Buell 1125cr motorcycles for sale in Raleigh, North Carolina

2009 Buell 1125 CR

$6,000

Raleigh, North Carolina

Midnight black. Only 5550 miles. New three compound rear tire. Always garaged and maintained. Stock. This is a second bike and I do not have enough time to ride her. Wired for Battery Tender. The 1125CR is Erik Buell’s 21st century interpretation of the classic café racer. Dry weight of only 375 pounds. This 1125cc DOHC V-Twin engine features a compact, 72-degree design and is rated at 146 crankshaft horsepower and 82 ft. lbs. of peak torque. The frame doubles as a 5.3 gas tank, keeping weight lower. The 1125CR is geared lowe than the 1125R and is quicker. That means 0-60 quicker than 2.8 seconds.A Hydraulic Vacuum Assist Slipper Action clutch features hydraulic actuation from the hand control with assistance from engine vacuum for lighter clutch effort and reduced engine braking. Low 76/27 (2.815:1) final-drive gearing produces outstanding acceleration. A ram-air system pressurizes the 12-liter air box for a gain in peak performance. Twin side mounted radiators within aerodynamic cowlings lower the center of gravity (cg) and centralize mass. The exhaust system features an underslung muffler mounted below the engine to optimize cg location and mass centralization.Buell Helicon 1125cc liquid-cooled, four-stroke 72-degree V-Twin engine146 peak hp @ 9800 rpm82 ft. lbs. peak torque at 8000 rpm76/27 final drive gearing optimized for accelerationUnderslung muffler with Helmholtz chamberDDFI 3 Electronic Fuel Injection ECMRam-air pressurized air boxTwin side-mount radiatorsHVA (Hydraulic Vacuum Assist) Slipper Action clutchZTL2 four-pad, eight-piston front brakeFully adjustable 47 mm Showa inverted forkFully adjustable Showa rear shock absorberFuel-in Frame 5.3-gallon capacityDry Weight: 375 poundsWheelbase: 54.5 inchesSeat height: 30.5 inchesPirelli Diablo Corsa III tiresPre-Wired for Accessory Heated GripsEngineEngine: Helicon™ liquid-cooled, 4-stroke, 72° V-Twin Valves Dual OHC, four valves per cylinder, finger follower design and shimmingBore x Stroke: 4.055 in. x 2.658 in.(103.00 mm x 67.50 mm)Displacement: 68.7 cu. in. (1125 cc)Compression Ratio: 12.3:1Fuel Delivery: Dual 61 mm down draft throttle bodies, DDFI III fuel injectionIntake: Zero-resistance airbox, pressurized RAM air intakeExhaust: Tuned, tri-pass resonance chamber with intergal helmholtz tuning and mass-centralized mountingTorque: 82 ft. lbs. @ 8000 rpm (111.2 NM @ 8000 rpm)Horsepower: 146 hp @ 9800 rpmLubrication: Dry-sump with integrated oil reservoir in lower crankcaseOil Capacity: 10 2.7 qts. (2.6 L)Oil Filtration: Disposable cartridge and washable strainer