Ducati 750 motorcycles for sale in Oregon

1-4 of 4

Sort By

2000 Ducati MONSTER 750

2000 Ducati MONSTER 750

$3,900

Salem, Oregon

Year 2000

Make Ducati

Model MONSTER 750

Category -

Engine -

Posted Over 1 Month

This is a super clean and well functioning gen 1 Monster. We are original owners (my 90 year old father). It got a lot of options when it was new, including carbon fiber fairing and side air scoops, high pipes, and miscellaneous aluminum trim pieces. The bike has never been down and has been totally reliable for all 16 years. Recent maintenance includes a new battery and new belts. Tires are not old either. Mileage is 16,500. Clutch and 5 speed transmission are good. Jetting remains stock, the bike runs well with these great sounding pipes, but still gets 60mpg. There are no leaks at all. This is the last year of carburetors. They've always worked well and have never needed anything.It's a pretty bike that gets thumbs up and positive comments on every ride.

1988 Ducati 750 F1

1988 Ducati 750 F1

$14,995

Portland, Oregon

Year 1988

Make Ducati

Model 750 F1

Category -

Engine -

Posted Over 1 Month

1988 Ducati 750 F1 , 1988 Ducati 750 F1 Laguna Seca Replica.  This is NOT a Laguna Seca.   This 1988 Ducati 750 F1  is now numbered, titled, and registered in the state of Oregon.   This bike was built on a 1988 F3 400 frame, which is identical to the Laguna Seca frame all the way down to the indented down-tube for the horizontal carburetor. It was assembled by the craftsman owner using either New, New Oold Stock (NOS), or good used parts that were rebuilt and renovated as needed.  The quality of these parts is apparent when going over any square inch of the machine.  The pictures absolutely do it justice!  Completed in 2016, it only has 84km on the NOS speedometer.   The frame is powdercoated Bavarian Silver.  The steel fuel tank and fuel cap are NOS from an F1B.   The bodywork was NOS, purchased from a vendor in Australia some 12 years ago.  It is mounted with all new attachments.  The solo seat was used but in perfect condition.  The front fender is NOS Paso.  The buyer will be given NOS (and now scarce) Vitaloni mirrors which are correct for the time and also the original (and also scarce) red bar-ends.  No mirrors were mounted so that the final owner can decide on how to best equip the bike with mirrors without drilling into the fairing.  The NOS right rear turn signal was cracked and was glued/taped together in such a way that it is difficult to tell.  The Marzocchi M1R forks are fit to modified F1 triple clamps and have Ducati 851 clip-ons installed.  The Verlicchi F1 aluminum swingarm was installed to fit the wider rear wheel and was re-anodized by the builder.  All the fittings on the swingarm are NOS.  The shock is from a 748 as it fits perfectly and is modern.   The 1980's era Technomagnesio magnesium wheels are painted in a urethane epoxy to keep corrosion away, 3.25" front and 5.5" rear.  The wheels were free of corrosion when painted, but have not been tested in any way. The front brakes are 300mm new stainless/aluminum replicas of Brembo floating discs of that era.  The front calipers are four-piston NOS 851 units attached with EPM Engineering's caliper hangers.  The brake line is stainless steel.   The rear brake disc is a NOS 220mm floating Cast Iron rotor hung with an aluminum carrier clamped by a NOS of-the-era 05 2 piston caliper.  The rear line is rubber so as not to mark up the swingarm.  Both of the Brembo brake master cylinders and the Brembo clutch master cylinder are New.   The engine has a set of NOS F1B heads (bigger valves th

2015 Ducati SCRAMBLER 800 ICON

2015 Ducati SCRAMBLER 800 ICON

$14,995

Portland, Oregon

Year 1988

Make Ducati

Model 750 F1

Category -

Engine -

Posted Over 1 Month

1988 Ducati 750 F1 , 1988 Ducati 750 F1 Laguna Seca Replica.  This is NOT a Laguna Seca.   This 1988 Ducati 750 F1  is now numbered, titled, and registered in the state of Oregon.   This bike was built on a 1988 F3 400 frame, which is identical to the Laguna Seca frame all the way down to the indented down-tube for the horizontal carburetor. It was assembled by the craftsman owner using either New, New Oold Stock (NOS), or good used parts that were rebuilt and renovated as needed.  The quality of these parts is apparent when going over any square inch of the machine.  The pictures absolutely do it justice!  Completed in 2016, it only has 84km on the NOS speedometer.   The frame is powdercoated Bavarian Silver.  The steel fuel tank and fuel cap are NOS from an F1B.   The bodywork was NOS, purchased from a vendor in Australia some 12 years ago.  It is mounted with all new attachments.  The solo seat was used but in perfect condition.  The front fender is NOS Paso.  The buyer will be given NOS (and now scarce) Vitaloni mirrors which are correct for the time and also the original (and also scarce) red bar-ends.  No mirrors were mounted so that the final owner can decide on how to best equip the bike with mirrors without drilling into the fairing.  The NOS right rear turn signal was cracked and was glued/taped together in such a way that it is difficult to tell.  The Marzocchi M1R forks are fit to modified F1 triple clamps and have Ducati 851 clip-ons installed.  The Verlicchi F1 aluminum swingarm was installed to fit the wider rear wheel and was re-anodized by the builder.  All the fittings on the swingarm are NOS.  The shock is from a 748 as it fits perfectly and is modern.   The 1980's era Technomagnesio magnesium wheels are painted in a urethane epoxy to keep corrosion away, 3.25" front and 5.5" rear.  The wheels were free of corrosion when painted, but have not been tested in any way. The front brakes are 300mm new stainless/aluminum replicas of Brembo floating discs of that era.  The front calipers are four-piston NOS 851 units attached with EPM Engineering's caliper hangers.  The brake line is stainless steel.   The rear brake disc is a NOS 220mm floating Cast Iron rotor hung with an aluminum carrier clamped by a NOS of-the-era 05 2 piston caliper.  The rear line is rubber so as not to mark up the swingarm.  Both of the Brembo brake master cylinders and the Brembo clutch master cylinder are New.   The engine has a set of NOS F1B heads (bigger valves th

2013 Ducati 1199 Panigale

2013 Ducati 1199 Panigale

$2,499

Portland, Oregon

Year 1992

Make Ducati

Model SuperSport 750

Category -

Engine -

Posted Over 1 Month

1992 DUCATI SuperSport 750, 1992 Ducati 750SS. Classic Ducati styling, the SuperSport 750 was a leader on the sportbike scene. Enjoy this low mile well maintained SupertSport. Lots of low end grunt for riding around town with plenty on mid and top end speed to make you laugh from home to your destination. Turn2 Motorcycles is located in NW Portland Oregon, just minutes off of HWY 405 and only 2 hours south of Seattle Washington. Turn2 Motorcycles specializes in premium pre-owned used motorcycles. Every used motorcycle goes through a used vehicle inspection at MotoCorsa by a Factory trained Ducati Technician. Trades are wanted Financing is available Please call or email with any questions