Custom motorcycles for sale in Raleigh, North Carolina

Custom Built Motorcycles : Pro Street 2003 arlen ness custom motorcycle

$13,000

Raleigh, North Carolina

Up for sale is a 2003 Arlen Ness Custom Pro Street motorcycle. The bike is equipped with a Rev Tech 100 cubic inch motor which is equivalent to 1700 cubic centimeters of raw power. This bike only has 4000 miles and is barely broken in. New parts include a new starter and a new clutch. Bike also has compression releases to make starting the bike easier. The bike is in PRISTINE CONDITION. The only thing missing is YOU. For additional questions call June @ 919-475-7662.

Custom Built Motorcycles : Chopper 2006 spencer bowman chopper

$12,850

Raleigh, North Carolina

We are a local Auto Dealer and have been for 39 years, This chopper was a trade in. I will tell you everything to the best of my ability. 2006 Spencer Bowman Softail chopper 96 cu inch s and s motor. Starts right up runs and drives great.Has a few very minor scratches and nicks. Not a Show bike in my opinion, but great looking. Call 919-369-3681 with any questions

Trim Spencer Bowman

Custom Built Motorcycles : Other Custom Honda Ruckus Root Beer Metallic

$8,500

Raleigh, North Carolina

Buying a completely Honda Ruckus from someone you don't know? There are many questions you should ask yourself before making this big purchase…. What harness does the bike have? How was harness installed? (any cut wires, how is the solder, under battery box photos?)Do they have a proven track record in the Ruckus community?Close up photos of all the wiring components! I can tell you from personal experience as I have bought many previously built bikes, and they all left something to be desired. Maybe the wiring wasn't completely tucked, or something simple like the bike doesn't turn on! You truly never know who built the bike and how it was built…or used! No crap loom used here!No crap fuel lines used here!No crap soldering work on this bike!No crap wiring work to see people!No crap anywhere on this bike! This bike was built with professionalism and simplicity in mind. I started out to create a "Root Beer Float" color combination and the end result shows my vision. Under the battery box is cleaner than most Ruckus in the nation, and that is what matters most. The key electrical components are stored in here so cleanliness is imperative. This bike was a ground up build, starting with a front frame and rear frame! I purchased nothing but the best parts available for this build, which shows in the photos. The color is called Lazer Root Beer, from Prismatic Powders. Almost every single piece of this bike was powder coated or painted to match. The rear frame was completely shaved and drilled for a partial wire tuck. All welds and unfinished metal were TIG welded and molded before being powder coated. The battery box and gas tank cover were color matched in Root Beer Metallic. Everything was clear powder coated to give it a high gloss shine. Weekly, I wash/clay/polish/wax the painted and powdered surfaces constantly keeping this bike spotless! This bike is running a Makoa GY6 harness which is by far the best harness out there for these bikes, simplicity is key here folks. I have built many Ruckus' and never have had a ruckus start up and idle and run as good as this one, it is a factory freak. The motor is a big bore 171cc with an A12 race cam. GPS speeds recorded at 73mph on flat roads! It has tons of torque from stoplight to stoplight. It has one small nick on the rear frame under the right side peg from test riding, full disclosure. Everything else is MINT, as you can tell from the pictures. The bike has less than 75 street miles. Oil has been changed once for overkill. Bike runs flawlessly. Starts up every time with no issues. Cruises at 65, easily hits 68-70 mph. Fastest on flat roads, 73mph. I have put over $14k into this bike to make it is what it is today. I am not asking for it all back, I am asking a lot less. I am selling this bike to start a new 2015 project over the winter! I will not deliver the bike, you are responsible for pick up. This will give you the chance to go over the bike with me in person, ask all the questions you may have, and I'd be happy to help in anyway. Good luck and hope you enjoy drooling ! Root Beer Metallic Honda RuckusCustom 2 piece Ruck House Concave Billet Wheels 12x4F 12x8R (Root Beer Lips/Cream Centers)Dress Up Hardware/Bolts powdercoated Gloss CreamAvon Viper Stryker 140/70/12 Rear Tire171cc Big Bore GY6 MotorPowdercoated Wrinkle Black Valve CoverNCY CoilA12 race camHelix Fuel LinesUni Filter (Red)Gates Kevlar 842 belt30mm CVK Carb114 JetNCY CVT Transmission Kit with 1500 springRear Hub powdercoated Gloss CreamFLP CVT Kick StandCafe Style BarPassword JDM StemBikemaster Foam GripsNCY Throttle TubeCNC Disc/Drum Brake LeversStage 6 ControlsComposimo Gloss Cream Gas CapLED Light Bar HeadlightPowdercoated Ink Black & Shaved Triple TreeRRGS Low Down Forks w/Composimo Lowering SpringsNCY Titanium Front AxleRRGS Root Beer Metallic Front CaliperRRGS 220mm Rotor w/Cream InsertsNCY Titanium Rotor BoltsPowdercoated Gloss Cream Front HubGoodridge Front Brake Line92" Extended Rear Drum Brake CableNCY Gas Tank Cover (Root Beer Metallic)Hot Rod Hell Rear Gas Tank Cover (Root Beer Metallic)Composimo Frame Caps (Root Beer Metallic)Dorf Seat Frame (Root Beer Metallic)Custom Memory Foam seat with Alligator Inner & Distressed Leather OuterMNNTHBX TailightRucksters KeyRear Lug Nuts (Gloss Cream)Composimo GY6 Fatty Mount Powdercoated Root Beer MetallicSteady Garage GY6 Big Bore HeaderATR coilover w/ Gloss Cream SpringMNNTHBX Pegs (Root Beer Metallic)New agm batteryTRS Led Front Turn SignalsRucksters Front and Rear Foot Bars

Custom Built Motorcycles : Chopper Choppers Inc - Custom Chopper - Shovelhead - Genuine - Hand Built by Blly Lane

$32,000

Raleigh, North Carolina

Up for your consideration is a one-off custom chopper hand built by billy lane. The bike is titled as a 2003, however the build was not completed until late 2004. I personally took delivery of the bike at Billy's old shop in Melbourne, FL on July 11th, 2005 and it has been in my possession ever since. The bike has been ridden. It has scratches, nicks, minor paint defects, and the old 1960's 4-speed leaks oil. As I stated, I bought the bike with the intention of ridding it, not showing it. Having said this, I am VERY meticulous of my things so I personally feel its in great shape give its year, and the fact that it was used as intended. The S&S 103 Shovelhead runs strong. Over the past 2 years, responsibilites have prevented me from riding it as much as I'd like to. Regardless it has been stored in a climate controlled garage. Why am I selling? I'm just ready for something new. In retrospect, I most likely will regret selling it, but my current financial state will only allow me to own 1 bike at a time, so I need to sell this to build another. Anyway, below are some of the highligts: S&S 103 Shovelhead (Morris Mag, Kick-Only) Actual Klein Wrenches for forward controlls and shifter Hand made 2.5 gallon tank (1948 Desoto hood ornament) Mondo springer 240 rear tire w/ Exile Sprotor Hand-tooled leather seat (Adam Croft) Hand made sissy bar (originally this was not on the bike, I brought it back down to billy in early 2006 for this) Paint & stripping by Joe Richardson Milage is a guestimate as there isn't an odometer. NO warranty is expressed or implied. Shipping is the responsibility of the winning bidder. Bike is located in Raleigh, North Carolina Chopper is for sale locally, so I reserve the right to end the listing at any time. PLEASE feel free to contact me with any questions, and all REASONABLE offers will be strongly considered.