Custom Built Motorcycles motorcycles for sale in Colorado Springs, Colorado

1-3 of 3

Sort By

Custom Built Motorcycles : Chopper Custom Chopper Bobber 250 Rear Rigid Frame 1200 Sportster Engine

Custom Built Motorcycles : Chopper Custom Chopper Bobber 250 Rear Rigid Frame 1200 Sportster Engine

$10,000

Colorado Springs, Colorado

Year 2015

Make Custom Built Motorcycles

Model Chopper

Category Cruiser Motorcycles

Engine 1200cc

Posted Over 1 Month

Custom Construction Bobber up for sale. Just completed, runs and rides excellent!! I built this bike over the last two years, its a labor of love and I hate to see it go, but its time for the next project. I have rode it a few times just to keep the fluids moving and the battery charged. It isn't perfect or a show winner by any means, but definitely a great bike for someone who wants to ride and isn't looking to spend a ton of money. The frame is a Straight Up Choppers frame bought from Demon Cycles, zero up zero out, 30 degree rack, powder coated gloss black. The front end is a DNA Gloss Black 2 under stock length. Front wheel and tire is a 21x2.15 60 spoke chrome, 90/90 21. Rear Wheel and Tire is a 18x8.5 60 spoke chrome, 250. Motor is a 1997 Sportster 1200 with a five speed transmission painted black. Motor runs very strong, new clutch pack, new plugs, and all new gaskets, totally freshened up. New stock ignition, coil, and regulator. Custom fender fabricated by me with struts and mounts. Bung King 3.5 quart Round Oil Tank filled with synthetic fluids. Bung King Battery Box filled with stock equivalent Sportster Battery. Assorted Bung King Mounts used throughout the build. High Torque Starter brand new. S&S Super E Carb brand new and properly jetted. 3.1 gallon king peanut tank with custom filler neck and petcock located to get the most fuel out of the tank. Autometer speedometer properly calibrated and currently reading 22 miles. Wires Plus custom wiring harness, with brains and key switch/starter located at the top motor mount. Two buttons on the motor mount are starter and headlight dimmer. Handle bars are 12 inch apes with exile internal throttle. All tig welded. Everything is powder coated gloss black except the fender and tank, which are dark blue. I am sure there are some small things I am missing, but if you have a question please ask and I will be more than happy to provide feedback. I have receipts for all the parts. The bike will come with an MSO for the frame and a Bill of Sale for the motor. There is no warranty for the bike. I have hundreds of hours of labor in this custom bike, and again I hate to get rid of it, but its time for another project. I am willing to deliver the bike via trailer up to 150 miles or so for the cost of fuel. But if you are the buyer something else may be worked out or negotiated. It doesn't hurt to ask. Other than that Shipping must be arranged by the buyer. I will not pay for shipping the bike. The only thing I will be able to do if you arrange shipping is delivery to the shipper and that must be within 50 miles. You may pick up the bike also. The bike is located in Colorado Springs, Colorado. NO Scammers, and I don't need help selling the bike!! This bike is easily worth $15,000, but I want to sell it so I can move on to the next project. At the same time I am not willing to take a loss on it, so I think $10,000 is a fair price for a custom motorcycle. I am willing to consider reasonable offers. Thanks for looking.

Trim Bobber Chopper

Custom Built Motorcycles : Chopper BMC Big Mike's Chopper - West Coast Chopper Pipes 100ci 96hp - 250 Tire -Low Res

Custom Built Motorcycles : Chopper BMC Big Mike's Chopper - West Coast Chopper Pipes 100ci 96hp - 250 Tire -Low Res

$8,500

Colorado Springs, Colorado

Year 2005

Make Custom Built Motorcycles

Model Chopper

Category -

Engine 1638

Posted Over 1 Month

2005 BMC (Big Mike's Chopper) 916100" Revtec Engine, Dynoed at 96hp.West Coast Chopper's PipesLess then 4600 Miles.Custom Front and Rear Wheels with a 250 Rear Tire. Avon Tires and Gel Battery are less then a year old.The engine has a compression release for easy starting.Super Bright Headlight and LED Marker Lights.Shipping can be arranged, buyer pays for shipping. Seller will pay $500 toward shipping if sell price is over $9k.Questions? Call Chris @720.660.1627 or [email protected]

Trim BMC 916

Custom Built Motorcycles : Chopper Bad Ass 2004 Demon Cycles Bobber Donnie Smith Frame HD TC88 High End Parts

Custom Built Motorcycles : Chopper Bad Ass 2004 Demon Cycles Bobber Donnie Smith Frame HD TC88 High End Parts

$7,200

Colorado Springs, Colorado

Year 2004

Make Custom Built Motorcycles

Model Chopper

Category Bobber Motorcycles

Engine 1450

Posted Over 1 Month

I am selling a 2004 custom built motorcycle. It is in good running and riding condition. It starts, stops, runs and rides like it should. This bike was built in 2004 so it shows a little bit of its age. I am told this was originally put together at Demon Cycles in Florida. It started out with a new Harley Davidson drive train (Twin Cam 88, 5 speed transmission and primary) purchased from Gary Surdyke Harley in MO. Then they installed that into a Donnie Smith Signature Series custom single down tube rigid frame. This started out life as more of a drag style bike when new (I have some pix that will go with the bike). It was brought to Colorado and turned into a Bobber by the previous owner. The engine has AMM P3 high performance ignition system. The rear brakes are by Performance Machine. The front brakes are Wilwood. The front tire is 21" and the rear is a 200/55R18. The chrome spoke wheels are in good shape. There are a couple of small scratches in the paint as seen in the pix (top of rear fender/top side of primary). The paint on the tank is starting to blister a little around the flush mount gas cap (shown in pix). There is a small oil leak from the bottom of the primary that will leave 3-4 drops of oil on the ground after riding it. One of the cable clamps has come apart (easy fix). There is some rubber from my boot left on the exhaust. Otherwise it is a clean good riding bike. This would make a great bar hopper and is sure to get attention everywhere it goes. I also have a set of passenger pegs, passenger seat cushion (suction cups to rear fender) and spare mirror (drops under handlebars) that will be included. Family life has left me little time to ride, so it's up for sale. I have a clear Colorado title in hand. Shipping is the sole responsibility of the buyer. UShip is one of the more popular shipping companies out there. I have a set of ramps and can assist with loading. If you have any questions, feel free to call or email Justin @ 719-231-6727 before 8pm MST.