Husqvarna Fc350 motorcycles for sale in Colorado

1-9 of 9

Sort By

2024 Husqvarna FC 350

2024 Husqvarna FC 350

Request Price

Lakewood, Colorado

Year 2024

Make Husqvarna

Model FC 350

Category Off Road

Engine -

Posted 1 Week Ago

2023 Husqvarna FC 350

2023 Husqvarna FC 350

$8,999

Lakewood, Colorado

Year 2023

Make Husqvarna

Model FC 350

Category Off Road

Engine -

Posted 1 Week Ago

2024 Husqvarna FC 350

2024 Husqvarna FC 350

$9,499

Lakewood, Colorado

Year 2024

Make Husqvarna

Model FC 350

Category Off Road

Engine -

Posted 2 Weeks Ago

2016 Husqvarna FC 350

2016 Husqvarna FC 350

$6,199

Lakewood, Colorado

Year 2016

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2016 Husqvarna FC 350, 2016 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine architecture with the smaller FC 250, therefore combining compact dimensions, light weight and 450-rivalling power. All the packaging benefits of the new DOHC engine are matched to the most advanced electronics. Standard launch control, switchable engine maps and a faster, more powerful engine management system, guarantee that all the 58 horsepower is put to the ground in total control. Features May Include: NEW CRANKSHAFTA new stiffer crankshaft is at the heart of the high power output, high-revving FC 350 engine. The plain big end bearing and two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours.NEW ENGINEThe repositioning of the crankshaft and clutch shaft, together with the complete redesign of all the internal components as well as the crankcases, results in a 20 mm shorter engine. Weighing only 27.2 kg, the 58 horsepower 350 cc engine is 1 kg lighter than the previous generation engine and is mounted closer to the centre of gravity of the bike. The multifunctional counter balance shaft reduces vibrations while also driving the water pump and timing chain.NEW CYLINDER HEADThe cylinder head retains the DOHC architecture but features a completely redesigned combustion chamber, new ports, new camshafts and new valve springs. The DLC (Diamond Like Carbon) coating on the finger followers is 30% harder, therefore reducing friction. Large, lightweight 36.3 mm diameter, 22.4 g titanium intake and 29.1 mm, 22.7 g titanium exhaust valves allow the engine to rev freely to the 13,400 rpm ceiling.NEW FRAMEWith years of experience in designing the most advanced steel frames in offroad, the engineers in Research and Development have designed a completely new chromium molibdenum steel frame that redefines every structural aspect in order to improve handling, ergonomics and packaging. The torsional rigidity and longitudinal stiffness have been completely rethought. The 6mm wider and 2mm lower steel tubes offer 20% more torsional rigidity and 30% less longitudinal stiffness compared to the previous generation frame design. These characteristics, matched to the new engine stays, improve handling precision while at the same time increasing bump-absorption and feeling.NEW CARBON FIBRE SUBFRAMEThe use of carbon fibre strips away weight, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is now 30% carbon fibre and the overall 3-piece construction is 1 kg lighter than the previous subframe, for an overall weight of 1.4 kg. It is also more compact as well as being shorter, for greatly improved ergonomics.MAP SWITCH AND LAUNCH CONTROLAs in previous model years, the MY16 motocros

2017 Husqvarna TX 300

2017 Husqvarna TX 300

Request Price

Lakewood, Colorado

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: Engine The 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight. Cylinder head The FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling. Cylinder and piston The 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1. Crankshaft A perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours. New map switch The FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear. 44 mm throttle body The FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle response, the throttle cable is mounted directly without a throttle l

2017 Husqvarna FC 350

2017 Husqvarna FC 350

Request Price

Lakewood, Colorado

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, 2017 Husqvarna® FC 350 POWER AND CONTROL The FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivalling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package. Features may include: Engine The 350 cc DOHC engine weighs in at only 27.2 kg with a maximum power output of 58 hp. The engine is specifically designed with performance, weight and mass centralisation as key areas. As a result, all shaft arrangements have been positioned to allow oscillating masses to occupy the ideal centre of gravity while all parts are engineered to offer the best performance while adding the least possible weight. Cylinder head The FC 350 features a DOHC design with polished camshafts and DLC coated finger followers. These components significantly reduce friction and improve overall performance. Added to the design are large titanium valves (36.3 mm intake and 29.1 mm exhaust) which allow the engine to rev freely to the 13,400 rpm ceiling. Cylinder and piston The 88mm bore cylinder features a large diameter and lightweight forged bridged-box-type piston produced by CP. As a result, the relatively low oscillating masses deliver exceptional power, high revs and a very wide power band. The compression ratio is 14:1. Crankshaft A perfectly balanced crankshaft is at the heart of the high output, high-reving, FC 350 engine. A plain big end bearing comprising of two force-fitted bearing shells ensure maximum reliability and durability, guaranteeing long service intervals of 100 hours. New map switch The FC 350 features a new handlebar map switch. Optimised for easy operation, the new map switch now selects between two engine maps, operates launch control and activates a new traction control feature. Traction control works by analysing throttle input from the rider and the rate at which the RPM increases. If the RPM increases too quickly, the EMS will register a loss of grip and reduce the amount of power to the rear wheel ensuring maximum traction. Engine management system The Keihin EMS is specifically designed to be smaller, lighter and faster at processing data. It integrates launch control for perfect starts, selectable engine maps as well as traction control. Additionally, via a gear sensor, the EMS selects a power delivery tailored for each gear. 44 mm throttle body The FC 350 features a 44 mm Keihin throttle body. The injector has been positioned to ensure the most efficient flow of fuel into the combustion chamber while, in an effort to ensure optimal throttle response, the throttle cable is mounted directly without a throttle l

2015 Husqvarna FC 350

2015 Husqvarna FC 350

Request Price

Lakewood, Colorado

Year 2015

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2015 Husqvarna FC 350, 2015 Husqvarna® FC 350 BALANCE AND PRECISION With top-level performance guaranteed by the lightweight agility of a 250 and the hard-hitting power of a 450, the FC 350 carves through turns effortlessly and powers down straights aggressively. Standard equipment such as the electric start system and the handlebar-mounted map switch highlight the FC 350 s technological edge over the competition. Features May Include: ENGINE With peak power of 54 horsepower in a package of roughly the same dimensions as the FC 250 engine, the FC 350 offers 450-class performance with 250-class size. Superb engineering and manufacturing expertise combine to make the impressive engine that powers the FC 350 to the top of the power output charts. The titanium valves are ultra-lightweight, weighing only 22.4g and have a diameter of 36.3mm each on the intake side, and 22.7g with a diameter of 29.1mm on the exhaust side. Combined with the Diamond Like Carbon (DLC) coated followers, the FC 350 engine is capable of reaching a 13,000 rpm ceiling. The yellow valve cover tops-off a technological marvel. The handlebar mounted map switch is a standard feature and allows the rider to switch between maps while riding, adjusting power delivery and engine performance according to rider fatigue and track conditions. ENGINE MANAGEMENT SYSTEM The electronic fuel injection and 44mm throttle body of the Keihin Engine Management System on the 4-stroke models, combine to offer amazing power delivery and efficiency at all engine speeds. The injector was positioned on the bottom of the inlet tract for optimal air-fuel mixture, resulting in crisp throttle response and class-leading power. Great attention was dedicated to ensuring that cleaning and washing the bike will not damage the electronics. The wire harness, lead wire, and high quality sealed critical connectors ensure that a jet wash poses no threat. The throttle position sensor (TPS) is also water resistant and protected. CRANKSHAFT, CONROD AND PISTON The plain big end bearing and two force-fitted shells that run directly on the crank pin are lubricated by the engine s pressure lubrication in order to maintain durability and long service intervals (100 hours before changing con rod, con rod bearing and crank pin). The FC 350 s power output and engine characteristics require the highest quality components, therefore the entire crankshaft, together with the con rod, is produced by industry leader Pankl. The CP-Carrillo forged box-type piston combines maximum performance and reliability with minimum weight, only 270g. The compression ratio is 13.65:1. FRAME The engineers in Research and Development had clear objectives in terms of torsional rigidity, longitudinal stiffness and weight. The goal was to give the rider optimal feedback and complete confidenc

2017 Husqvarna FC 350

2017 Husqvarna FC 350

Request Price

Greenwood Village, Colorado

Year 2017

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

2017 Husqvarna FC 350, Power and ControlThe FC 350 shares much of its engine and chassis architecture with the smaller FC 250 but with a maximum output of 58 hp, the FC 350 has a 450 rivaling power-to-weight ratio while keeping the light, agile handling of the 250. This is coupled with an advanced electronics package featuring launch control, switchable engine maps and traction control resulting in a versatile, high performance package.

2015 Husqvarna TE 250

2015 Husqvarna TE 250

Request Price

Greenwood Village, Colorado

Year 2016

Make Husqvarna

Model FC 350

Category -

Engine -

Posted Over 1 Month

The FC 350 shares much of its engine architecture with the smaller FC 250, therefore combining compact dimensions, light weight and 450-rivalling power.All the packaging benefits of the new DOHC engine are matched to the most advanced electronics. Standard launch control, switchable engine maps and a faster, more powerful engine management system, guarantee that all the 58 horsepower is put to the ground in total control.