breakage by rotating almost 90° in the event of a crash. COOLING SYSTEM WP Performance Systems radiators feature integrated routing into the frame. This system dissipates heat efficiently and guarantees optimal cooling and fitting thanks to reduced tubing. CHROMOLY STEEL FRAME High-strength steel of the highest quality is laser cut and robot welded to exacting standards by WP Performance Systems, according to precise torsional rigidity, longitudinal flex and weight defined by our R&D department. Finely-tuned torsional rigidity provides sharp handling and stability, while calculated longitudinal flex helps absorb impacts from the terrain, working together with the suspension for better comfort and greater feedback. The lightweight design allows riders to confidently pick faster lines while maintaining race-winning pace over extended periods of time. POLYAMIDE REAR SUBFRAME The lightweight, three-piece polyamide rear subframe is more flexible than a traditional aluminium rear subframe. Combined with the longitudinal flex of the frame and the rear linkage system, this gives riders a more comfortable and confidence-inspiring feeling on the bike, allowing them to push the limits in every condition and on any terrain. The design of the composite subframe features an integrated airbox and rear grab handles. NEW DISC BRAKES New disc brakes by GFK at the front and rear, feature stronger braking power and increased control with a new design. NEW FRONT END GEOMETRY Detail improvements and optimisation on the MY16 enduro bikes are based on the updated front end where a new 22mm front axle with specific fork shoes replaces the previous 26mm axle. The new axle is lighter, and the shoes have s

2013 Husqvarna Tr650 TERRA

$9,599

Clovis, California

Year 2015

Make Husqvarna

Model FE 350 S

Category Dirt Bikes

Engine -

Posted Over 1 Month

2015 Husqvarna FE 350 S, 2015 Husqvarna FE 350 S COMPETITION-LEVEL PERFORMANCE, EVERYDAY VERSATILITY With the introduction of the street legal variant of the FE 350, Husqvarna provides the freedom of everyday-riding for one of the most versatile enduro bikes on the market. With the power to rival the 450 competition and the lightweight agility of a 250, the FE 350 S is in the enviable position of having the best of both worlds. Thanks to the compact yet powerful engine, a stable and confidence inspiring chassis, a reliable and efficient electric starting system, top-of-the line standard equipment and cutting-edge technology, the FE 350 S allows riders to tackle the most difficult terrain with increased confidence and less effort. Features May Include: ENGINE The power output of the FE 350 S is more than enough to put it level with the E2 competition, while being similar in size and weight to the FE 250 engine (only 28.5 kg). The 350cc engine s smooth and easy to handle power delivery from low-down through to the 12,000 rpm limit, combined with an advanced engine management system and a slick 6-speed gearbox, ensure every rider can take full advantage of the FE 350 S s exceptional performance. ENGINE MANAGEMENT SYSTEM (EMS) The FE 350 S s engine features a Keihin electronic fuel injection and 42mm throttle body for great throttle response and engine performance that is optimised for tough Enduro riding conditions. STARTER The entire 4-stroke Enduro range features a reliable electric starter and offer the possibility to retro-fit a kick-starter. Easy starting in any situation. FRAME Enduro riding requires maximum feedback from the bike in rough terrain, on rocks and in slippery conditions. Precisely engineered flex in the frame can greatly improve rider confidence, allowing for increased speed and improved times. To achieve these goals, the engineers designed the lightweight chromium molybdenum frame with precise longitudinal flex that helps absorb impacts from the rear wheel, working together with the suspension and giving the rider greater feedback. SUBFRAME The lightweight, three-piece polyamide rear subframe has been reinforced with an additional screw on the airbox side that improves the fitment between the left subframe arm and the airbox.. WHEELS AND BRAKES Black DID rims and CNC machined hubs mated to silver anodised nipples add an aggressive and modern look to the newly designed Husqvarna Enduro range. World Championship level performance is guaranteed by Michelin Enduro Competition tyres. The wheels are kept firmly under control thanks to maximum feeling in extreme situations combined with amazing stopping power of the latest generation of Brembo brakes. Ergonomically perfect controls allow the rider to accurately gauge braking power to the 260mm

2016 Husqvarna FC 250

$8,404

Clovis, California

Year 2014

Make Husqvarna

Model TE 300

Category Dirt Bikes

Engine -

Posted Over 1 Month

2014 Husqvarna TE 300, 2014 Husqvarna TE 300 Extreme performance to take on the world Extreme Enduro conditions have met their match. The astounding power and torque characteristics of the 300cc 2-stroke engine are ideal to get riders over any obstacle. Extreme performance and low maintenance costs together with top-of-the line components, quality construction, bullet-proof reliability and electric start. The TE 300 is the weapon of choice for attacking any terrain with peerless power matched to a light and nimble chassis.

2015 Husqvarna FC 350

$8,199

Clovis, California

Year 2015

Make Husqvarna

Model FC 450

Category Dirt Bikes

Engine -

Posted Over 1 Month

2015 Husqvarna FC 450, 2015 Husqvarna® SHOCK WAVE OF POWER Strong, yet usable engine performance catapults the FC 450 into contention at the top of the 450 class. The FC 450 has astonishing force from the SOHC engine, incredible handling from the lightweight, cutting-edge chassis, and embodies the core values of Husqvarna. The standard electric start and handlebar-mounted map switch make the FC 450 one of the most advanced Motocross bikes on the market. Features May Include: ENGINE The compact SOHC design delivers exceptional power and torque over an extremely wide rev range. The accessible, class-leading performance of the FC 450 engine allows riders to confidently rocket of the corners, power down the straights and clear any jump. The single overhead cam in the cylinder head actuates four lightweight titanium valves, only 32 grams each, via lightweight and rigid rocker arms (DLC coated on the intake). The diameter of the intake valves is 38mm, while on the exhaust side it is 33mm. The broad power band of the FC 450 stretches to 11,500 rpm, peaking at 60 hp while maintaining exceptional torque low in the rev range. ENGINE MANAGEMENT SYSTEM The electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power. CRANKSHAFT, CONROD AND PISTON The FC 450 features an industry-leading Pankl produced crankshaft and conrod in order to ensure that the high power output and torque of the 450cc engine are combined with durability and long service intervals (100 hours before changing con rod, con rod bearing and crank pin). To achieve this goal, the lightweight crankshaft has a pressure lubricated plain big end bearing, and two force-fitted shells that run directly on the crank pin. The König bridge-box-type piston weighs 330g and has a bore of 95mm, it was developed to reduce engine vibration and optimise strength. The compression ratio is 12.6:1 for an amazing peak output of 60 hp. SWINGARM The single component construction of the aluminium swingarm eliminates welding, providing more reliability, stability and safety, as well as superior quality and consistent behaviour over time compared to other construction processes. The specific flex engineered into the swingarm makes the most of the Husqvarna engine characteristics in terms of traction and power. FRAME The engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal feedback and complete confidence in every situation. This was achieved by designing the li

2015 Husqvarna FE 501

$8,999

Clovis, California

Year 2015

Make Husqvarna

Model FE 501

Category Dirt Bikes

Engine -

Posted Over 1 Month

2015 Husqvarna FE 501, 2015 Husqvarna® FE 501 SPEED THROUGH SUPERIOR POWER Everything about the FE 501 is about amazing power and torque delivered in a smooth and accessible manner from low-down all the way to the top of the rev range. Maximum performance is the main objective, and superior power is the way to get there. Features May Include: ENGINE The FE 501 shares most of its engine components with the FE 450, the main difference being the 72mm stroke of the 510cc engine. The SOHC engine has been developed to offer extreme but accessible performance in typical Enduro riding conditions. The amazing torque enables riders to tackle the most extreme terrain and always rely on superb reliability. CRANK SHAFT The performance demands of highly tuned engines require the most advanced crankshaft technology to maintain high performance characteristics throughout the life of the engines. The crankshaft and con rod on the 4-stroke Enduro engines are produced by industry leader Pankl to ensure durability and long service intervals (135 hours before changing con rod, con rod bearing and crank pin). ENGINE MANAGEMENT SYSTEM (EMS) The 4-stroke engines feature a Keihin electronic fuel injection and 42mm throttle body for accurate throttle response and smooth engine performance that is ideal for Enduro-style riding. Optional Husky Power accessories allow riders to select maps via an optional switch and download engine data with a laptop via a Setting Tool. FRAME Enduro riding requires maximum feedback from the bike in rough terrain, on rocks and in slippery conditions. Precisely engineered flex in the frame can greatly improve rider confidence, allowing for increased speed and improved times. To achieve these goals, the engineers designed the lightweight chromium molybdenum frame with precise longitudinal flex that helps absorb impacts from the rear wheel, working together with the suspension and giving the rider greater feedback. The torsional rigidity has been calibrated to maximise sharp handling, with lightning fast turn-in and exceptional stability even on the roughest special tests. SUBFRAME The polyamide subframe is more flexible than a traditional aluminium rear subframe. Combined with the longitudinal flex of the frame and the rear linkage system, this gives riders a more comfortable and confidence-inspiring feeling on the bike, allowing them to push the limits in every condition and on any terrain. The inherent characteristics of the composite subframe allow the engineers to have unlimited opportunities of integrating features such as the airbox, electronics and rear grab handle. SWINGARM The one-piece construction of the swingarm guarantees consistent performance by eliminating welding points. The engineers designed specific flex characteristics that optimise tract